What is the most important when wandering the Jianghu? One word, safety!

On the road, let's not mention the porcelain bumping party who took the initiative to bump into the car. Even if the car rolled away on the slope, some people would be nervous, afraid and lucky, depending on you to catch up. No harm to others, but we should have a shield against others. Using tachograph is an effective method at present. Therefore, before collecting the car that year, I bought the recorder and took it with me to collect the car.

But after all, there will not be many accidents. Most of the time, the recorder is used to record interesting things. For example, women in white walked on the highway at night; The cement tanker sprinkled water along the road while walking; The traffic police posted the illegal facts when parking for dinner, etc. Fun is fun, but in this era of fast food, sharing is also time sensitive. The recorder in those days had no Bluetooth or WiFi. You need to take out the TF card, plug it into a computer or mobile phone, and export it before editing and sharing. Often, thinking about the complicated process will lose interest.

With the development of wireless technology, intelligent tachographs are gradually popularized, and the staring and shooting mini2 is such a product. thank Love to play computer games And staring at the camera.

1、 Unpacking

Simple white box.

At the bottom of the box, the parameters are in both Chinese and English, while the features are in English only. I hope that Chinese display can be added.

The lid is opened, with interesting patterns. It seems that the small boxes inside are placed in order.

The long box on the left is a accessory box, and the flat box on the right is a manual warranty card. The main engine compartment is fixed and cannot be taken out.

Stare at the mini2 and its remote camera button.

size. A solid feeling. However, to be honest, the size is not much smaller than my original enhanced version of Tianhanghui V5 with screen and lithium battery.

A speaker at one end.

There is a cover on the other end, a reset hole that can be operated directly, and a MicroUSB power interface on the base.

Open the cover, the TF memory card slot is hidden inside, and there are several mounting screws.

TF card, also known as MicroSD card, is recommended to use the high-speed card of Class10, which supports up to 64GB. Officially, the card compatibility with SanDisk is not good, and it is not recommended. I usually don't buy a card with a capacity of more than 32GB. Because it is fragile, it is recommended to backup it frequently. Data is priceless. Too large a capacity means little and is expensive. Second, many devices do not support high capacity cards. It would be better to buy more small capacity cards and change them.

3M glue is used for installation and fixation, and the body and base are integrated, so it is difficult to remove them after installation. Please think twice before taking action.

Attached with the car charger, good quality, like one. But the shape of "staring" makes me dizzy, like the mysterious magic eyes in the temple.

Although the car charger has two ports, the recorder needs to be plugged into port 2.1A, and only one port 1A is not enough.

There are a lot of accessories, including long enough power cord, auxiliary crowbar for wiring, wire fixing device, 3M glue for standby host, and glue for fixing remote control.

The battery cover of the remote control is too difficult to open. After opening it, it is difficult to reinstall the battery because the battery shrapnel always pops out. The battery model is CR2032. It should last for a long time. It's better not to open the hard cover frequently.

The host and remote control are guaranteed for one year, and the charger data cable and bracket are guaranteed for three months.

2、 Installation

The installation position recommended by the official is A-pillar. I tried again in my car, but it was still inconvenient to walk on the A pillar. Like the original recorder, I walked on the B pillar, and the length of the cable was enough.

But I can't remove it if I don't want to install it. Wow, please give me a 3M mushroom buckle. This thing is good. It is firmly glued and installed. It is stronger than velcro. It can also take the recorder off the car at any time.

what? Anti theft? The thief really wants to get rid of him, but how can he stop him. On the contrary, it can be taken down and hidden at any time to effectively prevent thieves from breaking the glass.

3M glue is good, no residual glue, easy to remove. There are several mounting screws below.

Cut mushrooms of appropriate size and stick them on.

The film on the remote control is used directly, and there is no residual glue. It can be removed at any time. If the viscosity is insufficient, the viscosity can be restored by washing.

The left side of the interior rear-view mirror is recommended by the official. I think it blocks the view. In the middle, there are vehicle light and rain sensors, as well as ETC OBU and old recorder. I used 3M adhesive to stick the base of the old recorder, but it's OK if the body and base can be separated. Otherwise, the suction cup is too easy to fall off. It's really scary. So it was decided to fix the mini2 on the right side of the interior rearview mirror. Why not put it beside the old recorder? Because the lens for staring at the mini2 can rotate 270 °, when turning to shoot the view angle inside the car, it will be blocked by the inside rearview mirror.

The cable tie, which was originally thought to be cumbersome, has found a new use. When routing through the seat, it can be glued to the flannelette on the floor, playing a certain role in fixing the line.

It's installed. Avoid the shadow area, do not stick to the front screen film, and the view angle inside the car will not be blocked by the rear-view mirror.

The remote control camera button is placed next to the handlebar, which does not hinder driving safety.

