IQOO Neo10 Pro+was released on May 20, 25: Snapdragon 8 Premium, 2K straight screen, 6800mAh battery+120W fast charge, 1/1.55 main camera, national subsidy from 2379 yuan.
I thought it would be a very ordinary small iteration, but 2379 changed everything. Scared, we rushed to work temporarily and pulled the evaluation back from the edge of pigeon dropping.
The focus of this time is to see the endurance performance of the 6800mAh battery and the performance of this Howell OV50E.
IQOO is now in the 1700 yuan, 2000 yuan and 3000 yuan file layout ↓
Appearance&Workmanship&Hand&Fingerprint Identification&External Release&Vibration
The iQOO Neo10 Pro+and iQOO Z10 Turbo Pro have eliminated the clean water shell. Congratulations. In contrast, the image flagship Ultra from the factory next door was returned to use clean water shell. The conservation law of clean water shell can be deduced: the clean water shell will only transfer, not disappear.
The iQOO Neo10 Pro+has even upgraded its pins. When the old fans saw the pins, they would burst into tears.
Like the iQOO Z10 Turbo Pro, the iQOO Neo10 Pro+has been replaced with the most environmentally friendly and valuable original C-port charger compatible with 100W PSS/PD fast charging. When a charging head goes anywhere, it means it.
In the eyes of Ben Yanzu, this is the most beautiful camera matrix of iQOO generation, and it really looks like suspended from the side.
The main problem with this matrix is that if it is too long, the position of the heat dissipation back clip will be lower.
Lower iQOO Neo10 Pro+, upper iQOO Neo10 Pro ↑
Upper iQOO Neo10 Pro+, lower iQOO Neo10 Pro ↑
(Stream saving: the same layout and design, the Neo10 Pro+with a larger screen, and the middle frame should also be slightly larger and wider)
iQOO 13、iQOO Neo10 Pro+、iQOO Neo10 Pro、iQOO Z10 Turbo Pro ↑
IQOO 13, iQOO Neo10 Pro+, iQOO Neo10 Pro ↑ (unified manual maximum brightness)
The most special color matching of iQOO Neo10 Pro+must be the new super pixel (blue and white) ↑. It and Chiguang white on our hands are both glass back cover+bright side straight edge plastic middle frame.
Jiying Black is a fiberglass back cover, which is 5g lighter. If you like to keep a low profile, actually, the lighter glass fiber version is recommended (blue/white is 163.79 × 76.60 × 8.3mm, 217g). The black version is 8.2mm thick and weighs 212g).
Although I am a noble and loyal iQOO 13 top configuration user, the iQOO Neo10 Pro+has the same screen size as the iQOO 13 after wearing the phone case, and the same touch of the phone case is too similar. I always light the screen to find that it is reversed (in fact, the middle frame of the iQOO 13 is narrower and the edge of the back cover is more curved).
IQOO Neo10 Pro+has its own big brother's E-sports chip Q2 (super score with AIGC), Huiding+Qualcomm's ultrasonic fingerprint (supporting circle entry), protection level IP65 (with wet hand unlocking), Xinsi S3910 touch IC, 23 antennas, wireless Bluetooth communication, 15 frequency 5G: n1/n3/n5/n7/n8/n18/n26/n28A/n38/n40/n41/n48/n66/n77/n78.
Other configurations include: infrared ✅ ️、 NFC ✅ X axis motor ✅ (0809), dual speakers ✅ (upper half cavity 1012+lower Raytheon speaker has N'Bass), dual frequency GPS ✅ ️、 USB 3.0 ❌、 Headphone hole ❌、 satellite communication ❌。
In the peripheral configuration of iQOO Neo10 Pro+, the main slot points are Plastic middle frame . Although there is brushed decorative texture, the bright plastic is really too fragile. It is hard to confirm what the "killer" is because it is scratched in the drawer.
2K screen, ultrasonic fingerprint, E-sports chip Q2, 120W fast charging, number of antennas All are true flagship configurations.
six 800mAh dual cell, loudspeaker external amplifier quality, 5G frequency band quantity It is at the midstream level.
IP65 and 0809 X-axis motors are off the downstream level.
Ah, by the way, the ultrasonic fingerprints of Blue Factory that support circle entry can be entered multiple times with the same finger. Users with very shallow fingerprints can try to input the same finger repeatedly to improve the recognition rate.
