For computers, whether laptops or desktops, the increasingly high CPU performance has brought a refreshing use, but also accompanied by the generation of high heat. Natural heat dissipation is an unavoidable problem. After all, the heat dissipation performance is directly related to whether the device can operate for a long time or normally and stably in the game. Compared with the thermal design of notebook, desktop computers have more room and fun to DIY. Generally, the cooling effect can be improved by adding fans to the chassis to construct exhaust channels. As for the E-sports game consoles with higher configuration above the middle tower, it is necessary to choose water cooling and air cooling for more efficient and rapid cooling effect.

As time goes by, more and more players are not rigidly attached to the monotonous design of traditional heat dissipation and prefer light pollution. Whether it is RGB fans, LED memory modules or the water cooling and air cooling of RGB lights, they have already become popular. By matching different lights, they can transform their favorite computers to enhance the cool and cool feeling. As a player who has been exposed to computer storage since 2002, he has also witnessed the changes of CPU cooling fan from small to large, from no light to 1680W RGB light, and from no traditional air cooling to water cooling. But no matter what kind of cooling method, what is the first big premise to consider? Low noise or even muted sound cannot affect the mood of the game because of the huge noise caused by the improvement of heat dissipation performance, especially when one is quietly surfing the Internet at night or playing the game at a low volume.

As a traditional and old radiator manufacturer, Kuma (Kuleng Supreme) has also begun to participate in the peripheral industry in recent years, but has been constantly improving the performance and specifications of its own radiator design, whether it is traditional air cooling or water-cooling radiator. As a promising youth (unmarried at that time) who once saved computers four or five times a year, the cooling fan, like the motherboard and memory module, has become a fixed user of some brands after going through the stages of original installation, copying and branding. Three of the five old mainframes currently reserved are Cooma fans and two are Intel original fans. The one in the following figure is the most intact one among the five fans, and the noise is also very low.

For this Cool Mom air-cooled radiator Blizzard T610P, the cooling mode is traditional air-cooled, but the number of fans has been increased to two, with a 12cm large fan on the left and right sides and its own RGB light. It supports both Intel and AMD platforms, and supports AMD's latest Ryzen platform using the new AM4 interface, The price of 299 yuan is the same as that of B120, the water cold ice god.

As a radiator supporting 16.7 million RGB lights, it also supports ASUS ASROCK、 The light synchronization function of Gigabyte and MSI motherboard manufacturers can be said to be another selling point of this product, which is convenient for light management through corresponding software and more convenient for control.

The Cool Cool Blizzard T610P adopts the traditional single tower structure design, which is larger and weighs 1.13KG at the same time. It is already a very important air-cooled radiator.

The T610P radiator body has a 4PIN RGB SYNY interface and two 4Pin fan interfaces. The RGB SYNY interface is directly connected to the motherboard supporting light control or connected to a separate RGB controller to achieve light control.

Here is a blackboard. The overall height is 16.3cm, so before purchasing, first measure the height from the CPU in the chassis to the edge of the chassis to see if the radiator can be accommodated, so as to avoid the trouble of closing the chassis cover after installation due to insufficient space.

The T610P radiator is equipped with two 120mm MasterFan 120 AB fans as standard. In the installation design of the fans, the way of non-traditional screw fixation is adopted, but the buckle design is adopted, which is convenient for installation and disassembly. It is worth noting that these two MasterFan 120 AB fans are silent fans, which support PWM speed regulation function. When the occupancy rate is low, the speed can be automatically reduced to reduce noise, but this function needs to be supported by the motherboard.

The MasterFan 120 AB fan is designed with 9 fan blades, and the speed is 650-2000 rpm. So here's a question. Is the bearing ball, hydraulic or oil-bearing? The ball bearing is naturally used, which has the advantages of quiet and long service life.

The radiator itself adopts the common all aluminum metal fin design. The fins are neat and even. In the appearance design, they are standard. The thickness is 0.4mm, and the spacing between them is 2mm. Each fin is relatively thin. The fins are very soft and easy to be scratched or deformed.

For the radiator, Cooma has enough design basis and is relatively excellent in design and materials. The T610P radiator uses six pure copper heat transfer tubes with a diameter of 6mm, which are directly welded to the copper heat dissipation base. Relatively speaking, the increase in the number of pure copper heat transfer tubes improves the heat dissipation performance to a certain extent.

The copper base not only looks better, but also is most useful in the final heat dissipation effect. In addition, the aluminum fence design above the base further increases the heat dissipation area and improves the heat dissipation effect.

In terms of accessories, T610P also provides an independent RGB controller, corresponding wires and adapters to directly control the light. For mainboard users without independent RGB pins, they can also manually adjust the light to experience the fun of light effects.

The T610P radiator supports AMD and Intel dual platforms. It naturally includes both AMD and Intel's corresponding fastening accessories in the accessories. The accessories are complete and all adopt standard specifications, so there will be no major problems in installation. The two in one design of the backplane fastener is still used. In addition, a small tube of silicon grease is used to dissipate 1g of heat in a single factory, which is convenient to reapply when installing water cooling. It is more intimate and practical.  

I used to be obsessed with saving computers, but now I have a few desktop computers that are not high in configuration. Usually they are mainly laptops, and desktop computers are mainly used as storage devices and download tools. The desktop computer that is usually in use is also configured a few years ago, the AMD Athlon X46 860K+8 memory+1050 graphics card. Most of the games before 2016 can be played, such as GTA5, Xiaoxiong, watchdog, etc. After starting the GTA5 with the original radiator, the temperature directly increased by 78 degrees during loading, and the fan speed directly increased by 1790 rpm.

