Write in front

Smart home, as a close and extensive ecological chain, seems to be ethereal but very close. The smart gimmicks created by various black science and technology terms are the main reason why consumers are confused and feel that smart home is ethereal. In fact, many smart home products have put their tentacles into life.

As a member of a larger and wider range of smart homes, intelligent cleaning has a high frequency of occurrence. As early as a few years ago, the concept of sweeper has been competing in major media platforms. After so many years of development, it has also been applied with the word "smart"; However, in addition to the need for higher cleaning effect, intelligent sweepers can show "intelligence" in terms of how to achieve intelligent obstacle avoidance, how to achieve intelligent return charging and replenishment, and how to improve human-computer interaction.

The product that brings this experience is the "inxni within X332" intelligent navigation APP visual full-automatic sweeping robot. With all the above doubts, let's see if it can meet the daily cleaning work of the bachelor?

Experience&navigation implanted with laser detection technology brings obvious avoidance effect, but there are also blind spots:

This "inxni inside X332" sweeping robot is implanted with laser detection technology, and has the advantages of 7 meter detection radius and 0 mm scanning error to improve the effect of avoiding obstacles in advance when using the equipment; The direct use effect is that "X332 within inxni" can avoid obstacles in advance, effectively reduce the phenomenon of equipment collision, protect equipment while also protecting items, and reduce the damage caused by collision with fragile items.

It is reasonable to say that there will be no collision with obstacles, but the author can still realize some blind areas of "inxni X332" in laser detection after many days of use; First, for low height obstacles, such as books, mobile phones, remote controls and other objects below 5cm, "X332 within inxni" cannot use laser detection technology to achieve environmental detection, planning in advance, and effective avoidance; Secondly, during the experience, we can find a very strange phenomenon that "X332 within inxni" can not enter or exit in some narrow rotating spaces due to avoidance.

In addition, what else is outstanding about "inxni inX332"? As far as the current sweeping robot brands are concerned, they are mainly random collision type and path planning type; Random collision type is equivalent to headless flies. It has no fixed route and only detours by collision induction. This type of product is equivalent to semi disabled, which is not only easy to damage things, but also has poor cleaning effect. It is rarely equipped with automatic return charging function, and belongs to semi mechanical product; The path planning is relatively advanced. It can achieve the effect of no dead angle by cleaning the pre designed route, and can avoid obstacles and automatically return to charge through memory/GPS positioning.

On the basis of path planning, "inxni within X332" uses laser detection technology to achieve 0mm scanning error for the area within a 7-meter detection radius. Although there are restrictions on object height, it is undeniable that compared with GPS detection technology, it has better performance in machine practicability and ease of use.

Unpacking&packing is fine and dense, with strong protection in transportation safety:

This is not the first time for the author to contact this kind of intelligent products. For the delicacy of packaging, each brand is very similar; The outer package of "inxni inner X332" is full of fashion and technology. It has a strong sense of science and technology, whether it is the huge product design on the front, the function introduction on the details, or the product nameplate on the back. The style of using cardboard box materials with handles is also a feature of many large and medium-sized household appliances.

In terms of internal protection, "inxni internal X332" uses fine foam cotton with good impact resistance, pressure resistance and moisture-proof effect to cover up and down. There is no problem in terms of transportation safety. Compared with some brands that use modular cardboard boxes to fill, it has a further safety protection.

Configuration&in addition to standard configuration, with side scan and dust filter screen:

The sweeping robot can be described as a dazzling array of configurations. Regardless of the body and charging base, its characteristics of cleaning and vacuuming mean that it needs to carry a garbage storage box, which can be disassembled for cleaning. This is the biggest difference between the vacuum sweeping robot and the mopping robot in design.

"X332 within inxni" is equipped with "intelligent cleaning robot host (including side scan head and garbage storage box) * 1, manual * 1 after-sales card * 1, sofa/table foot pad * 8, cleaning brush * 1 screw * 2, cross screwdriver for replacing side scan * 1, charging base * 1, power adapter * 1, and spare side scan * 1 and dust filter * 1 that can be replaced by users" as standard; As far as the configuration is concerned, "X332 within inxni" has a set of replaceable spare parts in addition to its own cleaning equipment. After the initial purchase, it does not need to purchase accessories for a long time.

