Schneider, as the leader of the industrial electrical products industry, its products are mostly used in the industrial field, and the most famous one is the switch. It is unexpected that Schneider has started to produce household plugs recently, but it is reasonable. After all, plugs are also electrical products. However, in the era of all kinds of connectors flying everywhere, some provide USB ports, some provide intelligent control, and some focus on high integration. What are the characteristics of Schneider's connectors? Next, let's experience together. Thank you here@ And@ 。

The outer package of the insert row is relatively simple, with the product features marked on the front, 10A overload protection, 5 ° humanized bevel design, and child safety protection door. The product is Angular Zhiyi series, which can be used for home and office, and has a 3-position socket.

Schneider Electric's logo and product slogan "Life Is On" are on the front and bottom.

The back of the package is marked with detailed information, the external structure diagram of the switch, model parameters and precautions. In addition, it is marked on the package that the row plug is a new national standard of 3 digits, and the line is 1.8 meters long. The color is lower black+upper pearlescent silver. All materials are recyclable and environmentally friendly.

The executive standard is GB 2099.7, the new national standard. The shell is made of high flame retardant PC material, with 10A overload protection.

The Chinese official website address of Schneider Electric is marked on the top of the package: schneider-electric.com/cn 。

Open the packing box and take out and insert from the top.

The overall workmanship of the platoon is very good. Both printing, button, hole and edge are smooth.

The metal insert part of the plug is wrapped with a protective shell, and the adjacent pieces of the insert are marked with the attribute of the signal, L、N、GND。

The metal insert is very thick, which can generate excessive current and has strong hardness to prevent deformation during pressing.

The three wires of 1 square meter used in the cable part meet the new national standard.

The lead part of the row plug is protected by a thick protective sleeve, and the overcurrent protection reset button is beside it.

The buttons of the row plug on/off buttons adopt square chamfer design, with switch icons on them. There is a power indicator next to the button.

The maximum power of row plug is 2500W. The jack is designed with two five holes in the new national standard, and each hole has a child safety door to prevent children from accidentally touching.

The most important two points of row insertion are the humanized 5 ° slope design. In this way, there will be a natural slope after other plugs are plugged in, so as to prevent the cables from being pulled and flipped.

The row plug housing is divided into upper and lower parts. The lower part is the main housing, with black frosted design. The upper part is pearly silver, and the gap between the two parts is relatively small, which proves that the mold is still fine.

The back of the row plug is fixed with five screws, and then the nameplate is integrated with the shell.

Important parameters of the product are marked on the nameplate: 250V~50/60Hz; Maximum current limiting 1A; The maximum power is 2500W.

In addition to the nameplate, the product model is also printed by laser: NSW1030_SB。

Both the iPad plug and the air conditioner plug can fit well.

The power indicator lamp plugged in after power on is on, and the indicator lamp is a white LED lamp.

The fixed screws for row insertion adopt a triangular design, which is somewhat different from the "one" and "ten" characters of ordinary household screws, and plays a certain role in preventing disassembly.

I have a complete set of tools at hand. I happen to have this triangular screwdriver, so I can just take it apart.

Five screws found.

The shell of the row plug is still firmly fixed. It took a lot of effort to remove it. The buckle inside is very firm and can withstand relatively strong stress.

The material used for the shell is very thick.

The inner connecting copper bar of the row plug is cut and molded with 1mm thick brass copper plate. The material used is very conscientious, which ensures that 10A/2500W power will not generate serious heat.

The solder joint between copper bar and cable is very full. In addition, the materials for the switch and reset parts are also good.

To sum up, the platoon plug produced by Schneider is very reliable from the perspective of brand. Through disassembly, we can know that its materials are really honest, and the price is only 39 yuan, which is really high in cost performance. But except for the design of a 50 degree natural slope, there are few other innovations. Fortunately, the materials are thick, and it is also worth recommending for general household or corporate use. At the same time, we also hope that Schneider will exit more plug-in products with more functions, such as those with USB charging function and those that can be controlled remotely. It can enable consumers to have more choices.

For free trial and professional review information, you can follow the Woaiqiku official account (woaiqiku)