If the holes reserved on the motherboard cannot be installed directly after the corresponding screws are installed, then the official X-type dual-use base is required to ensure the normal installation of the radiator. However, it is still hoped that the buckle design can be adopted, and the buckle can be directly used for fixing. The tool free installation is the king's way.

Let's talk about installation first. The installation of AMD platform is very simple. Gigabyte's board FM2+/FM2, within the scope of T610P support, unloads the original radiator, removes the original bracket, and replaces it with the standard bracket for fixation. At the same time, scrape off the silicone on the CPU surface for reapplication. T610P first remove the fans on both sides, because the radiator needs to be fixed with screws, and the fan blocks the position of the screws.

The second part is to connect all kinds of wires and install fans. For the light controller, there is a fool proof design. Pay attention to the triangle logo.

The noise during operation is very low, and the sound of fan rotation can hardly be heard. The measured noise is about 19dB. After installation, the heat sink is far away from the graphics card, but very close to the memory module. If you use a memory module with its own housing, it may not plug in the memory module. In addition, I encountered a problem that the light did not turn on once. It can be seen from the following figure that the light did not turn on. No light came on in the corresponding light belt, no matter the fans on both sides or the front.

So I plugged all the wires again, but it still didn't solve the problem. I was afraid that the wires or the radiator would be damaged. Later, I tried to change the power supply part of the connection controller. When I changed to another power supply connector, the light turned on normally.

After careful inspection, it is found that the poor contact of the connector may cause the failure of normal power supply, and the jacks 2 and 3 in the middle have been opened.

The following comments are made on the lighting and cooling effects. The lights are gorgeous and beautiful. As mentioned earlier, this kind of radiator supports linkage. It can be combined with ASUS AURA SYNC, ASROK RGB of Huaqing, RGB FUSION READY of Gigabyte, and MYSTIC LIGHT SYNC motherboard light effect control technology of MSI to achieve the effect of controlling this RGB radiator through the motherboard. It can be controlled uniformly through the drive, making operation and control more convenient. The motherboard does not support the motherboard light effect control technology, so it can only be matched with a light controller to control the light.

Through the light controller, you can quickly adjust six light effect modes, seven colors and five brightness. The controller supports the memory function, so it is convenient and practical to not need to make relevant settings every time the machine is turned on and off.

As for the change in temperature, see what the changes are. Also set the room temperature to 23 ° C constant. Here is a comparison of the same price of the Cool Cold Supreme Ice God B120, one water-cooled and one air-cooled, just to make a comparison.

The intuitive change is that the CPU temperature after boot is reduced from 53 degrees to 17 degrees; The fan speed is reduced from 1369 rpm to 702 rpm, which is much quieter than the original cooling fan.

Compared with the Cool Cool Ice God B120, the CPU temperature is not different, but the fan speed is smaller, 200 revolutions less.

Let's look at the temperature change of 24 minutes running in the AIDA64 pressure mode. It can be basically maintained at 66 degrees, while the fan speed is only 996 rpm, and the noise has not increased much.

For the part of the game, two games are selected here, one is the watchdog and the other is GTA V. At the same 20 ℃ room temperature, first use the T610P radiator for experience. Each game runs for 1 hour, records the temperature, and then shuts down for half an hour to play another game. Then replace it with water-cooled 120 and repeat the above content. From the screenshots of the two games, it can be seen that the cooling effect of the air-cooled T610P is basically the same as that of the water-cooled 120, so it is not necessary to worry too much about whether to buy the water-cooled 120 or the air-cooled T610P for 299 yuan, and the similar cooling effect can be achieved.

For any radiator, whether it is original, air-cooled or water-cooled, it must ensure the effectiveness and efficiency of heat dissipation, and at the same time, it must not bring serious noise to affect daily use. There are two suggestions for the Blizzard T610P air-cooled radiator of Kuma. One is that it is recommended to use the pull type tightening method, which can achieve tool free installation and avoid the trouble of disassembling the fan and using the screwdriver.

The other is the impact of the side fan on the memory module position after the installation of the heat sink. For some mainboards, the problem of occupying slots exists. After all, some mainboards also have two slots. At present, the problem of affecting memory can be solved by disassembling the fan. However, idle fans are wasteful. Then the possible adjustment method for subsequent products is to adjust the fan installation position. After all, there are three other options.

Briefly summarize this T610P air-cooled radiator,

First, they did a good job in terms of heat dissipation and silence. They didn't make too much noise because of their excellent heat dissipation performance.

Second, it supports both Intel and AMD platforms, with complete accessories, relatively simple and convenient installation, and excellent workmanship design, which conforms to the style of old brand manufacturers.

Third, as an air cooling model, compared with its own water cooling at the same price, there is no leakage problem that some players worry about in their daily use, and there is an additional choice for players struggling to choose water cooling or air cooling at the same price.

Fourth, as a radiator that supports RGB lights, the lights are more gorgeous and the modes are more diverse. It is compatible with the light control protocols of the four mainstream motherboards, which is convenient for the corresponding software on the PC side to operate and set. At the same time, it has its own RBG controller, which can also let ordinary motherboard users play with lights, and has high playability and practicality.

In general, as an air-cooled radiator with its own RGB light, it is suitable for players who have demands for cooling, noise and light as well as those who are worried about water cooling.

thank Love to play computer games Provide valuable product experience opportunities.

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)