|Preface

For computers, high configuration has always been my long-term pursuit. For the sake of performance, I have always insisted on using desktop computers. With the continuous upgrading of CPU, I have also become more and more cautious in the selection of heat sinks, which should not only have a good heat dissipation effect, but also be quiet. The shape and lighting effect should also be cool. This is the reason why a good horse should be equipped with a good saddle. The brand of Kuleng Zhizun has been familiar to me since I first came into contact with computers Love to play computer games The launch and trial of his family's Blizzard T610P air-cooled radiator, and full platform support, naturally made me excited, so I should apply for one to try, and then come with me to experience.

|Unpacking

The outer package of the Cool Cool Blizzard T610P radiator is very large compared with other radiators. It is almost the same size as the package of a power supply. The weight of more than 600 grams is also very heavy on the hand.

Let's take a look at the detailed parameters of this radiator. The full platform support is not much more. Its length, width and height are 130.9mm * 112.8mm * 166.5mm respectively. Here, we should pay special attention to the height of 166.5mm to see if it is suitable for our own chassis. In addition, the size of the fan is 120mm * 120mm * 25mm, and the speed is 600-1800 RPM.

This is all the items in the package. In addition to the huge radiator, there are also instructions and a large package of accessories, including the backplane, bracket, screw, sleeve, buckle, adapter cable, light regulator, etc. that are suitable for AMD and INTEL respectively. In addition, a tube of silicone grease is also included, which is complete in addition to the screwdriver.

|Details

If you want to use one word to describe the Cool Cool Blizzard T610P radiator, it is "Cool". The super large volume coupled with large caliber dual fans gives me a strong confidence just by looking at the shape.

On the top of the radiator is a shield shaped cover that blocks the radiator fins. The logo of "COOLER MASTER" in the middle looks very aggressive. Look carefully, there are LED lights hidden in the gap of the edge.

Six direct contact heat pipes are designed at the bottom of the radiator and embedded in the radiator fin, which can ensure good thermal conductivity.

Then look at these two super large fans. The 120mm diameter enables them to work at a lower speed during operation, thus achieving the effect of silence.

The fan is designed to be buckled for disassembly and assembly, which can be easily removed with a simple break by hand. It is very convenient to operate. In addition, there is a pin on the top cover for positioning the fan, which should be aligned during installation.

After the fan is removed, you can see the tall cooling tower. On closer inspection, its process is very exquisite. The edges of each cooling fin have been treated, which is not easy to hurt your hands.

The work of the fan is also very meticulous, and the edges of each blade are thickened.

|Installation

The following is a detailed presentation of the installation process of the Cool Cool Extreme Blizzard T610P radiator. Due to its large size and weight, the installation is slightly more complicated than some small radiators, mainly because all fixed parts need to be screwed. Before installation, the socket of the fan must be disconnected, and the fan must be removed to expose the screw hole on the base.

After removing the fan, it can be seen that there is a square hole in the middle of the cooling tower for wiring. Remember to sort out the connecting wires plugged in the hollow part.

Then remove the stickers at the bottom of the radiator. This step is often forgotten, and the effect of the radiator will be greatly reduced.

I am Intel's CPU (i7-3770K). Please refer to the manual to sort out the necessary accessories, including backplane, bracket, screw, fastener, controller and silicone grease.

The first step is to install the bracket on the base. Attention should be paid to the orientation of the screws.

Then place the square screw on the four feet of the base plate and fix it with a special fastener. Here, pay attention to the clamping position of the fastener. Do not clamp it to the end, and leave some redundancy.

Then align the backplane with the hole on the back of the motherboard and install it, and use a special sleeve on the front of the motherboard to install and fix the base.

Next, apply silicone grease on the surface of the CPU. The silver silicone grease is also included in Cool Cool Supreme, which looks very good.

After smearing the silicone grease evenly, the heat sink can be installed on the base around the CPU.

Finally, clamp the fan on both sides of the cooling tower and plug in the connector. Note that the fan blade should face the memory direction.

Finally, install the light controller. Insert the pin and power cord on the controller, and then insert the other end of the pin into the corresponding socket on the radiator.

|Effect display

Although the installation process is not difficult, it is painful to take photos while installing. When everything is ready, press the power button, and see the dazzling lights on the radiator, all the hard work is worth it.

The biggest feature of the Cool Cool Blizzard T610P radiator is the gorgeous RGB colorful light effect, especially at night.

The attached controller can adjust your favorite light effect by itself. It has three buttons, which can adjust the brightness, color and mode respectively. It can be fixed to a certain color, can also be colorful, and can control the breathing frequency. You can always find the light you most admire.

Not only the fans, but also the lights on the top cover outline the cold lines, which looks particularly cool.

On the one hand, as a radiator, Hyun is what I care about most. The small fan used to be very noisy at night because of its high speed, while the large fan of the Cool Cool Extreme Blizzard T610P radiator is only 650 rpm when it is turned on, and no sound can be heard. The world will be clean after imitating Buddha, and the temperature is only 30 degrees. After I use Master Lu to turn on the copying mode, After the fan speed is increased, it is only more than 1100 revolutions, which is still more than twice as low as before. The temperature can also be more than 60 degrees. The effect is very ideal.

|Summary

In general, I am very satisfied with the shape, light and heat dissipation effect of the Cool Cool Blizzard T610P radiator. Its huge cooling tower volume and fan size determine its excellent heat dissipation and mute effect. The powerful light control system makes it not only complete the heat dissipation task, but also take on the important task of appearance. If you want to make it emit dazzling effects, Remember to equip it with a side transparent chassis! If you have to say that it has any shortcomings, it is because of its huge size, the installation process is a little troublesome, but when you install it and start using it, the sweat in the process will disappear with the refreshing experience! Finally, I would like to thank Ainuoji and Kuleng for such a cool experience!

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)