Preface
As a car owner, the most worried problem is that there will be accidents during driving, which may delay time and waste energy, or cause serious injuries. If there are scum, no recorder on the car, and no cameras around, it is really hard to identify a hundred people, and I can't say clearly So the first thing I did after I bought the car was to install a recorder. The effect of the current recorder can't be explained. The only regret is that there is no one click capture, video recording, etc. Sometimes it is too late to use mobile phones to record some interesting things and beautiful scenery while driving, and it is too dangerous to use mobile phones separately when driving. The one click photography of staring and taking pictures perfectly solves this problem. When I drive now, I will take several videos almost every day, including funny pedestrians, beautiful scenery and various violations that most annoy my driver friends.
A few years ago, Staring and Shooting had been followed on a treasure, but there was already a recorder in use at that time, and the requirements for the recorder were not high at that time, as long as it could be recorded, it didn't matter as far as the pixels were concerned, even if there was a car accident, as long as the recorder recorded the complete process, it didn't matter whether it was clear, This is my idea at that time. What changed my mind was a scratch accident. At that time, I had a drink, and the car was driven by a novice who had just taken a notebook. Then suddenly an SUV came out of the car, scratched the reflector, and ran away. It was not safe for the novice to chase me. I wanted to go back to watch the video and report to the traffic police. It turned out that I was really drunk after I went home. It was a bit dark at that time, and the other party was driving very fast, so I couldn't see the license plate clearly, so I had to be dumb this time.
Unpacking
▲ The outer package of staring and shooting is white, and the interior is gray and white. Does it look like the picture style of the once popular mobile game "Find Your Sister". Along with the host is the highlight of this recorder accessory, the wireless camera button. In the future, if you meet any beautiful scenery on the road, you can click on the beautiful sister.
▲ The shape of mini2 makes me think of a projector, Nut P2, which is very similar in shape and simple in style. One lens has no other buttons on the whole body.
▲ 140 ° wide-angle vision, built-in wifi module, 6 sets of glass lenses, F1.8 large aperture and other mainstream configurations. No matter how good the configuration is, it is useless if it is not optimized, so here we will not introduce it one by one. If you need to know something, you can check it by yourself [staring at the mini2 intelligent driving recorder for free trial //tryout.fanlma.cn/item/241/detail 】。 The whole body of the mini2 is really a mini. One hand can be completely held in the palm of the hand. It is almost invisible when installed behind the rear-view mirror. There is no need to worry about blocking the driving line of sight.
▲ The side of the fuselage can be opened, and the TF card slot is hidden here. It can support up to 64GTF cards. It is recommended to use a class 10 high-speed card to ensure stability during recording. A little below the slot is the Reset key.
▲ The main part of mini2 is a bearing link, which can rotate 270 ° as a whole. During installation, only the horizontal position needs to be aligned, and the upper and lower angles can be adjusted later. For example, if you are tired of shooting in front of you, you can rotate 180 ° and shoot in the car, playing with different tricks!
▲ 3M foam adhesive is used for the bottom pasting position, so the position must be fixed during installation, and the position can be adjusted within ten seconds after pasting. Use the mobile phone APP to view the effect of the recording picture, and adjust it in time. Once pasting for a certain time, it will be troublesome to fine tune the movement again, or you will lose a piece of 3M adhesive and paste it again, Fortunately, in addition to the 3M glue that comes with the body, the mini2 also gave a random gift!
▲ This button like round lump is a highlight configuration. As long as you are happy, you can press it, and it will take instant pictures. It can also record the video of 5 seconds before and after you take the picture. As long as your phone is connected to the wifi of mini2, it will be downloaded to your phone immediately. After parking, you just need to open your mobile phone to check and share. You don't need to take the TF card to the computer to copy it, then edit the clip, send it to your mobile phone, and share it again. All you need is a click.
▲ The accompanying accessories of the mini2 are also quite complete. The extra long power cord meets various wiring schemes, the necessary wiring of plastic opening tools, the adhesive sticker of the line card, and the dual USB port cigarette lighter.
▲ The dual port USB cigarette lighter power supply supports a maximum of 2A current, which is 3.1A in total. 1A is sufficient for the power supply of mini2. 2.1A is necessary for mobile phone users, and the fast charging effect is excellent.
