Reject humidity, starting from a dehumidifier
Reject humidity, starting from a dehumidifier

[Do we need a dehumidifier at home?]

In fact, for a long time, I always thought that dehumidifiers were mostly used in business, until one day I saw that the sofa at home was moldy, the latex paint on the roof began to fall off, the washed clothes were put in the wardrobe, but I felt moist when I wanted to wear them, and my legs began to ache when the weather was bad, Maybe I should start to pay attention to the humidity of the air at home.

The air humidity most suitable for human health is about 40% - 60%. When we had humidity detection at home, we found that the humidity in every room was more than 70% Love to play computer games We got the new dehumidifier of Yidunpu in 2016 during the trial. Thank you very much. The actual experience of dehumidification is also brought here.

[Simple appearance, it looks like a small air purifier]

Pulis dehumidifier is made of white plastic body. There is no redundant design in the overall design, which is very simple and grand.

The top of the fuselage is designed with a storage handle, a control panel and an air outlet.

The packable handle design not only facilitates handling, but also makes it look more simple.

On the control panel, functions such as status view, humidity setting, humidity display, timing setting and quick key can be realized.

The air deflector is designed below the control panel, which can make the Pulitzer dehumidifier look more simple when not in use, while the air deflector must be opened when the machine is running.

The upper part of the fuselage is the air inlet, and the lower part is the sump.

A filter screen is designed at the air inlet to effectively prevent dust from entering. Because of the air inlet position here, the air filter screen supports disassembly and cleaning.

After removing the filter screen, you can see the continuous bent pure copper condenser tube. The temperature and humidity sensor is designed above the condenser tube.

If you think the water tank is not big enough, you can also use the drain pipe attached with the machine to connect the drain outlet, so that you can dehumidify for a long time.

The water tank at the lower rear side of the fuselage can be removed. It will be found carefully that when the water tank is removed, the outlet will also be blocked at the same time, effectively preventing water seepage.

The water tank has a capacity of 1.8L, and an inverted port is designed on one side of the water tank.

Of course, you can also directly remove the whole upper cover to pour water.

The only thing worth mentioning is that there is a small electromagnetic float in the designed water level slot of the water tank. When the water level rises, the electromagnetic float will also float automatically. When the machine senses that the electromagnetic float reaches a certain height, it will automatically stop working, so as to prevent the condensate from overflowing. Therefore, the electromagnetic float is prohibited to take out.

[Simple operation, supporting remote control in addition to manual control]

In terms of operation, apart from the simple and clear control panel for direct operation, Pulis dehumidifier also supports remote control of Alibaba smart app. Alibaba Smart is an official smart app application launched by Alibaba Xiaozhi Internet of Things platform, which allows users to operate smart devices at home. At present, Alibaba Smart has collected a large number of smart home products and continues to open access.

Find the Pulis dehumidifier in the added equipment, and click Add to complete all settings according to the prompts.

After adding, you can view the real-time data of temperature and humidity detected by Pulex dehumidifier in the app interface, and support remote quick closing and timing settings. The remote control interface is very simple, and the operation is also very simple.


[A full tank of water with visible dehumidification effect]

In terms of operation, Pulis dehumidifier is very simple and easy to use. How about its use effect?

Let's see how the Pulis dehumidifier works first. The dehumidification principle of the Pulis dehumidifier is to first draw the indoor air into the condensing tube in the machine body, then the wet air will condense into water when it is cold, and then slowly drop into the water tank. The condensed dry air will be discharged by the fan finally.
The Pulis dehumidifier was directly placed in the bedroom for startup. After startup, it was tested that the indoor air humidity was 73%, and the humidity was too high.

Place the thermometer and hygrometer at the air outlet of the Pulis dehumidifier, and it is detected that the temperature of the air discharged from the Pulis dehumidifier is 22 degrees, the humidity is 37%, and the current normal room temperature is 15 degrees. It can be seen that the temperature of the air discharged from the Pulis dehumidifier is higher than the room temperature, so even in the big winter, the wind blown out by the Pulis dehumidifier will not make people feel cold.

