I am a standard man of science and technology. My usual job is to draw pictures. Of course, I also need to write some words occasionally. Like all men of science and technology, I am also a digital enthusiast. Playing games and doing photography occupy most of my spare time. Once, when the line of the community was renovated and the power supply was often cut off at home, I went downstairs to the online club (Internet cafe for short) to do a few days of mapping. Of course, I would play games after finishing the mapping. The Internet cafe was full of BenQ 32 inch monitors, which was a shocking visual effect. After a few days of close contact, 32 inch grass grew deep in my heart. When I returned home, I would watch my dual 19 screens, It doesn't look right. Finally, after a few days of ideological struggle, I married Benji BL3200PT home while there were coupons in Benji Mall, This monitor has been on the market for one and a half years and has withstood the test of the market and users, and netizens have commented it well! 。

Body:

Although I have experienced the size of the 32 inch display, I was shocked again when I received the product. The box containing the display was a little larger than the trunk door of my car. Finally, I managed to put the display in the car. I knew that it would not be sent to the unit at that time, but sent it directly to my home.

Two very thick foams are used in the inner package of the display. There are many holes and slots on the foam to hold the accessories of the display. It is recommended that you check the integrity of the outer package after receiving the electronic product. If the outer package is damaged, you must check the integrity of the product in front of the courier, especially the electronic product with a screen, because my outer package is very complete, And I'm going to take photos to commemorate this happy moment, so I took this step home.

There are many wires distributed by the monitor. In addition to the power supply, there are only 7 wires related to signal transmission, including VGA cable, DVI cable, HDMI cable, external OSD, 3.5mm audio cable, USB3.0 cable and DP cable used to connect professional equipment.

In order to provide a more reliable support for the display, the base size of the display is very large, about 38cm × 22cm. The surface of the base is brushed, and the central position is a blue circular plastic decoration. At first, I thought it was an LED breathing light, but I found that I was thinking too much. The tool free quick disassembly thumb screw is used between the base and the support arm to fix, which is relatively easy to install. Align the card hole and then rotate it, and then fix it with the thumb screw.

The material of the support arm is very thick. The silver part is made of cast iron alloy, the metal thickness reaches an astonishing 1.2cm, and the black part is made of ABS engineering plastic, and the workmanship is very excellent, which conforms to the style of BenQ, a big factory.

How big is the 32 inch monitor? Speaking with numbers, I roughly measured the outer frame. It is 74cm long, 44 cm wide, and 85.5cm diagonal. It is really a very big guy.

The upper right corner of the display is marked with the display model BL3200PT, which is BenQ's commercial professional display series. The display adopts an embedded screen design.

At the bottom of the display is a protruding window, which hides a distance sensor, a light sensor, and a power saving sensor. When the light is dark, you can see that there is a constant red light flashing in the window. That is the sensor is working. When people leave, the display will automatically detect and turn off the screen. When you return to the computer, the screen will automatically turn on, which not only saves energy and power, It can also effectively protect personal privacy. Of course, this also requires that when using the display, you should pay attention to avoiding pen holder, water cup and other things blocking the sensing window, so as not to trigger the sensor protection of the display.

Although the display frame is not super narrow, it is really small when it is placed on a 32 inch display. This is the size comparison between the display frame and a 50 cent coin. The display in the other figure is a 19 inch commercial model of Lenovo. It can be seen from the comparison that the frame of BenQ is within the acceptable range.

The back of the monitor body is designed with an independent hardware power switch. When it is not used for a long time, the user can use the hardware switch to supply power to prevent the display screen from consuming power in a long standby state. Other interfaces except the power supply are arranged in three parts according to the use frequency. The interface behind is the input interface of USB3.0 OSD controller interface, two USB2.0 interfaces, and audio input interface. At the beginning, I still felt that such a high-end display. Why are the two USB interfaces placed on the top of the display 2.0? When I actually used them, I found that the two USB interfaces are used to connect keyboard and mouse. The performance of 2.0 is enough. If USB3.0 is used, it will not improve much, but will cause waste of resources.

Two groups of commonly used interfaces are arranged on the side of the display. The signal input group is at the top, which is DP interface VGA interface, DVI and HDMI, Apple host, ordinary desktop host, mainstream video card and living room game console can be connected without pressure. Because it is a high-end display for business, VGA can also support 2560 * 1440 resolution. However, for me, there is only one HDMI interface group, and it would be perfect if there were three HDMI groups.

The most commonly used SD card slot, two USB interfaces, and headphone interfaces at the edge of the monitor. The USB interface here is 3.0, which is convenient to connect to a mobile hard disk or other storage devices. It's a pity that neither of these two groups of USB supports high current or off screen charging. It would be more convenient to add a USB interface that supports fast charging.

Those who have seen Ode to Joy must be impressed with the four monitors on Andy's desk. They were installed on a third-party bracket through the standard VESA wall mounted interface. BenQ's BL3200PT also has a VESA interface reserved on the back. When connecting with the machine's own support arm, it can be installed without screws by quickly releasing the button, When connecting a third-party display bracket, you can also use the four screws reserved for the VESA wall mount interface to fix it.