▲ Two key 3M stickers and a mini host 3M stickers will be given randomly for replacement in the future. When plastic tools are used for wiring, the damage to the rubber of the car body should be minimized. After all, it is painful to remove the warping with fingernails, and the car body will be damaged if you use a screwdriver to lift it. So here, we are still very careful.
install
▲ The above figure is a temporary picture during the test. There are three recorders in the picture, one is Xiaoyi, one is any E-line rearview mirror, and mini2. Xiaoyi and Ren E were connected to the ACC fuse box for power supply. At that time, only two USB ports were connected to the roof. Due to the rush of testing, the power cord of mini2 was suspended directly from the cigarette lighter for the time being, which really affected the beauty. Later, Ren E will be removed to free up a USB port to supply power to mini2.
▲ There are various power supply schemes for the step-down line used by ACC power supply station:
1. The power supply of the cigarette lighter female outlet is suitable for putting in the certificate box or glove box, and then used with the cigarette lighter.
2. USB port power supply. In the above figure, I use the dual port USB power supply scheme. Route the cable to the roof and hide it in the interlayer of the roof. The recorder electronic dog device can be powered directly by using the USB data cable.
3. Micro USB direct supply, DC direct supply scheme, that is, directly plug in the mini 2 of Micro USB to use it. This scheme is too simple, and the interface is limited, so using the USB port's voltage drop line is the most flexible scheme.
▲ The principle of taking electrical appliances from the fuse box is very simple. It is OK to use the electrical appliances to take power from the fuse box, connect the other end to the step-down line, and then supply power to the recorder through the USB port of the step-down line.
▲ This is the diagram of my own car's fuse box connection and wiring, which was moved from another post of my own. My Buick's fuse box is located in the ID box under the steering wheel. The yellow line is the extension line connecting the tap and the step-down line. After all, the line of these two things is too short. You need to connect the extension line to facilitate wiring in the car.
▲ Remove the lower guard board to find the safety box of the host of the trip computer, find the safety position of ACC according to the instructions, and use the extractor to export the "+" level and ground the "-" level; Because the vehicle carries 12v voltage. The recorder we usually use is 5V, so here we need the step-down line mentioned earlier. After 12V is step-down to 5V, we can directly supply power to the recorder.
▲ After wiring, walk along the soundproof strip at the edge of the door to the roof. In some places, it needs a little violence to disassemble them. You can do it by yourself and take your time. Go to the mezzanine of the roof and connect the step-down line. Then hide it in the mezzanine. The recorder will be powered directly from the roof.
▲ ACC power supply effect diagram, cigarette lighter and original power cord can be saved, just use a short Android phone data cable, circle around the rearview mirror for several times, and then connect mini2!
▲ Since there are only two power supply ports for the step-down line, it is necessary to remove any line E to make way for the ACC concealed wire connecting the mini2 to the fuse box to supply power. The final effect looks much more comfortable without occupying the cigarette lighter. The advantage of ACC power supply is that the car power on recorder starts automatically, and the car power off recorder shuts down, which is convenient and practical.
▲ The honeycomb opening on the side of the mini2 is a small speaker. Usually, the prompt sounds are emitted from here, and the sound effect is acceptable. Unlike some ordinary recorders, which even have the alarm or prompt sounds open with a fork, the mini2 sounds crisp and comfortable.
▲ I finally decided to paste the button sized wireless button to this position after looking for several positions. When necessary, I just press it directly, and don't need to reach out and press it anywhere else.
▲ It always seems a little awkward. The size of this button is really a little big. I used to look at the effect pictures on the Internet and thought that this button was only thumb size. After seeing the physical button, I found that this guy was actually a little bigger than the one yuan coin. It was installed in this position, Sometimes there is a little obstruction to the direction (because I like to hold the steering wheel with one hand).
▲ After a few finished pictures, the whole front dashboard looks much more comfortable. Except for the wire of the mobile phone charger connected at the gear, other places are much cleaner, and the position of the cigarette lighter is much cleaner.
Live shooting effect
The following pictures are all directly exported from the TF card without any special modification, and should be the most close to the actual shooting effect. After all, the effect of taking pictures on a fast moving car is certainly not as good as that of taking pictures at rest, so the recorder still depends on the recording effect.