Flip out the idle Meizu M9 mobile phone and upgrade it to the latest Flyme system, which can be installed and used as the mini2 display screen. Why do you do this? After the mobile phone WiFi is connected to the recorder, the network is disconnected and 4G is unavailable. Of course, it doesn't matter if there is no spare machine. I'm just trying to play. In fact, for one thing, the performance of the M9 is limited, and the pictures and videos with too high resolution seem laborious; for another, the captured photos are automatically downloaded to the mobile phone. If you want to share them, you still need to have the network, and the standby phone does not have a SIM card. Moreover, it is not supported to connect two mobile phones to the recorder at the same time. If one is connected to the second, the previous mobile phone will be disconnected.

Now you can turn off the screen of Tianhanghui V5. Dual recorders are not afraid of V5's laziness. For a while, the V5 could not be turned off after it was turned on, and it was still not recorded. It was fixed in that picture. It's not good to upgrade the latest firmware. Later, I found that it would be better to take off the TF card and format it. The screen has been turned on before, so as to observe its working state.

One to three is Goodyear GY-2533, with independent control switch, and 3M double-sided adhesive is also attached to the car. The car charger is placed at this angle to avoid its light affecting me as much as possible.

After the garbage can is put in place, it is more afraid of the influence of light. Smoking is strictly prohibited in my car, so the ashtray has been left for a long time, and the garbage can is easy to place.

Rush out of the basement and view outside the vehicle.

Interior view.

There is a little "regret" in the view angle of the car at this position, that is, I can only be photographed with a little bit of the driver's seat. But it's also good. It's strange that I always feel in the picture. When I want to take a group photo, I can just go there.

In the hottest year in history, the mobile phone was very hot, so it was overheated after taking two photos outdoors.

3、 Usage

Download and install the APP, you can scan the QR code, or search for "staring, staring and taking photos" directly in the app store.

Title advertisement.

Square, dynamic, up-to-date, many social attributes. The problem is that these all need to be connected to the Internet, and when the mobile phone is connected to the staring hardware, it can't be connected to the Internet. Big problem of WiFi intelligent tachograph.

After powering on, the staring and patting mini2 automatically starts up, and the hot spot name is "vYou_DDPai_mini2".

The manual says that Android phones should not be connected to peering WiFi in phone settings.

The default password has been filled in. Just log in directly. The password can be customized in settings. If you forget the password, press and hold the RESET key for 6 seconds to restore the factory setting. The factory password is 1234567890. It is suggested that you must change your password, otherwise someone will see you staring, staring and patting, and use his mobile phone for a while? Where you have been, what you have said in the car will be revealed.

Log in to the APP to support WeChat, Weibo and official website accounts, or directly register with your mobile phone number.

It is the first time to see an app that supports so many languages.

Help provides solutions to many common problems and function related problems.

The network connection is good, but the firmware cannot be upgraded in any case, neither WiFi nor 4G.

Finally, the PC downloads the firmware and sends it to the TF card.

Firmware download address and upgrade method: //www.ddpai.com/bbs/thread-23468-1-1.html 。

The firmware version information is checked in "I ->Settings ->Camera Settings ->Camera Information" after the recorder is connected to the mobile phone.

The memory card should be formatted once with a recorder. However, there is also a problem here. Don't click in again after the format is successful. After clicking in Storage Management, it starts to format automatically. I have checked it several times. Wow, my heart aches.

Because photos and videos need to be sent to the mobile phone to view and save for sharing, the storage space of the mobile phone itself is also very relevant. To ensure the normal use of the phone, you can set the reserved space, which is 500MB by default. My space is tight, so I quickly cleaned up some cached videos I have seen.

Different image quality occupies different space, which will certainly affect the recording time. Does 1080P occupy more space than 1440P? 720P only records a little more time than 1440P? Is the code used different?

More detailed settings can be made in Advanced Settings.

The photos taken by remote control and the videos 5 seconds before and after the photos, 10 seconds in total, will be automatically downloaded to the phone.

Original photo size: 2592x1520, the original picture cannot be sent, try pressing it to 1920x1125.

The effect in the evening is satisfactory.

Original video size: 2560x1440. The compression degree of the original version after uploading is unknown.

You can hear the click sound at the middle and rear, which is the sound when you press the button to take a picture.

Photos and videos can be easily shared.

At the same time, it has more social attributes and can rank points.

4、 Summary

In the information age, everything must be connected to the Internet. With the help of a mobile phone, many objects around can share information. The large screen and powerful information processing capability of mobile phones have long become personal media centers.

The mini2 intelligent DASH CAM shows powerful interactive functions relying on mobile phones. I really feel insecure when I drive out without driving the DASH CAM. With the intelligent tachograph, there is not only a sense of security, but also many interesting scenes can be recorded.

"Lend me a pair of wise eyes. Let me see the trouble clearly

Recommended index: ★★★☆