Exquisite Metal Frame Xiaomi Mobile Phone 4 Unpacking Picture | Ainongji - 上海419贵族宝贝-上海后花园1314-上海品茶网-阿拉爱上海

On July 22, Xiaomi Company officially released Xiaomi Mobile Phone 4 at the National Convention Center. It adopts a new design and metal frame, and also inherits the tradition of fever performance of Xiaomi Mobile Phone. What is the appearance and process level of Xiaomi 4 that was highlighted in this press conference? Take a look at the unpacking picture of Xiaomi mobile phone 4 in mass production:

The packaging of Xiaomi mobile phone 4 (hereinafter referred to as "Xiaomi 4") is the same as other Xiaomi mobile phone products. It is a low-key dark yellow paper box with Xiaomi's logo ▼ on the upper right corner

There is a label with product information on the back. We got the elegant black Xiaomi 4 Unicom 3G version 16G. The SoC is MSM8274AC 2.5GHz. The matched baseband supports WCDMA, but does not support FDD-LTE. Therefore, the 4G ▼ cannot be cracked later

Open the package, you can see that Xiaomi 4 and the screen are pasted with a frosted protective film, and the above is still Xiaomi brand purpose: born for fever ▼

Although the size of Xiaomi 4's screen is the same as that of Xiaomi 3, the screen panel and touch screen technology have been improved. It appears very black when the screen is turned off, and the screen border does not show ▼

Xiaomi 4 adopts an ultra narrow frame design, which is easier to hold with one hand than other 5-inch mobile phones ▼

The earpiece adopts a groove design. The left side is a sensor, and the right side is an 8 megapixel front camera. The front camera of Xiaomi 4 uses an IMX219 sensor, with a large aperture up to F1.8. The parameters are very strong ▼

There are still three touch keys at the bottom of the screen, namely Menu, Home and Return. There is a breath light ▼ below the key

The key has a weak white backlight, and you can select Close ▼ in the menu

LED breathing light, small size ▼

The screen of Xiaomi 4 adopts IPS screen with high color saturation, and the NTSC color gamut value is up to 84%. The display effect is much better than that of Xiaomi 3 ▼

The back of Xiaomi 4 adopts grating back cover and inner membrane transfer technology, which makes the texture more outstanding than ordinary plastic materials ▼

The outer layer of the back cover is a frosted surface, and the inner layer shows a small checkered pattern. The visual effect is very special ▼

The rear camera adopts Sony IMX214 sensor, 6P lens, F1.8 large aperture, and is equipped with a led fill light ▼

The camera is slightly protruding, which can almost be ignored ▼

There are brand logo, WCDMA mobile phone and other signs below ▼

Unlike Xiaomi 3, the back cover of Xiaomi 4 has a radian, so it can be held more closely to the palm ▼

The top of Xiaomi 4 is a 3.5mm headphone connector and infrared sensor ▼

The bottom is the speaker and micro USB interface. It can be seen that there are partition bars ▼ on the top and bottom of the phone due to the metal frame

On the right side of the phone are the volume key and power key ▼

The left side of the phone is the card slot, and the whole frame is of excellent workmanship. The only thing to be picky is that the card slot and the frame are slightly uneven ▼

The card slot can be pushed out with the built-in card needle. The card slot is also made of metal. Use micro SIM card ▼

The bevel on the frame adopts the mirror process ▼

Back process ▼

The accessories of Xiaomi 4 are the same as those of Xiaomi 3. They are pin, data cable, power adapter and manual ▼

This time, the power adapter is slightly different from the past. In addition to the 5V 2A standard commonly used by Android devices, it also includes the 9V 1.2A and 12V 1A standards of Qualcomm. Among them, 9V 1.2A allows Xiaomi 4 to charge 60% in one hour ▼

For more tests on Xiaomi 4, please pay attention to our next evaluation.