▲ After more than 10 days of use, I feel that the effect is much better than that of ordinary recorders. Although the picture is not too noisy, it is not clear enough (the size of the source file for taking pictures is only about 660KB), and the reflection is quite strong. I have stopped putting anything on the dashboard. However, the horn honeycomb port of the car is designed in the middle, so the reflection is quite obvious. We are considering whether to add a CPL filter to eliminate the reflection. The body of the mini2 is small, so it will be difficult to look when adding a CPL filter.
▲ After the video is uploaded to Youku, after Youku recognizes it, it displays ultra clear, but the effect is slightly compressed. The staring and shooting of each recorded video is 3 minutes (about 220MB). After the TF card is full, the last recorded video will automatically cover the front video.
One click photography and video recording
Here comes the highlight function of staring and photographing. As long as you encounter funny, interesting and low-quality behaviors along the way, you can take photos with just one click, and automatically save the video about 5 seconds before and after pressing the button, and then automatically download it to the mobile app album through wifi.
▲ In the past few days, I have taken a lot of 10 second videos during the use process. Below the three dynamic pictures uploaded in the post are the corresponding 10 second videos. During the driving process, I met all kinds of people and things. It is common for bicycles to reverse and the front car to stop suddenly. There are even electric three wheels changing tires in the middle of the road, and it is also on the national road. What can I say about that?
Mobile APP
Mobile app experience (ios), occasionally there will be black screen fake death. The 10 second video recorded by one click photography is automatically downloaded after connecting to the APP through the mobile phone, and supports sharing to social software. In the future, when encountering interesting videos, or people and things without quality, it is not necessary to copy them to the computer through the TF card reader, cut them, upload them back to the mobile phone, and share them, Directly stare, stare and shoot, take photos and share.
▲ The APP home page is a wide range of videos uploaded and shared by users, including low-quality violations, funny moments, and of course, beautiful scenery along the way. This function makes the recorder not only a recorder, but also a travel camera, recording every wonderful moment. The videos taken by yourself can also be uploaded through one click sharing and sent to the platform, and you can also see the sharing uploaded by nearby friends. It's a bit interesting!
▲ The photos taken by one button will be automatically saved to the mobile phone APP and the mobile phone system photo album, with 5 seconds and 10 seconds of video (only saved to the APP, not to the mobile phone system photo album). Staring and shooting videos captured by pressing buttons cannot be viewed directly on the TF card. The file format is not a conventional video format. Every 10 second video captured is downloaded to the APP album through wifi. If it is necessary to save to the mobile phone system album, you also need to enter the APP album operation to save to the mobile phone system album, This design allows you to choose your favorite videos to save to the mobile phone system, and those you don't want to save will be temporarily placed in the APP album.
▲ When playing the video in the album or staring at the video uploaded and shared by users on the home page square, there are often playback abnormalities, especially when the full screen mode is often blank, and the non full screen mode is OK. I hope the engineer can fix this.
▲ Staring, staring and photographing also supports violation reporting and self violation query functions in several first tier cities. Unfortunately, my city does not support violation query, so does violation reporting. The starting point is really good, that is, the application rate is too low. Maybe in a few years' time, it will be possible to realize the nationwide video reporting of violations, not just the recorder, You can also report the downloaded videos with your mobile phone, and so on. Well, maybe I think too much. Why do traffic policemen play like this?
▲ The setting of staring, staring and shooting is not troublesome, and there is no fancy function. Simply set the resolution, match with keys, and some settings such as voice and date watermarks. Several intimate data query functions are attached, such as the query of logged in mobile phone model and TF card usage.
Summary
It is simple to install, the lens can rotate 270 °, and the body is small and mini, with good concealment.
The effect of one click shooting and recording is much better than that of other brands at the same price.
The one button photographing function of the mini2 is a break from the conventional function of the recorder.
It supports one click photographing, uploading, and sharing to social software in a simple and crude way.
It supports violation inquiry and violation report, with innovative functions, but it supports too few regions.
The sharing function of mobile APP is innovative, and the viewing experience is slightly uncomfortable. We look forward to further improvement.
The article on the trial of iGo is completed by netizens, which does not represent the views of this website.