The circulating air volume of PULISS dehumidifier is 90m3/h, and the size of my small bedroom is only 13m2. After the actual test under the closed door and closed window, the humidity in the room can be reduced from 73% to 63% after about two hours. After continuous operation for more than 24 hours, the real-time humidity in the room is basically kept at 56%, and the humidity cannot be further reduced. The reason may be that the indoor temperature is low, and the doors or windows of the room cannot be completely closed. When there is still moist air entering the room, it cannot reach a lower air humidity. If the indoor temperature is higher, the dehumidification effect should be more obvious.

After less than a day of continuous dehumidification, the water tank of the Pulis dehumidifier is full of water (the higher the temperature, the better the dehumidification effect, and the current room temperature is 15 degrees). Because of its electromagnetic floating design, when it rises with the water level and reaches the highest water level, the Pulis dehumidifier will automatically stop working, And the water full indicator on the left will also light up at the same time, without the fear of water spilling out and polluting the floor.

Open the water tank, you can see full of clean water, it is hard to imagine that there is so much water in our air. Finally, the total amount of water treated by the dehumidifier is 1.8L. It is not only environmentally friendly, but also chlorine free, which is better than tap water for watering flowers.


[In addition to dehumidifying the air, it is also good for drying clothes]

Everyday when I look at the dew on the glass window, I already know that the air humidity at home is too high.

I want to dry clothes outside the house. In such a humid season, clothes that have been dried for a long time are always moist. I always feel that they have not been dried, and recently the haze has become serious. In such bad weather, I really do not want to let the washed clothes be put outside for secondary pollution.

However, drying in the house will only continue to increase the humidity in the house. At this time, if there is a dehumidifier at home, you can aim the air outlet of the dehumidifier at the clothes to be dried. It will have unexpected results and is very practical.


About noise:

Pulis dehumidifier will make some noise in the work project. Part of the noise is from the motor fan, and the other part is from the compressor. After the mobile phone software test, the noise at the air outlet is the largest, reaching 64dB. If it is placed in the bedroom at night, it will actually affect sleep, while if it is in the daytime, the distance is a little farther, This kind of noise is very small.


About power consumption:

In the process of standby, the actual power consumption of Pulis dehumidifier is 0.5w, which can be almost ignored.

In the process of operation, the power consumption of Pulitzer dehumidifier mainly comes from the motor fan and compressor. When the compressor stops and the motor fan is only running, the actual power is only ten watts. In most cases, the fan and compressor are working at the same time. When they are working at the same time, the total power of Pulitzer dehumidifier is about 165w, That is to say, the power consumption is more than 3 degrees a day after 24 hours of continuous operation.


Write at the end:

People living in humid air really need such a dehumidifier at home, especially in such a cold and humid winter. The dry room can not only make people feel warmer, but also be more beneficial to our body. I live in a city with high humidity. Because of the humidity, all people here rely on spicy food to resist the cold and humidity, In fact, if we want to change our living environment, we really need a good dehumidifier. The PULISS dehumidifier I experienced this time has a simple overall design and a versatile style. In terms of functions, it has a very significant effect for the environment with small space. In addition, it also has the support of Ali Intelligent. Remote monitoring and control can also help users better improve the air environment. If you like to hang clothes at home, Pulis dehumidifier can still be transformed into a dryer, allowing clothes to dry faster. Finally, the only thing to note is that it is better to close the doors and windows in the dehumidification process to get a better dehumidification effect. In areas with severe humidity, it is also very necessary to open the Pulis dehumidifier 24 hours a day.


Get free trials and professional reviews every day, follow the Woaiqiku official account, and get 2 free opportunities to receive digital products every day!

Share:
The article on the trial of iGo is completed by netizens, which does not represent the views of this website.
ordinary
Crazy technology, swinging fish
Share Weibo Share WeChat
 Aigoji WeChat

Aigoji WeChat

 WeChat

WeChat

Recommended products

Sorry, the product you are looking for is not available in the product library

on trial