On May 26, it was reported that OPPO had recently started to warm up the Reno 4 series and released the poster of the model. Yesterday, two new OPPO machines just appeared on the mobile information network of the Ministry of Industry and Information Technology. From the appearance of the camera module, they can be judged as Reno 4 and Reno 4 Pro.

The model "PDNM00" adopts a single perforated curved screen design. It should be a Reno 4 Pro with a higher level of positioning. It still maintains a thin and light design. The overall circumference of the whole machine is 159.6 × 72.5 × 7.6mm, weighs 172g, and is equipped with a 6.5 inch 1080P resolution AMOLED screen; The main frequency of the processor is 2.4GHz, which should be Snapdragon 765G according to the existing disclosure, and supports three 5G bands: n41, n78, and n79; Rear 48 million+12 million+13 million pixel three shot; In addition, the battery capacity in the model parameters is 1955mAh, which should be the double cell scheme of 65W flash charge, equivalent to 3910mAh.

The Reno 4, with the model of "PDPM00", adopts a dual perforated straight screen design. The overall circumference of the whole machine is 159.3 × 74.0 × 7.8mm, and the weight is 183g. It is equipped with a 6.4 inch 1080P AMOLED screen. The chip is the same as the 2.4GHz Snapdragon 765G. The 5G supports the n41, n78, and n79 frequency bands, and the rear set is 48 million+8 million+2 million pixel triple camera; The display battery capacity is 1965mAh, which should also support 65W flash charge, and the equivalent dual cell is 3930mAh.

At present, in addition to the upgrade of the fast charging scheme, the overall configuration of the Reno 4 series is not much better than that of the Reno 3 series.

Follow our Weibo @ Love Computer

Follow our WeChat official account: playphone

Of course, we also pay attention to our Bilibili account: love computer