The quality of the patch panel directly affects the safety of electricity use and service life. Most people will choose famous brands or brands they have heard of, but the price will be much higher. Have you ever thought about choosing a safe and cost-effective patch panel? This time, the author brings you a patch board that not only meets these two points, but also has practical USB charging interface function Netease USB smart patch board. Netease patch board? Yes, you are right. NetEase (126/163 mailbox) also makes intelligent hardware. What's the difference between this patch panel and the patch panel we usually use? Come and have a look with the author!

Thank you here Love to play computer games And NetEase to provide product experience.

Simple and plain outer packaging

On the front of the white outer package, there is only Netease logo. The overall appearance is very ordinary.                                

The parameters of this NetEase USB intelligent wiring board mainly pay attention to that the total USB output is 5V/4A, and the USB single port output is 5V/2.4A. This single port output is mainly used to automatically adjust the output current through the intelligent identification of the device type of the wiring board.

Specific parameters

Outer package and appearance

The wiring board is separated from the wiring inside the packaging box, so the overall design is relatively comfortable.

One internal packing wiring board and product warranty card instructions

The appearance and appearance are very high, and the materials are also very solid, which is still very important in hand.

The plug on the wiring board is engraved with NetEase logo. The plug is hard and solid, and the material is sufficient.

Compared with ordinary terminal blocks on the market, the connection between the plug and the wiring of NetEase terminal block is wrapped with a ring of flame retardant rubber to prevent the damage of the connector caused by repeated bending of the plug.

Netease patch board is 27cm long and 1.5m long, which is relatively mainstream.

The back of Netease patch board is the specific parameters of the output and input current and voltage of the product.

There are four anti-skid rubber pads at the bottom. Tear off the rubber pads at the bottom. NetEase patch panel uses the internal triangle screws.

The switch part of Netease patch board is also a more traditional design. Compared with the button switch design, the switch life should be longer. However, after using this switch for several days, I still feel that it is a bit loose, and the comfort is not very good.

The overall streamlined design appearance gives a visual beauty.

NetEase USB patch panel safety is not only about appearance materials, but also inside the patch panel, you can see the jack baffle, which prevents children from inserting other sharp objects to cause danger.

NetEase USB smart wiring board focuses on the four USB interfaces, which can output 4A current, and each can output 2.4A.

It is said that a single USB output has 2.4A, so how big is it actually to charge the mobile phone?

Current output test

First, test the influence of different data lines on USB output current

1. General output 1A mobile phone data cable, the test results are as follows:

The output voltage is 4.98V, and the current is 0.38A, which is much lower than the theoretical value.

2. The output test voltage of the 1-wire multi-purpose data line is 4.96V, and the current is 0.46A.

3. Find a relatively thick Micro USB data cable to test, and the test current is 1.05A

From the above tests, it can be seen that different data lines have a great impact on USB current output.

Compare with other similar patch panels (360 safety patch panel)

In terms of appearance, there is little difference between the two. The four corners of the 360 wiring board are designed to be symmetrically polished, while NetEase wiring board is designed to be rounded and polished at one side. The design of the two is independent of each other in switches, socket holes and USB charging ports.

It has to be said that the input and output power of both are the same, and the manufacturers are also the same. Both are products made by ORICO Technology in the Yuanchuang era. Obviously, these two types of wiring boards are of OEM design.

Both have the same length and width, no difference in size, three national standard sockets, and four USB charging interfaces

The comfort of pressing the switch is equal.

Both patch panel wires are made of the same material.

However, we can see the slight difference between the two at the connection between the line and the wiring board. The king side is slightly flat and the outer rubber ring is much thicker than the 360 wiring board.

Although there is little difference in design, material and appearance, will there be any difference in USB charging? Now let's take a real measurement. What will happen to the voltage and current of the two terminal blocks when they charge the same mobile phone.

The current and voltage stability values are as follows according to multiple test results:

It can be found from the above tests that NetEase wiring board is slightly better at charging USB interface

summary

At present, there are many kinds of patch panels in the market, and the brands are mixed. Choose a safe, well-known and affordable patch panel. As a consumer, you are more concerned. As a manufacturer, you should increase the publicity of product features to meet the psychological needs of consumers. Netease USB smart patch panel has met the psychological needs of most consumers through the above USB current and voltage tests, but the appearance and functions of the patch panel seem to need further design by the manufacturer, such as adding remote control, intelligent power-off, etc.

At present, the price of this NetEase USB smart plug board on the official website is 58RMB, and friends who need it can go to the official website to buy it.

Get free trials and professional reviews every day, and follow the Woaiqiku official account (woaiqiku)