On March 2, Beijing time, Dajiang released a new generation of consumer level aerial photography UAV - Phantom 4. In addition to the upgrade of flight performance, the new aircraft also added three black technology functions of "automatic obstacle avoidance, visual tracking and guidance flight", bringing the real visual perception technology to the consumer UAV for the first time. It will be sold on March 15, and the price is up to 8999 yuan. We have got the machine in advance. Now let's take a look at the real face of Genie 4.

packing

The first layer of packaging is a corrugated box with a disposable "anti retreading" sticker.

The package of Dajiang Genie 4 is thinner and simpler than that of the previous generation. On the front and back are the appearance drawing and logo of the machine, and on the side are some simple instructions.

The inner package is a whole foam box, The case lock can be used as a handle for unpacking.

parts

After opening, each accessory has its own separate compartment, which can be worn directly as a tool box.

In addition to Genie 4 and remote control, there are instructions, propeller bags (two sets inside, a total of eight quick disconnect propellers), power adapters, and the attached Mirco USB data cable and OTG cable. In addition, a 16GB Lexa is attached to the fuselage Of 10 speed TF card.

The output of the adapter with polished surface is the same as that of the professional version of Genie 3, which is 17.5V/5.7A (99.75W).

The power cord is divided into two ends, which are respectively used to charge the remote control and the fuselage battery.

We also got the retail version of the battery. The battery packaging is very simple, but the protection of the battery body is very good.

The battery is equipped with a switch and a "4 grid" type power indicator, with a rated capacity of 5350mAh (81.3Wh).

The battery adopts a 10 pin interface, with a stack design inside and a reserved heat dissipation hole on the side.

remote control

Dajiang has adopted the same remote control design from 20000 yuan level enlightenment to elf 3. There are anti slip teeth on the head of the rocker, and the one button landing and Power Supply Button, "short press and long press" power can be turned on/off.

There are thick anti-skid silicone on the back and side of the remote control, and there are two custom buttons on the back.

The top of the remote control is equipped with a USB interface for connecting the mobile phone/tablet, and next to it is the Mirco USB interface for debugging. The upper left corner is the function mode paddle, the video button, and the lower scroll wheel that controls the camera's up and down angles.

The upper right corner is the playback, photographing and selection wheel, and the lower right corner is the charging interface.

The stand can adapt to devices of various sizes, from mobile phones to tablets. The only limitation is the weight of the device. The holding and operating feel of the remote control is really good, otherwise it would not be used for so many generations.

fuselage

positive

back

right

left

The body is more compact than before, the lines are more concise, and the appearance has been significantly improved. There is only a silver logo on the top and a plug-in battery on the bottom.

The motor body has been slightly improved, and the propeller has also been upgraded to the quick release design of "press in+snap in", which can be screwed on or removed by pressing and rotating.

The number of screws on the back is greatly reduced, and the direction indicator light is still under the motor.

The bracket is still non detachable, but it is more streamlined and solid than Genie 3. There are two cameras on the front bracket for visual obstacle avoidance.

The left side of the fuselage is the TF card slot and the micro USB interface for debugging.

After the battery is pulled out from the back, you can see the connectors in the battery compartment and some circuit boards.

The PTZ is changed to an integrated built-in type, which is much simpler in appearance. The camera is 12 million pixels, supporting 4K video recording at 30 frames per second and 1080P slow motion video recording at 120 frames per second, with a F2.8 aperture and a 94 degree wide angle.

In the belly of the fuselage are two vision and ultrasonic positioning sensors. They are surrounded by specially designed cooling mesh.

This is the first time to open the box. There will be detailed videos and evaluations in the future. Please look forward to it.