When it comes to CPU heatsink, DIY has been exposed to a lot in the early years. CPU heatsink is an important part of the CPU when it is working. A reasonable heat dissipation design can play a significant role in the efficient operation of the computer. Of course, the appearance design and installation kit are also more important to current users, and major peripheral manufacturers have also launched many good products.

I'm lucky to get it this time Love to play computer games The platform provides an opportunity to evaluate the overclocking three U-4D dragon reducing CPU radiator. Let's take a look at the trial experience of this overclocking three U-4D dragon reducing CPU radiator product.

Overfrequency Three U-4D Dragon Subduing CPU Radiator -- Packaging Product Details The overclocking three U-4D dragon subduing CPU radiator is packaged in a long box, and the overall package is not too large. The front of the package is provided with product drawings and feature descriptions. The product structure and technical parameters are detailed on the back of the overclocking three U-4D dragon subduing CPU radiator packaging box. The overclocking three U-4D dragon reducing CPU radiator heat pipe assembly and fan are separately packaged and reassembled in an installation manner, This is an overclocking three U-4D dragon subduing CPU heat sink tube assembly, which adopts the following installation design. The heat sink installed on the CPU transfers the heat of the CPU to the upper heat sink group through four nickel plated heat pipes. The cooling block and the cooling fin group adopt the air dazzle design. Each cooling fin has a stamping bump texture. The whole cooling component and the air contact surface are larger, and the fan above can fully drive the air flow to dissipate heat.

The overclocking three U-4D dragon subduing CPU heat sink is compatible with both AMD and Intel platforms by providing two sets of installation accessories. The installation instructions contain detailed descriptions of the accessories. I saw that so many accessories are a bit messy, and they were clearly marked in the installation instructions. You can find the installation method diagram suitable for your motherboard and install it as shown in the figure. Overfrequency Three U-4D Dragon Subduing CPU Radiator -- Installation The installation of the overclocking three U-4D dragon reducing CPU heatsink adopts a backplane design, and four screws can be used to lock the heatsink and CPU for a better fit. My host uses an Intel motherboard. After selecting the installation accessories according to the installation details, you can start to replace and install them. Install the backplane shared by the two platforms on the back of the motherboard with the selected screws and plastic gaskets, and then lock it properly with a small sheet hand. Then install the heat dissipation block fixing bracket on the stud and lock it. Apply a proper amount of heat conduction paste evenly on the CPU, remove the heat dissipation block and dust sticker, and then start to install the heat dissipation components. Put the horizontal gusset plate with square hole in the middle on the heat sink, and then install it on the CPU fastener bracket with spring screws. Then install the fan on the heat dissipation component. The four mounting positions are also designed with plastic pads, which should be very helpful for the overall mute effect when working. Remember to plug the fan power cable, otherwise...

I found a problem. The space of my small board is limited. The installed cooling components are very close to the memory socket. My memory module with heat sink is not easy to install, but there is just a memory module without heat sink that can be installed in it. A little more can't be done. It is still very simple to install the overclocking three U-4D dragon killing CPU heat sink here, After selecting the right accessories for installation, there is no problem. Let's take a look at the effect of the overclocking three U-4D dragon subduing CPU radiator when it works. The LED aperture is still cool. It would be even better if you could add some RGB. The CPU temperature was only 54 degrees when it was tested by Master Lu for loading temperature and pressure during startup, which is also very low for the CPU. It can be seen that the effect of the overclocking three U-4D dragon subduing CPU radiator is good. With special attention, the fan noise is also very small, and the noise of the overall chassis is basically negligible.

Overfrequency 3-U-4D Dragon Subduing CPU Radiator -- Experience

The design of this overclocking three U-4D dragon subduing CPU radiator product is good, and the installation is easy to use. It can also be compatible with the motherboards of the two platforms at the same time. The overall heat dissipation effect is good, and the fan working noise is very low, The LED aperture is also very cool, which is very suitable for today's popular transparent chassis. My small board can also be installed, but the memory side is too close, so you can consider optimizing it later.

In general, this overclocking three U-4D dragon reducing CPU radiator product is a very recommended product for ordinary users. In terms of price, the price of the hundred yuan level product is also quite good. We look forward to the manufacturer's better performance in the future. Come on!

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)