Remember that summer vacation when your computer host buzzed like it was working hard, disrupting your good mood all summer? It's said that the overclocking 3-U-4D Dragon Subduing CPU radiator can help you get rid of this dilemma?!

The outer packing box of the overclocking three U-4D Dragon Subduing CPU radiator is in good order, with black as the main color. The front of the Dragon Subduing CPU radiator after installation is particularly attractive to the small editor. The blue led cool aperture in that circle is very thin, and I am looking forward to the heat dissipation effect of the Dragon Subduing CPU radiator. The lower left corner is the sign of "Dragon Subduing", and the right column is the functional characteristics of the product.

On the back of the packaging box is the structural diagram of the overclocking three U-4D dragon reducing CPU radiator in English and Chinese, and the detailed introduction of parameters. You can have a first understanding of the CPU radiator. The product is compatible with the Intel and AMD platforms of two popular desktop computers in the market, and meets the cooling needs of most users.

The packing box is equipped with cooling fins, fans, instructions, warranty cards and other small parts, as well as small wrenches, heat transfer paste, etc., which are well prepared.

It is easy to confuse if there are many parts. Fortunately, the overclocking three U-4D dragon subduing CPU radiator neatly and uniformly packed the parts in transparent bags. The bags also have labels for users' reference, which is very considerate!

Two sets of fasteners have been prepared, the "one" type is for Intel platform, and the "crescent" type is for AMD platform. When installing, pay attention to the arrow direction on the fastener, and "→" should be installed in the direction of CPU.

The overclocking three U-4D dragon subduing CPU radiator is a nickel plated heat pipe heat dissipation mode. Using the overclocking three HDT process, four 6mm high-efficiency pure copper heat pipes are designed to reduce thermal resistance and maximize the heat conduction speed; The fin of the radiator adopts the over frequency three button FIN technology, which can not only increase the firmness, but also reduce the wind cutting noise and enhance the heat dissipation performance in work; The down pressing cooling air duct can protect the peripheral components of the motherboard and meet the cooling demand at the same time.

Both sides of the heat sink have a square hollow design, which is used for rear installation, convenient and stable, and convenient for screw rotation.

The fan is designed with a 12cm intelligent speed regulating bright moon aperture, and 33 monochrome LED light beads are evenly distributed at the bottom of the light guide ring, which makes the startup operation particularly dazzling and cool.

The fan blades are 9 pieces, large and powerful, which is much larger than the fan commonly used before. This fan adopts the hydrodynamic fan blade design, efficient and durable hydraulic bearings, which has outstanding mute effect when working. The rotational speed is between 1000 RPM and 1800 RPM. The official air volume data is 35CFM to 58CFM, which is still a powerful wind force.

The product has its own detailed instructions. Select INTEL or AMD fasteners according to the platform of the computer host, and there will be one set of fasteners left. The computer is configured with i7 4790/8G * 1/500G 7200/Gigabyte ga-h87-hd3 motherboard/GXII550W power supply/Minota M3 chassis. The fastener is INTEL, and the AMD side facing the backplane will face up. The shape of the half bottom screw and the hole is corresponding to it. Put on the gasket to fix the four holes.

When a small wrench is required for rear installation, the force shall be moderate.

Clean the surface of the CPU and evenly apply the thermal conductive paste on it.

When fixing the two screws, the operating space is narrow, so be careful.

Finally, install the fan on the heat dissipation main body, tighten the screws, and turn on the machine. The light of the fan is pretty good, not dazzling.

After installation, start the computer to run scores. After 15 minutes of starting the computer, the CPU temperature is displayed as 49 degrees. After playing the game for about 10 minutes, the CPU temperature is displayed as 46 degrees. The CPU temperature heats well and the game is played smoothly. The sound of cooling is negligible.

summary

Through the actual experience of these days, the cooling effect of the overclocking three U-4D dragon reducing CPU radiator is much better than that of the previous host. There are many accessories for the Tri frequency U-4D Dragon Subduing CPU radiator. The accessories are classified into transparent bags and labeled for users' reference. They are very considerate and well considered; Workmanship pays great attention to detail processing. The heat sink of Jianglong CPU is a nickel plated heat pipe heat dissipation mode, and uses the ultra frequency three HDT process to design four 6mm efficient pure copper heat pipes, which reduces thermal resistance and maximizes the heat conduction speed; The fin of the radiator adopts the over frequency three button FIN technology, which can not only increase the firmness, but also reduce the wind cutting noise and enhance the heat dissipation performance in work; The downward pressure cooling air duct can protect the peripheral components of the motherboard and meet the cooling demand at the same time; The fan has its own monochrome led aperture, which is more cool when used at night. The fan is silent when working, which will not affect the normal work. The heat dissipation effect is obvious, which has brought great help to the normal computer work.

Disadvantages:

There are many programs in the whole installation process. I hope you can also consider girls;

The fan is currently in monochrome design, which can add RGB lighting effect, and it will be better!

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)