For desktop and laptop, I always prefer desktop. The reason is very simple. I like high performance, but the budget is limited. The same desktop configuration is higher. However, the price performance ratio of the products from agricultural enterprises is higher for the products from internet and AMD. So the bulldozer series of agricultural enterprises is my favorite, such as the FX8300. The FX8300 is cost-effective, but it is also a small stove. Therefore, the radiator is more important for it. I'm lucky to be here this time Love to play computer games Get a chance to experience the Blizzard T610P air-cooled radiator at Kuma's home. Blizzard T610P supports the whole platform, so my AM3+can be used naturally. Now I will share my experience with you.

I have a big impression of the Blizzard T610P radiator. Compared with the packaging of similar products, it is much larger, even higher than the Cool Mom V650 power supply. The size is not good, and the weight is not light. It can also be regarded as the embodiment of the size and weight of every penny. The main colors of the package are black and purple. The front is completely black and the side is purple. Although I have rarely seen such a combination, I feel it is relatively harmonious. Front product drawing, rear parameters. But most of the words are in foreign languages, which gives me a headache for people with poor foreign language skills.

Because of express delivery, the outer package is obviously wrinkled, and before unpacking, I am actually worried that the product has been damaged. But after unpacking, I found that the radiator was wrapped in thick black foam, which was safe and intact.

The T610P supports the installation of AMD and Intel dual platforms, so many installed accessories may be a bit bulky at first glance, but if you read the manual carefully, you will find that it is not difficult to find the right accessories and install them according to the drawings. In fact, it is very simple.

The size of T610P is not small, 122.3 * 112.8 * 166.5mm, and its weight reaches 1120g. It is very aggressive, but I am also worried about whether my body can fit.

T610P is designed with aluminum metal fins. The fins are about 0.4mm thick and 2mm apart from each other. The edges and corners are slightly passivated.

T610P adopts double fans for heat dissipation. The fan adopts snap in design, which is easy to disassemble. Because it needs to be removed first during installation. The T610P fan supports PWM speed regulation, with a rotating speed of 600 to 1800 ± 10% RPM, and provides 53.38CFM ± 10% air volume. According to some data, the noise level is only 31 dB, but because the ambient volume is far greater than this number, it cannot be tested.

The T610P is equipped with 6 U-shaped pure copper heat pipes, which is much better than the previous two radiators. The diameter of copper heat pipe is about 6mm, which directly contacts the base, and the workmanship is very flat.

The fence type base can increase the heat dissipation area, and the auxiliary effect is better.

When installing, you must read the manual. If you don't read it, you will be like me, full of tears. Remove the fan and top cover before installing T610P. In this way, the radiator will be much slimmer, and there will be enough hands in the limited chassis.

To illustrate, my platform is AM3+, and the T610P can be installed directly without replacing the motherboard accessories. So instead of removing the motherboard, I installed it directly in the chassis, which is more convenient.

The installation was successful. The unfortunate event I expected really happened. The cover of the chassis could not be removed. Fortunately, it was just a little short. The radiator top cover was just removed.

The RGB light effect of T610P has been certified to be compatible with ASUS Aura, ASRock RGB, Gigabyte Fusion, and MSI RGB motherboards. However, my old Seven Rainbow 970A can only be adjusted by the controller. There are three buttons on the T610P controller: brightness, color and mode. You can set your favorite light effect. However, if you want to change the lamp changing effect in the future, you can only open the box. Of course, players who are good at DIY can also configure their own remote control.

Original radiator

T610P

Before and after replacing the T610P, the standby temperature is about 30 degrees. But once the toaster is baked, the effect will come out. The CPU temperature under the old radiator has risen by 69 degrees, while the T610P is only more than 40 degrees. The difference effect is too obvious. Of course, there is a big difference in price. The original radiator (I have forgotten the brand and model for a long time) is only a few dozen, and you can buy it for every penny. However, my old motherboard does not display the fan speed of the T610P. The reason is unknown.

Summary:

After several days of use, my biggest impression of the T610P is that it is large and full of portions. If there is any dissatisfaction, it is too large, and my chassis cannot fully accommodate it. The price of this T610P is 299 yuan, which is almost the same as some low-end water-cooling devices. To be honest, its heat dissipation effect is very strong, much stronger than the low-end water-cooling device I used before. As long as, I can't make a comparison this time because I have leaked liquid from the water-cooling system. In terms of the design and materials of the product itself, the T610P is sincere and can definitely afford the price.

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)