Main body&configuration&characteristics:

The "inxni in X332", which integrates "laser navigation, path planning, and App visual interaction", brings the primary feeling of being very active and fashionable. A ring of anti-collision rubber wraps the orange body inside, like an ultra-thin vacuum tire of a car, which is very suitable for young people's restless style.

In terms of hardware configuration, "X332 within inxni" is equipped with an ARM core processor, which works with Luban's algorithm to independently calculate the optimal partition scheme for orderly cleaning. The bow shaped planning route is adopted to improve the cleaning effect by 50%; One side scan design can further reduce the power consumption and has a 50% overlap of cleaning areas, but there is also a phenomenon of turning down to clean blind spots. The 95% of the actual cleaning area is missing 5% because the side without side scan cannot be fully considered when turning around.

"X332 within inxni" has a built-in 2000mAh battery, which can last for about 100 hours when fully charged, basically meeting the needs of small and medium-sized households; It supports automatic homing charging. Each charging time is about 90 minutes long, which is basically within the acceptable range. After homing charging without completing the cleaning operation, it automatically returns to the memory position to continue cleaning, which has a good humanized performance.

The "inxni inside X332" has a cool side under the bouncing orange. A black mirror design can be seen from the front of the side. If its flat body is not considered, this angle is like a future mechanical war police.

Behind this mirror is the unique laser detection function module of "X332 within inxni", which can scan objects with a radius of 7 meters for route planning and obstacle avoidance in advance; The further advantage is that the "inxni within X332" does not only use laser detection technology, but also retains the collision type induction avoidance function, which can achieve obstacle avoidance through two approaches.

Laser detection technology is "inxni The main highlights of the Nei X332 "stand out among similar products, which not only help the equipment to achieve rapid scanning planning for new environments, but also is significantly higher in terms of" safety "than the sweeping robot without this technology, which is mainly manifested in avoiding this design in advance. In the actual experience (video at the beginning of this article), it can be seen that the laser detection technology is" inxni The inner X332 "has a strong advantage in early avoidance.

A closer look at the design of the garbage storage box at the rear of the fuselage shows that there are not too many screws fixed here, and the press type spring buckles are used on the whole, which makes this part have a good performance in cleaning. At the same time, the air outlet of the vacuum cleaner is designed as a hollow inxni product logo, which guarantees the function and obtains a good appearance.

The concave display mode of the switch on the right side well maintains the arc effect of the whole machine, which is to turn on/off the power supply. There is nothing different here.

From the layout and distribution of the bottom of the whole "inxni inner X332", it can be seen that the common three-point balanced universal drive design is adopted, and two driving wheels cooperate with the front universal wheel to achieve 360 ° steering in situ; In addition, it can also be seen that this product focuses on the design of the center of gravity. All kinds of motors and built-in batteries are in the middle and front ends, and the middle and rear ends are only the areas of glue broom+roughing broom+garbage storage box+vacuum cleaner.

Nearly half of the dust collection and cleaning space means that "X332 within inxni" has a good performance in terms of dust collection area and garbage storage capacity, which can be seen from the design.

In terms of driving wheel design, the two driving wheels "inxni inside X332" are wrapped with rubber interlaced grids, which can achieve good anti-skid effect. In addition, they also have a certain obstacle crossing effect.

As far as the actual experience test is concerned, "inxni within X332" is not a big problem for the lower rails of some aluminum alloy sliding doors and the floor (height difference 1-5cm) at the junction of rooms/living room walkways/balconies of modern urban commercial houses; The universal wheel that can be observed under careful observation has a certain bevel design, which means that when encountering uneven terrain, "X332 within inxni" will use the speed to "rush" the universal wheel, and the rear drive wheel can "lift legs" through the telescopic design.

If "speed and thigh" is used to adapt to the environment for the "X332 within inxni" of the height difference ground, what about the dead end? Although the environment where this product is used is mostly flat ground, the phenomenon of "cliff and gobi" cannot be avoided sometimes.

Through the front end of the bottom of "inxni inside X332", it can not be found that the front and left and right sides are equipped with a distance sensor design, which is combined with the driving wheel to identify the terrain environment. Therefore, in the actual experience, we will not see the tragic phenomenon that it has no way to go, and it can be said that it is the most basic part of equipment protection.

