After finishing the decoration of the home, it is often found that the reserved wall type power supply port on the wall is insufficient. After adding projectors, stereos, game console boxes and other equipment to the sockets originally reserved for TV and boxes in the living room, the power supply port is far from enough to meet the needs of users. At this time, perhaps the best way is to add special sockets. How many outlets can be used? Different people must have different definitions, but for the vast majority of families, ORICO's lightning protection and surge protection suit is enough to meet the use.

When I received the package, the volume of the package product still surprised me, which was much larger than I expected. In terms of product packaging, the two larger equipment are environmentally friendly kraft paper packaging, and the smaller equipment is the packaging with excellent hanging printing.

The back is the basic technical parameters and manufacturer information of the product.

The three products are all designed in white, and their shells are designed with high-quality fireproof and flame retardant materials.

The back of the product is designed. Two large devices are the basic parameters of the product. In addition to parameter information, the power input port is located on the back of smaller products.

In addition to the products, the manual mainly introduces the technical parameters of each interface.

The XPC-3A2U smart USB mobile socket converter can also be seen from the product definition that the product mainly defines the converter, so the power line input mode is not used. There is no wire on the front. The front of the product has 3 AC input ports and 2 USB output ports.

The back of the product is a three port AC input port, which can easily plug the device into the wall socket to expand the wall socket.

There are two USB outlets at the upper left corner of the product, and three AC outlets at the bottom. The AC output adopts the new national standard 3+2 jack design with an electric shock resistant safety door, which is safer for users with children at home.

In addition to the docking function of the plug row, the XPC-3A2U smart USB mobile socket converter also provides a more interesting design, which can place mobile phones, tablets and other devices above the plug row, which is very convenient for charging.

Seen from the side, the front end uses a special shelter, and the back can be close to the wall to avoid the mobile phone having no place to place when charging.

The no-load output voltage of the USB port of the product is DC5.18V. Unfortunately, the plug does not support fast charging methods such as QC2.0 and QC3.0. It is expected that similar products will be launched later.

After the load is connected, when the charging current is 0.84A, the voltage of the product decreases, but it is completely within the normal range. For daily mobile phone and tablet charging, it can fully meet the use needs.

The spacing between the two USB outlets of ORICO is not too wide, but it can fully meet the needs of users who use two special charging lines for charging. The maximum USB single port output can reach DC5V/2.4A, and the total USB output power can reach 20W. It has the function of intelligent identification of charging current.

The size of XPC-3A2U is not too small, but compared with the other two types of inserts, it is insignificant. Its length is less than the total width of the other two products.

NPC-4A2U USB multi-function digital plug provides four AC output ports and two USB output ports, and adopts independent AC output control switch. The product provides a total overload protection switch and four independent AC switches.

The upper part of the product is the ORICO mark, the lower part of the mark is two USB output ports, and the left side of the mark is the main control switch of the plug.

The AC output holes of the plug row all use independent AC switches, the AC output ports use the new national standard five hole AC output ports, and the AC output holes all use electric shock prevention safety doors, which have two pole and three pole independent protection and do not interfere with each other.

The middle position on the back of the insert is the information parameter of the product, and the design of anti-skid pad is around.

Hanging holes are designed at the top and bottom of the plug row to facilitate users to hang the plug row on the wall.

The USB no-load output of the patch board is DC5.24V, the maximum output of a single port is 2.4A, and the maximum total USB power can reach 20W.

Connect the Xiaomi 4i of the author for charging. After the charging current reaches 1.34A, the output voltage is DC5.15V. The built-in automatic charge identification chip can basically meet the charging of all electronic devices in the market that use USB port for charging.

The largest product in this package is HPC-6A5U USB smart patch panel. The patch panel is designed in white color. The product provides 5 USB charging interfaces and 6 new national standard sockets.

The socket provides a general power control switch. The socket has an overload protection function. When the power exceeds 2500W, the power supply will be cut off automatically to prevent users from overloading and causing unsafe power consumption. However, the product does not have self recovery function, and can be manually recovered after the overload is eliminated. The AC output holes are all designed with electric shock proof safety doors, which makes the use safer.

Five USB output ports are provided on the side of the product.

It can be seen from the shell design that the power supply output design part of USB is located below the ORICO mark.

The USB no-load output of the smart plug is DC5.19V, and the USB port spacing design is very reasonable. Daily use can fully meet the charging of digital devices including tablets, mobile phones, headsets and so on.

After the load is connected, the output current is 1.35A, and the voltage is DC5.08V. USB single port output can reach DC5V/2.4A at most, with intelligent recognition function. The total output of the five USB port modules can reach DC5V/8A, and the maximum output power is 40W.

Summary

ORICO lightning protection and surge protection kit provides a total of 13 new national standard AC five holes and 9 USB charging output holes. The AC output holes all adopt the design of anti electric shock safety doors, which have independent protection functions and do not interfere with each other. The USB output adopts the intelligent recognition charging technology, and the maximum output can reach DC5V/2.4A, which can fully meet the power supply and charging of digital devices such as tablets and mobile phones. It has the overload protection function. When the maximum power is exceeded, it has the function of automatically cutting off the power supply, making it safer to use.

First hand free trial and product experience articles can follow the WeChat public account: GooglePlay, WeChat search: woaiqiku can also get Qiku digital product information at the first time!