Almost every family now has a lot of home appliances and mobile devices. As time goes by, various charging devices exist in Yibin. The lines are aging, and the configuration cannot keep up with the demand for new appliances. They often become the culprit for damaging electrical equipment and even causing fires. Now more and more devices support the standard USB charging line design, so there are a lot of charging heads in different shapes and a bunch of USB charging lines in different lengths at home. Maybe you don't have to face them like this.
However, today your charging equipment can be contracted by ORICO! So the protagonist I introduce today is the ORICO fast charging three swordsmen!
There are three boxes of different sizes in the suit, which looks really harmonious. They are five USB QC2.0 quick chargers for desktop, ORICO QC2.0 portable mobile quick charging power supply, and QC3.0 on-board charger.
Appearance
The boss ORICO 5-port USB QC2.0 fast charger has simple main parts, main body and power cord.
Gray black main color design shell, feel solid. It is necessary to use PC flame retardant material 94V0 as a charging equipment flame retardant.
A working LED light is provided above the fuselage.
The length of the power line is 1.2m, the interface design is relatively solid, and there is no obvious burr. Good quality.
Five USB output ports are provided, of which the left side is the QC2.0 fast charging port, and the color is used to distinguish the fast charging ports.
The separated 8-tail power cord is convenient to store and carry. The 100-240V wide voltage can be used worldwide by changing the power plug specification.
It supports the fast charge 2.0 protocol of Qualcomm chip devices.
Three output combinations of 5V2.4A, 9V2A and 12V1.5A are provided. The other four USB ports all support the maximum 5V2.4A output, and can automatically identify the device charging condition and match the appropriate output voltage and current.
penis This is a 10400mA QC2.0 portable mobile power supply.
Both sides of the power supply are made of PC hard plastic material, and the mirror surface is made of piano baking technology.
The fuselage is made of aerospace aluminum magnesium alloy and its surface is anodized. The chamfering process is also used, but it is not obvious because the overall spraying process is covered up. From the official information, the mobile power supply uses the LG/Samsung 2600mAhX4 battery cell, and the brand battery cell ensures quality and safety. Standard USB and support 5V2A/9V1.8A/12V1.35A automatic identification QC2.0 device adaptation output.
Third child This is the QC3.0 car charger designed by ORICO for car owners.
The shell is not made of metal, but PC+ABS (flame retardant material), reaching 94V0 fire rating.
The problem with plastic material is that it is easy to generate scratches. However, considering the use in the car, the scratches will not become the main problem of the appearance. And the plastic shell can prevent accidental leakage, right? The second child in the family is the highest for a single time.
The voltage output of DC 12V-24V matching current mainstream vehicles is basically 12V. The output of the three port USB is DC 1 * 5V3A 9V2A 12V1.5A (the USB port with orange color); 1*5V2.4A; 1 * 5V1A, total output 35W, all provide current overcurrent protection function, limit current output to ensure the safety of electricity in the vehicle. Although the third one is small, it also provides the same fast charging function as the first one. Charging mobile phones and other devices with fast charging during driving can get more lights in a short time, which can solve the urgent problem.
Function use
The use scenario of the boss is usually indoor. The five port USB can freely charge a variety of USB ports at home.
Even if all of them are used, it seems that they are much better than the previous 5 charging heads.
The desktops have been improved a lot.
Except the USB port of QC2.0, the other four USB ports all provide the same output function. After the author's simple test, the same device is inserted into these four USB ports to output voltage, and the current is almost the same.
However, the USB port of QC2.0 can be automatically recognized even if it is plugged into a device with a non fast charging specification, and acts as an output of a common USB port.
According to the actual measurement of different devices, such as mobile phones and tablets, different specifications can be output. For example, the iPhone can reach about 5V/1.35A, and the HTC mobile phone/Nokia Lumia can reach 5V/0.98A Ipad can reach about 5V/1.5A.
It takes about 3 hours to charge the iPhone 6Plus with a low charge rate of less than 10% to 100%, and with the increase of the power, ORICO will automatically output a low current of about 0.09A, without damaging the battery.
The author happens to have a speaker that supports QC2.0 fast charging technology. After testing, when the device is plugged into an ordinary USB port, the speaker cannot be charged, only the output port of QC2.0 can. So it can also prove that this QC2.0 charging port is worthy of its name!
Secondly, in terms of output voltage, as the author's test equipment supports 8V at most, the final actual voltage cannot be obtained. However, compared with other four USB ports, it can be clearly seen that the voltage of this port has been significantly increased, and the current is limited to about 1.2A. The time from low charge to full charge is about 4.5 hours.
penis The usage scenarios of the 10400 are more flexible. The portability is its biggest advantage. The 10400 can solve the problem of temporary charging whether it is travelling or mobile office.
And the single port USB automatically recognizes QC2.0 and the charging specifications of ordinary devices.
In terms of charging efficiency, after testing, it is basically the same as the boss. It takes about 2.5 hours for the iPhone to go from low power to full charge.
Here, the author has a whim that if the second child is inserted into the eldest child... Uh.. No, no, it's what happens when you connect the second child to the boss's QC2.0usb port.... What a wonderful scene is that the second child supports the input 5V 2.1A in terms of specifications, but after testing, the output voltage seems to be identified as a fast charging device. Later, the author saw the following description on the official website, so the second child should support the fast charging function. According to the official information, the second child should fill 10400 mA in about 3.5 hours, However, the actual test of the author took about 4.5 hours before it was fully charged (I charged it with the boss's QC interface! The original orico USB cable!)
Because it supports fast charging function, the author finally saw an official introduction that charging for 10 minutes（ ）, which can provide about 20% of the charging power for the iPhone.
So the author also made a test from the charging bank to charge the second child with the first child when the battery is low (unable to charge the mobile device at all). After 10 minutes, charge the iPhone to see how much power it can provide. The author thinks that when the IP6plus goes from 76% to 84%, the charging stops. According to the complete iPhone's 2910mA, 8% of the charging capacity is 226mA, which is about 140mA away from the claimed 20% of the iPhone's 362mA charging capacity.
Third child The use scenarios are limited to the car. Three USB devices are provided to power the mobile phone, navigation and tachograph, so as to maximize the use efficiency of electronic devices in the car and save space.
From the actual test, the output current and voltage of ordinary USB and QC3.0 interface meet the actual requirements.
summary
ORICO has more and more products in the charging field, and new products have appeared in the plug-in boards that support the QC protocol, USB expansion plugs, power packs, and so on. The workmanship and materials are also the highlights of ORICO.
However, the charging efficiency of the Power Bank and the promotion of providing 20% of the power of the iPhone 6 do not seem to achieve the desired effect, but it does not affect much from the actual use.
This quick charging package covers several fields necessary for home, such as travel, car, indoor, etc. Both support the QC fast charging protocol, which can quickly charge the QC fast charging equipment to meet a variety of needs. And the materials are also very real. So I think ORICO can contract all the appliances in your home!