Objective test: screen&performance&heating
(In the screen test, the longer the brightness color bar, the better, and the shorter the color deviation color bar, the better)
iQOO Neo10 Pro+ The most unexpected configuration is the 2K screen which is close to iQOO 13 The main reason is that the AR low reflection+wear-resistant film of iQOO 13 top configuration is missing:
6.82 inch 144Hz 2K central perforated straight screen OLED (8T LTPO), BOE Q10 Everest screen material, full brightness 2592Hz high-frequency PWM dimming+single pulse DC【 Circularly polarized light processing 】。 CMF2015 standard factory color calibration. 3168x1440，510ppi。 The full white peak luminance is 1800 nits, and the local peak luminance is 4500 nits. 300Hz touch sampling rate.
The highest measured brightness is in professional mode. Generally, the highest brightness is the bright mode with the highest color temperature. The iQOO mode should have been specially processed to maximize the brightness of the most standard mode of color accuracy.
The screen obviously suppresses the common APL feature of OLED (that is, "the fewer pixels are lit, the higher the brightness of the actual lit area"), and reduces the changes in the image brightness when the display area changes.
Factory standard mode, the color temperature is relatively moderate 6775K, which is well received. This may be because after half a year of process improvement, although the same base material and specification, iQOO Neo10 Pro+ Brightness is higher than iQOO 13 , brightness uniformity is also better Is also a good comment.
Compared with iQOO 13, except that the white dots in the professional mode tend to be slightly yellow and red (it can only be perceived when two machines are emitted together), the default icon and color display of the system are still too bright (the professional mode is replaced when you get it), and the extreme brightness is not as active as the flagship, Ben is very satisfied with this screen.
CPU performance test (for each column, the longer the color bar, the stronger it is)
(The four tests on the right that are not in the white list can better reflect the daily performance output)
GPU performance test (for each column, the longer the color bar, the stronger it is)
Flash memory read/write performance
(For each column, the longer the color bar, the stronger it is. Under the same conditions, the higher the capacity of flash memory, the higher the speed will be)
We have known for a long time that iQOO Neo10 Pro+will be the ultimate version of Snapdragon 8, and there will also be 7013mm ² stainless steel VC soaking plate of the same model as iQOO 13, but we did not expect iQOO Even 9600Mbps LPDDR5X Ultra memory is directly used (It may be that SoC is packaged with memory, and the cost may be higher if a batch of low specification memory is replaced).
The actual CPU peak performance output of iQOO Neo10 Pro+exceeds that of iQOO 13 (after all, it is a later chip batch, and it is now better adjusted), and the GPU is "50% open". However, the read-write performance of flash memory is obviously low. Maybe it is a different flash memory?
Although, the current high-frequency memory and flash memory performance are difficult to be reflected in daily use.
(The left is the normal mode, and the right is the monster mode toaster ↑) There is no obvious difference between the output of the two modes.
IQOO Neo10 Pro+In 3DMark toaster, the maximum height is only 45.6 degrees, only slightly higher than iQOO Neo10 Pro (if the latter is also at the same room temperature, the actual maximum temperature will be closer).
The temperature control line is less than 46 degrees, which is very conservative in this year. The heat of the rear cover dissipates evenly, but the temperature difference between the front and the back is a little larger.
Room temperature 25.8 degrees, 200 nit screen brightness. Pay attention to the maximum temperature of the fuselage (the lower the better), the stability percentage (the higher the better), and the performance score (the higher the better)
iQOO Neo10 Pro+ The peak performance output and average power consumption are obviously low.
Under the conservative control, iQOO Neo10 Pro+broke our record in this scene with a stability of 74.4%.
We used Gunshen's GPUGFLOPS to double bake, and the result was similar to 3DMark. After 30 minutes, the maximum temperature is only 44.7 degrees.
The average power consumption of half an hour is 6.16W, which is lower than 6.28W of iQOO Neo10 Pro. Gun God: It seems that I have been underestimated.
In terms of hardware, iQOO Neo10 Pro+and iQOO 13 are more closely related. However, in terms of regulation, it is similar to the iQOO Neo10 Pro, which is a conservative temperature control line and tries to maintain a stable output.
If it is a high pressure game such as tidal ringing and stariron, it is recommended to use the heat dissipation clip. No wonder iQOO has updated the heat dissipation clip together this time ↓
IQOO magnetic heat sink back clip Pro ↑, 36W peak power, RGB light, intelligent temperature control mode (automatic power regulation, reduce condensate), Shenghui 199 yuan.
The magnetic suction heat dissipation back clip is provided with a detachable clip (on the right side), one of which has a 1/4 nut ↑.
