Yesterday, the new brand ZUK (free guest) released its first mobile phone Z1. The machine is equipped with Snapdragon 801+3G memory+64G storage+410mAh battery, uses Type-C interface supporting USB3.0 and 2.5A charging, and supports fingerprint identification and dual card dual standby full network access.
Before the detailed evaluation, let's take a look at its unpacking pictures.
Packaging and accessories
ZUK Z1 is packed in lunch box, with serial code and production information printed on the blue waist seal in the middle.
The first layer of the package is the mobile phone, followed by the instruction box, and the bottom layer is the data cable and charger.
The small paper box includes a manual, a warranty, a game V-coin card "worth 240 yuan" and a card pick-up pin.
The charger output is 5V/2.5A.
The data cable adopts Type-C interface regardless of the positive and negative. The texture and hardness of the anti winding noodle cable are very similar to the serial port SATA cable of the computer.
Appearance and workmanship
The front and back sides of the fuselage are pasted with factory anti scratch film, and the back side is also pasted with serial code and network access permit stickers.
The ZUK Z1 is white, and the most obvious front is the square home key.
The slightly curved back cover is made of smooth plastic, which is very neat, with only the camera, flash and logo.
The camera not only does not protrude, but also is slightly lower than the back cover, so it will not rub the lens cover when placed normally.
The metal frame on the top has two antenna separation strips, and the 3.5mm headphone connector is on the right. The partition strip is closely connected with the fuselage, and the workmanship is good.
There are also two antenna separation strips at the bottom, from left to right, which are microphone, Type-C connector and speaker.
The sandblasted arc metal frame has bright chamfers on the upper and lower edges, which gives a good texture.
There is only one sim card slot on the left side of the fuselage, the height of the card holder is basically the same as the frame, and the virtual position of the card holder cover is small.
The card tray supports dual nano SIM cards, but does not support TF card expansion.
ZUK Z1 collects the light and distance sensors on the left side of the receiver, which is a rare design. On the right is an 8 megapixel camera with a unit pixel of 1.4 μ m. In addition, the black edges around the screen are wider than expected.
The home key named U-Touch supports fingerprint identification. There is also a circle of plastic between the machine screen and the metal frame. What is more special is that it is slightly lower than the screen and higher than the metal frame.
The back camera and dual flash have metal trim on the outside, and a noise reducing microphone is sandwiched between them.
The bottom of the back is the hot silver logo of ZUK.
The arc of the corners is large, and the grip feels good.
The detailed evaluation will be completed in the near future, please look forward to it.
