There are three models of the Redmi Note 12 Pro series released on October 27. The Redmi Note 12 Pro from 1699 yuan is a light and thin body equipped with IMX7662099 yuan and the Redmi Note 12 Pro+is a Samsung HPX with 200 million pixels, while the Redmi Note 12 Explorer from 2399 yuan is a special model with 210W fast charge. These are very It may be the strongest peripheral configuration that Tianji 1080 can get in the whole life cycle.
The Redmi Note 12 Pro from 1699 yuan should be the mobile model of our department, and the Redmi Note 12 Pro+we evaluated this time is "the first 200 million pixel mobile phone for young people".
Redmi Note 12 Pro+is 8.98mm thick and weighs 208.4g. Tianji 1080+5000mAh battery+120W fast charge. 6.67 "120Hz 1080P+flexible OLED straight screen, CStar/Tianma/Vicino drill array, 1920Hz PWM dimming. First launch of 200 million pixel Samsung HPX+F1.65+OIS, 800W ultra wide angle+200W macro. 8+256 version starts at 2099 yuan, and 12+256 version starts at 2299 yuan.
Appearance and accessories
Redmi Note 12 Pro+continues the good tradition that the original case of Note 11T Pro comes with USB dust plugs.
Xiaomi/Redmi finally replaced the 120W fast charging head (MDY-12-ED) that had been used for two years, but it was a pity that the A port was still the 6A wire of orange tongue piece. Take care of this line, they can only be full of blood together.
The 120W official charging head of Note 12 Pro+is MDY-14-ED, and the marked output specification has not changed, with a maximum of 20V 6A 120W. Considering that its service life is likely to exceed that of its predecessors, we need to give it more features.
Redmi Note 12 Pro+, a new gallium nitride fast charging head, has a small size, and its weight has dropped from 182.4g to 155.4g, which is a good civilization.
It supports Xiaomi's private protocol (i.e. PPS column) and QC3.0, and the 65W PD of 20V/3.25A. It is an environmentally friendly charging head.
The Redmi Note 12 Pro+on our hands is a mirror porcelain white color, and there are also time blue and midnight black options.
Mirror porcelain white is smooth glass, stained with fingerprints, but it is not obvious if the white is stained with fingerprints. The main problem is that it is really slippery. If you run naked and put it on the table, you should prevent it from sliding like a piece of soap, and pay attention to safety.
Redmi Note 12 Pro+continues Note The appearance design of 11T Pro series is more harmonious and handsome than that of Note 11T Pro series: it is upgraded to plastic middle frame+glass back cover, mainly because the camera matrix is larger, and small details such as flash and annotation are changed.
Redmi K50 Premium, K50, Note 12 Pro+, Note 11T Pro+↑
After using a large area of soaking plate and a large bottom, all living beings are equal, and even the 1000 yuan machine is overweight. Redmi Note 12 Pro+is 8.98mm+208.4g, and the striking characteristics of the hand feel are thickness and weight. The radian of the back cover is comfortable, while the straight side middle frame slightly shows hands.
The recognition speed of side fingerprint is slower than that of K40 generation. Fingerprint entry requires more than 20 times of pressing. High EQ means higher theoretical security.
1012+1216 dual speakers, with obvious difference between the upper and lower volume. The volume is OK, with rear cover resonance, and the overall sound quality is satisfactory.
The force of 0809 X-axis linear motor is OK, but the springback is slightly delayed.
Screen: domestic high-frequency PWM dimming OLED
Redmi K50 Premium, K50, Note 12 Pro+, Note 11T Pro+↑
The thickness of the bottom frame of Redmi Note 12 Pro+is the same as that of its elder brother K50/K50 Pro and K50 Premium (11T Pro+is LCD, and the chin will be significantly thicker, But LCD will never be a slave! ）
The Redmi Note 12 Pro series is equipped with a domestic 6.67 inch 120Hz central perforated flexible straight screen, 2400x1080, peak 900 nits, 240Hz touch sampling rate, 1920Hz PWM dimming, and 10bit color depth. On the contrary, the standard version is Samsung OLED, which can be regarded as a declaration of sovereignty to domestic screen manufacturers.
This time, the whole system is mixed supply of Huaxing Pearl/Tianma Windmill/Vicino tripod array (all are similar to drill array). The screen code on our hand is 42, which is the screen of CSOT (if it is found that 36 is Tianma, 41 is Vicino)
The actual screen micrograph and log mutually confirm that it is indeed an oval green sub-pixel and a star blue red sub-pixel familiar to Huaxing.
No special mode is required. The default is the 240Hz touch sampling rate. Here we have to call the Blue Factory to learn.
When about 55% brightness is switched to 1920Hz high-frequency PWM dimming, the system does not need to do anti flicker mode.
Manual full white 489 nits. At this time, the four corner brightness is 512/501/511/499 nits. The evenness performance is within the normal range and in good order.