Endurance and charging test
(Endurance test: the test environment is 25.8 degrees of room temperature, 200 nits of screen brightness, and the test power range is 30% to 80%. It includes 30 minutes of "Peace Elite" HDR HD+limit frames+anti aliasing, 30 minutes of 1080P video playback on station B, 30 minutes of short video on microblog, 30 minutes of Wi Fi and 5G surf, a total of 2.5 hours).
The iQOO Neo10 Pro+is a 25.98Wh, 6800mAh dual cell (total 7.64V), and the new Nextel+ATL cell.
In the daily 30% to 80% power range, the performance is the same as that of the 7000 mAh dual cell iQOO Z10 Turbo Pro , slightly weaker than iQOO Neo10 Pro (Tianji 9400).
If the test duration is doubled to 5 hours, iQOO Neo10 Pro+will surpass iQOO Neo10 Pro and be at the same level as iQOO 13.
on the whole, The endurance performance in the range of 30% to 80% of the electric quantity did not meet expectations. The reason is revealed in the following constant power toaster.
Use constant power baking machine ↑ (the previous model used 5W constant power, and iQOO Neo10 Pro+used 6W, so the power consumption duration cannot be directly compared).
With heat dissipation back clip+external fan for heat dissipation, to eliminate the influence of heating as far as possible. After oversaturated charging (when the machine automatically disconnects), the power went from 100% to shutdown, and iQOO Neo10 Pro+persisted for 4 hours and 5 minutes.
stay Below 35%, the iQOO Neo10 Pro+will display faster.
It is also similar to the iQOO Z10 Turbo Pro, A lot of power is hidden between 100% and 1% ——In constant power consumption, 100% of the electricity will last for 13 minutes, and 1% of the electricity will last for 7 minutes. During the baking machine, the power down speed is basically 1% in 2 minutes.
That is to say, in the 100% range, there is actually 5% to 6% of electricity. At 1% position, the actual power is about 3%. Between the top and the bottom, about 8% to 9% of the electricity is hidden.
Comparison of "power between head and tail" of some recent models and constant power toasters ↓
The new silicon carbon negative electrode batteries are easy to make large capacity, but they Life decay will be faster in the low power range , so now manufacturers will introduce functions such as "micro electricity wizard" to limit the discharge output when the battery is extremely low.
vivo、 One plus, Glory (only the constant power discharge test has been done for these machines recently). In the low power range, either the power is directly shut down or the background is cleared below 2%, or the frequency is forced to be limited by 5% (Neo10 Pro).
and The latest two iQOOs finally released the limit of 1% power range, allowing us to use constant power and photoelectric quantity (You need to manually turn off the "Micro Electric Wizard" function first).
Both Yijia and iQOO new machines have 5% to 6% power in the 100% power range. The power stored by the Glory GT Pro is very small, which explains why the endurance performance of the Glory GT Pro in the 30% to 80% power range is particularly good (corresponding to the body feel endurance in daily use)（ The less power stored in the head and tail, the more power can be actually used in the daily power range ）。
Instead, we should Calling for "Don't test till death" test ：
The battery capacity of the silicon carbon negative electrode battery model is really large, and the performance of the "measured to death" battery model will certainly be better.
However, in order to extend the service life of the battery, new models are common It will "store power" at 100% and 1%, leading to the daily use of the power range, the capacity that can be used is actually only a little more than the previous battery.
Users see record high "dead end" endurance performance, but The somatosensory endurance in the daily charge range can't keep up with the growth rate of battery capacity.
(The charging test starts at 1%. The longer the color bar in the same line is, the faster the speed is ↑. The vivo ultra fast charging mode/OPPO intelligent ultra fast charging/millet fast charging acceleration and low charge and other functions have been turned on. Some manufacturers/models turn off relevant functions by default, which needs to be manually turned on)
The iQOO Neo10 Pro+is 6800mAh dual cell+120W fast charge (20V), compatible with 100W PPS+44W UFCS, and has direct drive power supply (the official charging head is also compatible with 100W PPS/PD fast charge). The official standard is charged to 70% in 25 minutes and full in 36 minutes.
The actual charging peak power is close to 99W, the main charging range is 45 to 49W, the charging time is 25 minutes to 75%, 38 minutes to 100%, and 40 minutes to charge off.
Considering the power difference, the charging speed of the iQOO Neo10 Pro+and the iQOO three other 120W fast charging models are very similar.
Photo comparison: How does Howell OV50E perform?
