Looking back, it has been several years since I played with UAVs. From the earliest assembly of UAVs to the current consumer level UAVs, my love for UAVs has not decreased at all. Even a UAV should be installed in the trunk every time you travel to record the beautiful scenery. Remember when I first touched the drone DJI This brand is not as popular as it is now, because all fields are not like spending a lot of money when they first entered the pit. At that time, it was bleeding to spend about 1000 yuan. I bought a bunch of parts and pieced together a few days and nights to make a simple UAV that was trembling after takeoff. Besides, the UAV has no function. At most, it is equipped with a GPS The hovering or headless mode of flight, such as aerial photography, fixed point return, obstacle avoidance, etc., were unimaginable at that time. Think about that time. Compared with the present, it was like a stage when a child could just walk.
There was also a period of time of playing with the electric helicopter, but in terms of the simplicity of operation, the electric helicopter and the multi rotor UAV could not be compared at all. The requirements for the take-off place and control proficiency of the electric helicopter were too high, and it started to eat ash in the box after several flights. So far, it has not been opened to fly again, but only made a static demonstration.
Later, as time went by, DJI The brand is popular, and one of the more revolutionary products is Phantom 4 It was the first UAV to put forward intelligent flight mode and barrier flight. It can be said that there was a boom at that time. It was also the product that made DJI It has become the strongest UAV brand on the surface. As a result, I finally owned this relatively representative UAV. Since flying over the consumer UAV, all assembled UAVs have been sealed up, because in terms of convenience, functionality and stability, the assembled UAV is incomparable with the consumer UAV.
The best UAVs will be replaced by new products with the development of times and technology, so the portability of UAVs has gradually been valued by manufacturers, and a variety of foldable portable UAVs have emerged. It's also because every time I go out with Phantom 4 We should carry its representative silver protective case.
So I also want to start a more portable foldable UAV. Later, we started a universal foldable UAV BYRD Advanced1.0 . Since we have this UAV, it is the main machine for traveling far away. It can be hung GoproHero4 You can also hang your own PTZ 4K The portability and flexibility of PTZ are much better.
Later, we started a smaller folding UAV cornerstone that can be controlled only by mobile phones KIMON It can be used for travel selfie. It is very small, and it is only larger than a fist when folded. It is not as big as a SLR when put in a bag.
Then time goes by two thousand and sixteen Year, DJI And finally launched their folding UAV MAVIC PRO On the day of its release, I instantly felt that these folding UAVs in my hands lost their luster. As a DJI 's fans, don't be too excited about it. They thought that they would come to the store at the first time once it was launched, but it backfired. I don't know whether it was insufficient production capacity or hungry marketing. No matter online or offline stores, they didn't have any stock. If you want to have stock, you should add two thousand Even higher prices can be obtained, and the official website reservation has been scheduled for several months. I am a person who hates this kind of price increase marketing, so I have to bear with my heart's desire to start this thing. As time goes by, my desire has become less strong. A chance to go shopping, passing by DJI The store asked casually and found that there were goods in stock, so they took it home and bought a suitcase that looked full.
Let's take a look at this box first. It has a completely black appearance, and the lines are very strong. Just a simple one in the middle LOGO That's enough.
The buckle of the box is very firm, opening and closing are smooth, and the force is not small at the moment of breaking, with a click.
The shopkeeper said that this box was a new one. The mold opening in the old box was not so fine. It was the kind of mold that was cut directly. The new mold opening was formed once, not cut later. The edges and corners were accurate and smooth. In addition to the car charger thrown in the glove box, all other accessories of an all-around suit are put in without pressure.
The folded size of the UAV is about the same as that of a bottle of iced black tea in a bottle, and its portability is better than that of previous UAVs. Two gold decorations, one thick and one thin, are printed on the arm MAVIC PRO Logo of.
The bottom of the UAV is a metal shell, and the whole shell is designed as a heat sink mode.
Remove the rubber pad outside the PTZ protective cover, we can see MAVIC PRO The cloud head of. Compared with other UAVs, MAVIC PRO This three-axis PTZ is exquisite. On the premise of ensuring the picture quality, the design should be as small as possible, so that it is easier to store. Lens support 4K Video shooting is enough for ordinary aerial photography enthusiasts, but if you want to pursue better picture quality, you can buy P4P , mechanical shutter plus one Inch COMS 。
The protective cover of the head should be removed during flight. Otherwise, there will be glare effect, which will affect the image quality. However, the head is very fragile after the protective cover is removed. After all, it is a relatively precise part. It is always OK to be careful when using it.
The maximum distance between the folding remote control and the fuselage for signal transmission is officially given as 7km What is this concept? A building thirty The height of the floor is not more than 100 meters, 500m The line of sight of the distance drone is invisible. Let's fill in the picture of this distance. Such a long flight distance gives people confidence when flying in a short distance.
The two spare batteries of the all-around kit plus a charging steward. The charging steward does not charge all batteries at the same time, but charges each battery inserted on it in turn, not as fast as expected.
Let's talk about it in more detail MAVIC PRO At the bottom of the plane, there are many components integrated in this bottom, including its camera for accurately recording the takeoff point, front and back. When using the camera to accurately record the takeoff point, the plane does not rise to 1.5m But hover at a higher height, so don't use it easily indoors, it will reach the roof. Redundant dual ultrasonic height fixing elements can make the UAV hover like a sea fixing needle GPS It is more accurate.
The foldable blades do not need to be deliberately unfolded before takeoff. The UAV motor rotates to open the blades, which is easy to use. And it comes with three For standby propeller. The oars are divided into front and back, and the motor and blade marks shall be installed correspondingly.
The UAV blade unfolds and waits for takeoff at any time.
Tailstock DJI LOGO 。
Model mark of the boom.
Details of motor and blades.
On the positive side, MAVIC PRO It is not a flat design, but a slightly raised design in the middle. In this way, it looks like Hercules transport aircraft.
The box, remote control and UAV are put together harmoniously. The style is my favorite type, and I never get tired of watching them.
The battery shall be charged to 100% Battery is available by default only when the system is powered on DJI GO4.0 , upgrade the UAV firmware and remote controller firmware thirty About minutes, be patient. You can fly when everything is ready for upgrade.
Okay, this time MAVIC PRO Let's go here first for the unpacking and drying part of MAVIC PRO Use experience and play methods, etc.