The screen brightness of Redmi Note 12 Pro+is higher than that of the "1.5K screen" K50 Premium, which is between Samsung E4 and E5 screens.
The grayscale performance is also very good, and The color accuracy has been able to match the K50/K50 Pro of Samsung 2K E4 screen 。
Even "send you" 1920Hz high-frequency PWM dimming, comfortable! There is nothing to say, domestic screen is awesome!
Performance and heat: first launch Tianji 1080
Tianji 1080 is the overclocking version of Tianji 920. TSMC has a 6nm process, 2x2.6GHz A78+6x2.0GHz (the big core is 0.1GHz higher than Tianji 920). The GPU is still Mali-G68 MC4. In the app, Tianji 1080 is still recognized as MT6877 (the code of Tianji 900/920 series).
The performance of Redmi Note 12 Pro+, a Tianji 1080, is slightly better than that of Tianji 920, between 765G/768G and 778G of Snapdragon. Because it is UFS 2.2, the flash memory reading and writing speed is different from the Snapdragon 778G.
Seeing that Qualcomm and MediaTek have such a tacit understanding on performance control, it is also Surprise's mother who opened the door for Surprise, and Surprise got home.
Because MIUI has been improved, the installation and application speed of Redmi Note 12 Pro+is very fast. With Tianji 1080 and UFS 2.2, the installation speed can exceed that of Tianji 9000+of BlueWorks. As long as it is not "3A masterpiece" like Taobao, the daily fluency of Tianji 1080 is OK, that is, after loading speed and opening several more apps, there is a clear gap between Tianji 1080 and the higher end SoC.
Tianji 1080 can also meet the basic fluency requirements of Peace Elite HDR+limited frames+anti aliasing. Room temperature 25.5 ℃, 200 nit brightness, 20 minutes later, The maximum temperature is 39.8 degrees, body temperature is felt, and the heating control is good.
Because the performance output is not high, the heat dissipation pressure is very low. But Redmi Note 12 Pro+is equipped with 3000mm ² VC soaking plate, whole machine 30000mm ² Heat dissipation, this specification can already meet some Huolong SoCs. Tianji 1080: Are you worried about me?
This specification is more likely to be used to cope with the 210W super fast charge of Note 12 Exploration Edition. Redmi Note 12 Pro+just "scraped" the light of Big Brother. But to be honest, I hope it can use the Note 12 Pro to dissipate heat. There is a 187g+5000mAh battery, which is more than 20g lighter
Endurance and charging
Redmi Note 12 Pro+is Tianji 1080+5000mAh battery+120W fast charge.
After 30 minutes of "Peace Elite" (HDR high-definition+limit frames+anti aliasing), 30 minutes of 1080P video playback at station B, 30 minutes of short video on microblog, 30 minutes of Wi Fi and 5G surfing respectively, and a total of 2.5 hours of endurance test, the remaining power is 73%. The endurance performance is close to that of a group of flagship dragons 8 Gen 1, which belongs to the middle level.
The actual charging peak value is 99.3W, lasting for 2.5 minutes. Second gear for 11 minutes, 80W to 57W. After 14 minutes, it is 57W and 45W.
When 100% power is displayed, the power is still 45W. It takes 3 minutes to slow down to 18W and cut off the charge. The curve is different from that of previous mobile phones. The middle part will adjust the output intensively.
It takes 20 minutes to fully charge, which is close to the Redmi K50 Premium. It is a typical 5000mAh battery+120W fast charge.
Photo: 200 megapixel HPX+film filter
Redmi Note 12 Pro+spends most of its cost on a 200 million pixel main camera. Overall specifications:
Front is 1600W, OV16A1, 1 μ m. 1/3.06 ", F2.45 (same as Redmi Note 11T Pro series)
Samsung HPX with main camera of 200 million pixels, 0.56 μ m. 1/1.4 inch. 16 in 1 into 2.24 μ M 1250W, 4 in 1 into 1.12 μ M 5000W, F1.65 large aperture+OIS optical anti shake, 7P lens, 6.14mm focal length
Ultra wide angle 800W, S5K4H7, 1.12 μ m，1/4''，F2.2。 In addition, there is 200W tactical macro range.
The shutter response and imaging speed of Redmi Note 12 Pro+are close to those of a normal 12 megapixel mobile phone, and it can't be seen that this is Tianji 1080 with 200 million pixels. The imaging speed between 50 million pixels and 200 million pixels is close, even faster than that of normal models!
However, after all, when the CMOS throughput is placed there, when it is held horizontally, it will be found that the jelly phenomenon is more serious than that of ordinary models.
In addition to 200 million pixels, Redmi Note 12 Pro+also promotes film style filters, claiming to use ISP and AI computing power to adjust each pixel.