It is also mentioned above that "X332 within inxni" designs most of the weight of the whole machine at the front half, so it can be seen that the charging part of the base contact is different. The metal contact pieces are designed at both sides of the universal wheel, calibrated by the laser detector/distance sensor, and the equipment automatically drives into the charging base to complete the endurance supply.

In terms of structural design, the dust collection and cleaning part has not seen much improvement. It mainly follows the ground cleaning principle of "pouncing, sweeping and suction", and the garbage inside the garbage storage box has also been sorted to a certain extent. For example, "hair, dust, large foreign objects" will be distinguished according to the size of the material.

As far as vacuum cleaning is concerned, there is no doubt that the most troublesome thing for Virgo boys is "curly sweeping". After using it for a period of time, it is not difficult to find that "curly sweeping" will be wrapped with a lot of hair and other garbage. Those who have used curly sweeping know how difficult such cleaning is. If they do not comb and clean in time, then "curly sweeping" will basically wait for retirement, But the difficulty of combing and cleaning is a pain!

Finally, let's take a look at the design of the charging base of "X332 within inxni". Although the common split disassembly design is also used, people with sharp eyes can still find its "difference".

Contact type metal probe of charging base.

Both sides are equipped with DC power holes to facilitate users to select the access direction.

The base is equipped with scratch resistant silicone design. The area is enough, the stability effect is OK, and it is not too outstanding.

The intelligent return charging technology is improved, which can be achieved without GPS:

When used for the first time, the body must be within 0.5 square of the charging base to facilitate the memory recognition of the machine. This is very different from the common GPS positioning and homing. It mainly depends on the memory chip inside the "inxni X332" combined with the laser detector to successfully complete the intelligent homing charging.

This "inxni inner X332" featured in "laser detection technology" does not see the technical firmware with additional settings such as "GPS navigation and radar" on the charging base, but uses two rectangular grids of different sizes to make "inxni The laser detection module in front of the inner X332 "drives in by itself, which can be said to have a very direct improvement in both cost control and process upgrading, and also makes full use of the laser detection technology of the machine itself to make automatic identification and return charging more accurate.

One touch start, intelligent scanning of clean environment, planning of cleaning route:

For bachelor Wang, the implantation of intelligent cleaning equipment is due to "laziness". In addition to high facial appearance, the selection of intelligent cleaning equipment is more important because it is easy to use and take care of.

Can "inxni within X332" meet the needs of singles?

The body key area of "X332 within inxni" is designed as an "8" shape combined with two rings. The inner circle is switch touch, and the outer circle is "working status code, power display and manual return charging touch".

As far as use is concerned, "X332 within inxni" does not need too much regional planning and route planning. The machine can be started directly with one button, and the area within a radius of 7M can be rotated and scanned in situ through laser detection technology to generate environmental renderings and intelligently plan clean routes.

The "inxni within X332" above the threshold is really "small white", which is more than that users can reserve cleaning time through mobile phones. As long as they regularly check whether the garbage storage box is saturated, they don't need to pay attention to it at ordinary times.

Convenient garbage storage box disassembly and cleaning design:

The "inxni inside X332" is a great highlight in the use of laser detection, and it also has a good performance in the disassembly design of garbage storage boxes. Even the author, who is not fond of cleaning, thinks it is "simple", how about its actual performance?

"Inxni inner X332" effectively reduces the positioning of various screw layouts through the ingenious design of spring clips, so it is easy to disassemble the garbage storage box. Just press the spring clip above the vacuum cleaner to take out the garbage storage box for cleaning.

The garbage storage box and the vacuum cleaner are also combined and fixed with spring clips, so the use of the vacuum cleaner will not be affected even if the whole storage box is washed with water when the vacuum cleaner is removed during daily cleaning.

The garbage storage box "X332 within inxni" is also mentioned above to have a certain garbage classification design. Large objects will be sucked into the largest storage cell, and smaller dust will be adsorbed on the replaceable removable dust filter.

In terms of storage box cleaning, it mainly provides two disassembly functions, namely, large object garbage cleaning and dust filter replacement. For single people, the whole body can be soaked and washed; It is so simple to pour the garbage that can be taken out directly into the garbage bag, remove the dust filter net, and directly put it under the tap for washing.

The drawback is that the number of times the dust filter can be reused is limited, especially after being soaked in water, it can hardly be reused, and there is a certain equipment replacement cost.

