preface
In people's work, life and entertainment, computers are indispensable nowadays. Compared with bulky desktops, laptops have the advantage of being small and portable. However, the laptop has no fewer parts than the desktop computer. It is just that the parts are smaller or stacked in a narrow space, so the requirements for heat dissipation are particularly high. Especially in hot summer, if the heat dissipation is not good, it is easy to cause problems such as a stuck machine. Today, we come to see an all aluminum laptop cooling pad produced by ORECO that can fix the fan position by itself. Thank you Love to play computer games Provide trial products for this period.
Unpacking
The outer package of ORICO notebook heat dissipation pad adopts color printed corrugated box. The front white background is printed with a rendering of silver heat dissipation pad. The brand logo and product name in the upper left corner are all printed in English, which is quite international and slightly tall.
On the back is the product specifications printed in many languages (the enlarged text in the upper right corner of the figure below), factory address, barcode and other information. Here, I would like to denounce the violent sorting and transportation of the express company. When the package was received, the box broke a crack. Fortunately, the product was not affected. I also hope that ORICO's packing box can be strengthened or another transport box can be added when it is sent through online channels.
Open the box, and the heat dissipation pad is installed inside with a dust-proof film. The fan is not pre installed, but is placed in the lower box. In addition, there are after-sales contact cards and certificates of conformity.
appearance
ORICO heat dissipation pad is made of all aluminum and has an integrated metal forming process. There is no disassembly or welding trace. There are many round holes on the surface of the heat dissipation pad. It is also used to fix the fan while dissipating heat. The two cooling fans need to be DIY installed by themselves, which can meet the needs of different locations of cooling grids for different notebooks.
The bracket is designed with a 12 degree tilt angle, because it is integrally formed, and this angle cannot be adjusted by itself.
Compare the position of the cooling hole under the notebook, then press the spring on the cooling fan tightly, insert the column foot on the fan into the mesh, and then release it. This operation can be done by one hand without using other tools, which is very convenient.
There are rubber pads at the two support feet of the bracket and the four corners of the panel, which are used to prevent skidding and scratch the computer and desktop. But this rubber pad is somehow particularly susceptible to dust.
user's experience
The anti slip effect on the support panel is very good, as shown in the figure below, the notebook will not slide down only when the upper two feet are placed on the anti slip pad (please automatically ignore the poor people's use of this slag book). But I personally feel that the inclination angle of 12 degrees seems a little big.
The USB interface of the fan connected to the power supply adopts the design of "borrowing one for one". If there are few USB interfaces on the notebook, there is no need to worry about not using enough, but the external socket provided is too tight, so it is hard to plug in and out.
The cooling fan rotates at about 2000 revolutions per minute with a maximum wind force of 17.4 cubic feet per minute. These parameters seem a little unclear, so we'd better do something interesting. Paste a small note on it to see the "Yingzi" dancing with the wind after power on.
The parameters indicate that the noise of the cooling fan during operation is 21 decibels. Let's also measure it. In order to avoid noise interference when the notebook is running, we use a charging treasure to power it for testing. The indoor noise reading is 42dB when the fan is stationary, and 61~63dB when the fan is working, with a difference of 19~21dB, which is basically consistent with the label. As far as the actual feeling of the ear is concerned, it is also within the acceptable range.
Let's see how the cooling effect is. We used Master Lu to monitor the temperature. First, we put the laptop directly on the table to play online video for half an hour without heat pad. After that, the temperature of CPU, CPU core and motherboard reached 49 degrees, and the hard disk reached 32 degrees. Then use ORICO to cool the laptop. After the video continues to play for 15 minutes, the CPU and CPU core temperatures are 44 degrees (down 5 degrees), and the motherboard is 40 degrees (down 9 degrees). But the hard disk temperature is still 32 degrees unchanged, which is not high.
Obviously, this cooling pad is very effective. Now, Hebei Province where the author is is still in spring, and the temperature is not high. I believe its effect will be more obvious after summer.
Suggestions and summary
It is suggested to change the tilt angle of the bracket to a self adjustable design to meet the usage angle habits of different users.
It is recommended to add a winding storage slot for the power supply line of the cooling fan to facilitate storage when not in use.
It is suggested that the legs of the heat dissipation pad should be folded so that they can be carried in the computer bag.
A blue LED light can be added on the fan, and a switch button that can turn off the light is set at the USB connector.
As a leading manufacturer of computer peripheral products in the industry, ORICO launched this all aluminum DIY double fan cooling pad with extremely simple appearance design and excellent workmanship. Summer is coming soon. Don't let your notebook suffer from the heat on a hot day. Prepare a cool "bed" for it and serve you happily.
Get free trials and professional reviews every day, and follow the Woaiqiku official account (woaiqiku)
The article on the trial of iGo is completed by netizens, which does not represent the views of this website.