Redmi Note 12 Pro+provides eight choices, including "motion picture film V-250, HP black and white film H-400, daylight film KP-160, classic color negative film FC-400, legendary film KC64", and the proof will be added with graininess and dark angle that imitate the film, and the effect is as follows ↓
Shoot the chameleon with the same bright color, and the effects of 8 kinds of filters are as follows ↓
Redmi Note 12 Pro+also follows in the footsteps of its brother Xiaomi 12S series and makes its own exclusive picture frame watermark ↓
The photo frame is like the RGB light on the computer, which can improve the performance by 300% It would be better if we could have a Leica logo.
Main photo sample sheet 1
Main photo sample sheet 2
Main photo sample sheet 3
Main photo sample sheet 4
Main photo sample sheet 5
50 million pixels in ultra clear mode and professional mode (professional mode is only 5000W, not 200 million pixels), compared with the central magnification. Emmmm, there is no essential difference.
12.5 megapixel, 50 megapixel and 200 megapixel proofs, scene size comparison at 100% zoom ↑
The pixels of the three samples are in the quantitative relationship of "1:4:16", and the resolution of the 200 million pixel samples has reached an exaggerated 16320x12240.
Taking the above scene as an example, the 12.5 megapixel sample is 3.1MB, the 50 megapixel model is 9.7MB, and the 200 megapixel model is 28MB.
If the 1250W sample is 4.3MB, the 5000W sample will increase to 16.6MB, and the 200 million pixel sample will increase to 44MB.
12.5 megapixel, 50 megapixel and 200 megapixel proofs, central magnification and contrast ↑
Scene 212.5 megapixel, 50 megapixel sample central magnification comparison
High pixel mode also has multi frame synthesis, and the film forming speed is fast.
The details of the 50 megapixel mode are obviously improved. Direct cutting can exceed the 2x digital zoom of many mobile phones, even the ordinary 2x telephoto lens.
The improvement of 200 million pixel mode is far less than 1250W to 5000W. 50 million pixels can be opened daily, the effect is close and space is saved.
Press the shutter continuously to compare the samples. The left is the normal sample, and the right is the "sandwiched" sample ↑
It may be limited by the ISP performance of Tianji 1080. In continuous shooting, Redmi Note 12 Pro+is more likely to be "sandwiched" than normal models (because there is no time to process some samples). It can be clearly observed that the strength of sharpening algorithm and the difference in image darkness.
Photo summary
We'll have it early next week Redmi Note 11T Pro+ (GW1 of 6400W) 、K50 Pro (100 million pixels HM2) Redmi Note 12 Pro+and iQOO 10 Pro (as the representative of flagship IMX766) Photo comparison of , so here is a brief introduction to the camera of Redmi Note 12 Pro+.
Its 50 million pixel mode has delivered a satisfactory effect, which is far better than the previous 100 million pixel CMOS high pixel mode. For 200 million pixels, one is 0.56 μ The unit pixel size of m is smaller than the wavelength of red light (622-760nm, i.e. 0.62 μ M to 0.76 μ m) Second, it is too difficult to guess the color of 16 in 1, resulting in little improvement compared with the 50 million pixel mode.
In addition to the obvious horizontal jelly in the horizontal grip, the photo taking experience is no different from that of an ordinary 4800W/5000W pixel mobile phone. Redmi Note 12 Pro+may be the most active Redmi mobile phone for multi frame synthesis in history, but it may not be one of them. Coupled with 1/1.4 inch CMOS outsole, it does Have the initiative to fight with some flagship ships.
summary
The most prominent points of Redmi Note 12 Pro+are three: high-frequency PWM+screen with good color accuracy and brightness, 120W fast charge, and 1/1.4 inch 200 million pixel sensor that is unmatched in the same level. The performance is placed in the fourth priority instead. Tianji 1080 is the overclocking version of Tianji 900/920. Its performance is only slightly better than that of the mid end Snapdragon 765G/768G two years ago.
The Redmi Note series is now the "first generation performance, first generation photography". The Note 11T Pro series with Tianji 8100 was the main performance, while the Redmi Note 12 Pro+is responsible for photography. In the Note 11T Pro series, the "knife method" of the ultimate cost performance ratio is all for performance concessions; In the Note 12 Pro series, everything is a concession for the camera.
This special product concept not only makes Redmi Note 12 Pro+a typical camera specific model, but also the only camera specific model in the mid market. It is estimated that Redmi also knows that the main performance of the Note 11T Pro series is responsible for traffic volume. Redmi Note 12 Pro+ It is a love letter left by Redmi to those users who like taking photos but have limited budgets.
Although ordinary people ask me about mobile phone recommendations in this price range, I will still answer the Note 11T Pro (LCD is never slave!) or K50, but I will respect this camera specific model: if you don't care about taking pictures, it is a partial student in the camera direction. If you like to take photos, Redmi Note 12 Pro+is the only photography expert in this price segment.
Follow our Weibo @ Love Computer
Follow our WeChat official account: playphone
Of course, we also pay attention to our Bilibili account: love computer