The dusting and curling rollers are also designed for dismountable cleaning. Here, it is mainly convenient for users to use hair combs to clean the curling rollers. But for bachelor Wang, he would rather change a curling roller than bother with all kinds of hair entangled with big heads.

The following figure shows the cleanable area of "X332 within inxni" after disassembly.

App related:

The "inxni inX332" is equipped with the self-developed "inx" app. From the perspective of the entire app function, it can not be said that it has a deep two-level interaction experience, nor can it do remote control, but it has a good regional display effect, and has a different presentation in the fixed-point regional plan.

In terms of links, the WiFi hotspot emitted by the "X332 in inxni" itself is used for connection to achieve synchronous control. Users can quickly pair by scanning the QR code on the phone body/instructions, and can also manually connect.

When it was first used, the connection speed was very fast, and the connection was successful. However, the connection stability of the entire app was not high, and it was very easy to pop up/app stuck bugs. According to the official doubt, it was a phone brand compatibility problem, which meant that "X332 within inxni" had certain requirements for the phone model and system version.

As far as the whole app interface is concerned, it is not complicated and is not difficult to get started. It uses the interface effect of large area of status text display at the top and sliding functions at the bottom to provide users with "task planning, map, help, setting" and other functions. There are also three obvious functional designs at the bottom and middle of the app: "return charging, automatic cleaning, help".

If you want to highlight, it is undoubtedly its "map task" function. By turning on and rotating in place through "X332 within inxni", the laser detector in front of the equipment scans the working area within the radius of 7M, and displays the mapping map to the app end in real time. Users can zoom in and indent the map through two fingers, and accurately specify the cleaning area, "X332 within inxni" will go to the designated cleaning area to work on its own after receiving the instruction, and the laser detection technology of "X332 within inxni" makes it have excellent performance in terms of accuracy.

Advantages and disadvantages of similar products:

What are the advantages and disadvantages of "inxni within X332" among similar products?

In terms of modeling design, "X332 within inxni" is not the kind of geometric sweeping function described. Many brands like to say that "radar, GPS" receiver/transmitter is designed above the equipment. The modeling is strange and not mentioned. It is also easy to bump in a small clean area. The author highly recognizes the "X332 within inxni".

The navigation technology "inxni inside X332" uses laser detection technology, which has extremely humanized performance in the mapping of new environment and path planning, but this is not absolute, and the performance that narrow areas can not enter makes the author feel helpless.

On the basis of laser detection, the fixed-point area obtained by combining app is clean and accurate with high performance. Compared with radar detection and GPS scanning, the agile response shown in real-time obstacle scanning and mapping can be seen.

Next is the cleaning effect and noise performance, although "inxni Within X332 ", the cleaning area can be improved as much as possible by increasing the suction port and bow path planning. It is undeniable that the current intelligent sweepers only focus on light cleaning, that is," simple garbage cleaning and dust cleaning ". It is absolutely impossible to achieve the cleaning effect of manpower, which is suitable for single people who do not often clean, Can bring visual clean effect, similar to oil pollution is completely useless.

We can think of "inxni within X332" as a mini handheld vacuum cleaner, which will not produce the noise as loud as an ordinary household vacuum cleaner, but we can not expect to obtain extremely quiet performance. If we have to describe a scene in the display life, the noise caused by turning on the shower/faucet to the maximum is basically equivalent.

Finally, I want to mention the compatibility of the app. It is undeniable that "inxni Inside X332 "can also operate by itself after leaving the app, but the compatibility and stability of the app need to be strengthened. The author repeatedly encountered the problem that the password is invalid when scanning successfully and the password is correct during the experience. Only after the phone is restarted can the app be used normally at the first time. If you flash back, exit, and the background app in the middle, I am sorry, Please restart your phone!

Experience overview:

For bachelor Wang, why do you need a sweeper is a very real problem. If you are too busy to clean frequently, "inxni within X332" will help you keep your home spotless, but it is impossible to completely replace manpower to clean.

The "inxni within X332", which is suitable for light hygiene and daily cleaning and maintenance, combined with new laser detection technology, can more effectively protect household fragile items, plan cleaning routes, but still keep the price at the mid end level of ￥ 2500. Can it satisfy the bachelor?

First hand free trial and product experience articles can follow the WeChat public account: GooglePlay, WeChat search: woaiqiku can also get Qiku digital product information at the first time!