The sensor size of iQOO Neo10 Pro+is the same as that of iQOO Neo10. The front camera is changed from Samsung to Gekewei, and the main camera is changed from Sony to Howei (the ultra wide angle of iQOO Neo10 Pro is JN1 with 50 million pixels):
Front Gekewei GC16B3 (16 million pixels, 1 μ m, 1/3.1 type), F2.45， Equivalent 27mm;
The main camera is Haowei OV50E VCS (1/1.55 type, 50 million pixels, 1 μ m), F1.88+OIS (4.5 level anti shake). Equivalent 23mm, physical focal length 5.56mm;
Ultra wide angle Howell OV08D10 (8 million pixels, 1.12 μ m, type 1/4), F2.2， Equivalent to 16mm.
Howell OV50E is also found in OPPO Reno14 Pro, vivo S20 standard version, Red Devil 10 Air, and Nubia Z60 Ultra/Z60 Ultra leading version's ultra wide angle.
The OV50E is definitely used most by Xiaomi/REDMI. The OV50E appeared on Xiaomi Civi 4 Pro/Civi 5 Pro, REDMI K70 Pro/K80 and other models in the name of the Light and Shadow Hunter 800.
Three iQOO models were specially found this time, Look at the difference between the 1/1.55 Howell OV50E and the 1/1.56 Sony IMX921 and the 1/1.95 LYT-600.
Because of the algorithm advantages of Blue Factory, they are the strongest in the same level, It basically represents the strongest level of OV50E, IMX921 and LYT-600.
Ultra wide angle contrast 1, global and central amplification
Ultra wide angle contrast 2, global and central amplification
Ultra wide angle contrast 3, global and central amplification
Ultra wide angle contrast 4, global and central amplification
Ultra wide angle contrast 5, global and central amplification
Focus contrast 1, global and central amplification
2x contrast 1, central amplification
High pixel mode contrast 1, global and central amplification
(In the high pixel mode, the metering bias of iQOO Neo10 Pro+is significantly different)
Main camera contrast 2, global and central amplification
Double contrast 2, global and central amplification
High pixel mode, contrast 2, global and central amplification
Main camera contrast 3, global and central amplification
Main camera contrast 4, global and central amplification
Main camera contrast 5, global and central amplification
2x contrast 5, central magnification
Main camera contrast 6, global and central amplification
2x contrast 6, central magnification
Main camera contrast 7, global and central amplification
Main camera contrast 7, global and central amplification
2x contrast 7, central magnification
The Hoewe OV08D ultra wide angle of iQOO Neo10 Pro+, even if placed in the same level of 8 million pixels, is not as good as the GC08A8 of Gekewei (the latter is unexpectedly strong).
The main photo is taken here, and there is little difference in daytime. The main reason is that the IMX921 of Fage platform has more powerful sharpening, but it is stronger than the LYT-600 of 1/1.95 model.
Weak light and double mode are stronger than IMX921. It seems that the camera of iQOO Neo10 Pro+has not been adjusted to full state.
summary
Compared with iQOO Neo10/Neo10 Pro, iQOO Neo10 Pro+and iQOO 13 are more closely related in hardware - it can be understood as iQOO 13 with weaker camera configuration/middle frame material/speaker/motor/performance control, but the price is 800 to 900 yuan cheaper.
The main weakness of iQOO Neo10 Pro+, Plastic middle frame and overly conservative temperature control line The endurance and camera calibration between 30% and 80% of the battery range have not met the expectations (the dead endurance will perform well when measured, but too much battery is hidden at 100% and 1%, affecting the performance of the daily battery range).
But iQOO Neo10 Pro+ There are super 2K screens, ultrasonic fingerprints, 120W fast charging, and the price starting from 2379 yuan after the national subsidy.
Who would have thought that the ultimate version of iQOO Neo10 Pro+2K screen+6800mAh battery+120W fast charge+ultrasonic fingerprint Snapdragon 8 was set at the national subsidy of 2379 yuan.
The price of the national subsidy when it was released was cheaper than the 1.5K screen+metal middle frame+short focus fingerprint plus Ace 5 Pro and the real self GT7 racing version (the real self has more IP69), and only 150 more than the Tianji 9400+real self GT7 (the real self is 1.5K screen+ultrasonic fingerprint+IP69) (PS: price comparison, which is meaningful only on the same platform).
As long as the metal middle frame is put down, 2379 can also have Snapdragon 8E+2K screen+6800mAh battery+120W fast charge+ultrasonic fingerprint.
The Weaknesses of Human Nature is right. The supreme version of Dragon 8 in 3199 is more and more rubbish. The baby in 2379 is all advantages.
Follow our Weibo @ Love Computer
Follow our WeChat official account: playphone
Of course, we also pay attention to our Bilibili account: love computer
