I think most of them are familiar with mobile hard disks. In order to copy more blockbusters and resources, many people will choose a mobile hard disk for storage. More often, we focus on the read/write speed of the mobile hard disk, whether it is high-speed transmission. Of course, the read/write speed of the mobile hard disk is determined by the hard disk box interface and the hard disk type. The choice of hard disk and box is very important. Today, I will introduce an alternative plug and play mobile hard disk box - ORICO external mobile hard disk holder.

1、 Unpacking

The ORICO external mobile hard disk holder is packed in yellow kraft paper. Although the full English front design can experience the international style of the product, it is better for the domestic market to compare Chinese and English, which is clear from the appearance. Through the front introduction, the base is: ORICO desktop external USB3.0, 2.5/3.5-inch notebook universal serial port hard disk base

The design of the back is quite up to standard, in line with Chinese reading habits, mainly introducing the ORICO brand information. You can learn more about the products and manufacturers through the official website.

What does it mean to just look at the external light? It's better to go directly to the product. The overall weight of ORICO mobile hard disk is very light, and the classic black design and white font all show the high-end. The actual shape of the product is shown in the figure below.

The front of the product is the ORICO product logo. I don't know why I always feel that the base is obedient and a little big.

The other side of the product is the main interface. From left to right, there are power interface, data cable interface, ORICO base switch. The overall is not very complex, very simple.

Below the rectangular groove on the front of ORICO is a hard disk slot. It can be seen from the slot that this device only supports serial hard disks, which is not applicable to older parallel hard disks.

One of the more exciting features of ORICO hard disk base is that it supports 2.5/3.5-inch serial hard disk at the same time, regardless of the size of desktop or notebook hard disk. The hard disk can be well fixed through the bottom movable cover. The cover plate is not fixed well during use. The gap between the left and right is large, and the mobile hard disk base has a clear sense of shaking. It is recommended to use a compact soft material model to tighten the design, which can better stabilize the hard disk.

There is a family photo of ORICO hard disk base. In the same words, the product is very easy to get started. It is free of pressure for anyone to use and operate, and plug and play.

It happened that there was a notebook hard disk in the small editor's home that could be used for testing. The hard disk was inserted stiffly. I don't know whether the vibration caused by inserting the hard disk in this way will damage the hard disk. Maybe it needs professional expertise, ha ha. However, I still recommend that the bottom of the groove also use soft material as the buffer zone after the hard disk is inserted to effectively protect the hard disk.

The appearance of half day was introduced. It's better to power on and see how the ORICO hard disk base performs. The power adapter of the ORICO hard disk base appears to be designed and low, which greatly puts pressure on the general patch board. After the power is turned on, turn on the ORICO base switch. If the indicator light on the base is blue, it means the base is powered on normally and can be used.

There are some concerns about the vertical placement of the hard disk. This design will damage the disk of the hard disk if it runs for a long time. The details need to be tested.

2、 Use effect

Before using ORICO hard disk base to copy data, the editor first tested with USB2.0 mobile hard disk. The test is as follows: use 157M video file to test, copy from the local hard disk to the U disk, and the copy speed is displayed as 7.7MB/s.

The ORICO hard disk base is also used for testing with a 157M video file, which is copied from the local hard disk to the same hard disk, and the copy speed is displayed as 11.9MB/s. Of course, the USB2.0 interface and the 3.0 interface themselves are not comparable. Because of equipment factors, they can only be tested in this way temporarily.

After copying in, let's take a look at the copy out test and copy it from the mobile hard disk to the computer. The speed of mobile hard disk with USB2.0 interface is as follows: 17.8MB/s (of course, the same video file test above)

Now I'm going to take a look at the copy test of ORICO mobile hard disk base, which is copied from the mobile hard disk to the computer. The speed of ORICO mobile hard disk box is as follows: 35.6MB/s (of course, the same video file test above).

3、 Feelings and suggestions

The external USB 3.0 hard disk holder of ORICO desktop computer is very convenient in use. It is really plug and play, which eliminates the trouble of repeatedly disassembling the mobile hard disk box. It is convenient and fast for large and small hard disks. The actual copy speed is acceptable, and the speed is very satisfactory. Compared with the price of other mobile hard disk boxes, the price is almost the same. For those who like convenience, it is worth recommending and buying.

Suggestion:

1. Whether the base slot can be designed with a buffer zone to effectively protect the vibration of the hard disk when it is inserted.

2. Does vertical placement of the hard disk damage the hard disk? This may require more professionals to give answers. Of course, if the time is not too long, it is no problem to put it vertically.

3. It is recommended to optimize the design of the power adapter, which is slightly bulky.

Get free trials and professional reviews every day, follow the Woaiqiku official account, and get 2 free opportunities to receive digital products every day!