BenQ's commercial displays are basically made of black frosted plastic with silver metal support arms. This style looks strong and stable. As a high-end product of BenQ, the BL3200PT is naturally not ambiguous in terms of ergonomic design. Through its own support arm display, it can achieve four-dimensional and multi angle adjustment: 150 mm high and low lifting, horizontal rotation of 45 degrees, vertical rotation of - 5 degrees to+20 degrees, clockwise rotation of 90 degrees from horizontal screen to vertical screen. There is always an angle that can adjust the most comfortable perspective.

The small hole on the monitor base is used to place the external OSD controller of the monitor. The external OSD controller contains nine keys, and the display mode can be quickly switched through the function of customizing 1, 2, and 3.

Because I need to switch between CAD and graphics frequently, I feel it is more convenient to place the OSD controller next to the keyboard. The small hole above the base is just good enough to hold small pieces such as mechanical keyboard key puller, mobile phone card pick-up pin, U disk, and card reader.

The first thing to do after assembling the display is to check whether there are light leaks and bad spots, because 32 inches is indeed a large screen, and the most worrying problem is light leaks and unevenness. To detect whether the display leaks light, it is necessary to adjust the brightness and contrast of the display to the minimum. In addition to using the external OSD controller for adjustment, the BenQ BL3200PT can also be operated by using the control keys on the display. The control keys of the display are designed with touch, LED lights and touch keys are integrated. When the hand is close to the control key, the white LED light will light up. The function of the key will be prompted at the corresponding position on the screen. The touch sensitivity and accuracy are very high, and there is basically no misoperation.

The detection of light leakage and polarization needs to be checked in pure black in a completely dark environment. To make the effect more obvious, I compare my 19 inch brand 1000 yuan display. I really don't know the difference without comparison. I didn't expect that the display I have been using has such serious light leakage and polarization. Comparatively speaking, BenQ, which uses AMVA native panel, has a good control of light leakage and polarization. A careful look shows that there is a slight light leakage on the left side of BenQ (PS: The white dot in the red box on the left is the mouse, which is deliberately placed in the center of the screen in order to locate the display.) In fact, when the screen is large, there will inevitably be uneven backlight. BenQ's light leakage control of this display is relatively mature in the industry.

Then compare the performance of the three primary colors. This time, compare the notebook with a brand 1080P screen. The restoring ability of the three primary colors of the BenQ screen is more accurate. Red and green are very bright, while green is more transparent. Under the pure color, you can also see whether the display has defects such as dots and lines. Through the performance, it can be basically concluded that, The BenQ BL3200PT in my hand should be considered a perfect screen, without bright/dark spots, spots, wireless, and only slight light leakage.

It's really a pity that the professional monitor does not correct the color. However, it's not acceptable to ordinary users that any color calibrator can only be used for 2000 times. Even the gamers who have fever will suffer from pain. With this 2000 yuan, Mao won't buy a device, and Mao won't charge Fokirin with a 2000 yuan credit card. Here is a tip for ordinary users of professional monitors. You can rent one from a nearby computer repair shop or a treasure online. I rent it for 20 yuan a day. My suggestion about color calibration is that ordinary users and game users don't need to spend too much energy and time, but for professionals who make maps, color calibration should be carried out every 15 days or every 30 days. After the color calibration of Spider 5, it was found that the difference between before and after the color calibration of the display was not particularly obvious. It can be seen that the optimization of the display before delivery has been done very well.

It can be seen from the report of the color calibrator that the saturation of BenQ BL3200PT in the sRGB color gamut has indeed reached 100%. Although the coverage of Adobe RGB and NTSC color gamut is relatively small, compared with the full coverage of sRGB, it can completely meet the requirements of professional map revision. The display uses AMVA native panel and provides 10bit true color display, which can achieve 1.07 billion colors. The color gradient and details are clearer and sharper, especially suitable for graphic designers and photography enthusiasts. Ordinary users don't need to pay much attention to other parts of color calibration. The display has been optimized before leaving the factory and can be used immediately.

The visual angle of the display is generally not paid special attention on small size displays, but it is an important parameter on large size displays, especially for displays as large as 32 inches. Usually, we don't see the display turning or swinging head in a big way. Small size displays can be seen at a glance, but for large size displays, we are a little tired at a glance. When we look at a large display, it is inevitable to form a certain visual angle with the four corners of the display. If the visual angle of the display is too small, color deviation and color difference will occur, The viewing angle of BenQ BL3200PT is 178 degrees, and the screen can present a bright, natural and rich color effect from any angle. Although the display is for personal use, it does not need to be shared by many people like the TV, and the large viewing angle is a little wasteful, but it is better than nothing. It can be seen from different angle views that the color deviation of the screen is basically small.

In this way, the effect of visual angle is not particularly obvious. In contrast, the visual angle difference of other displays is very obvious. After the two displays tilt at the same angle, the picture of the base display only slightly darkens, and the color does not change significantly in vision. After the contrast display tilt at the same angle, except for the brightness, Visually, the color has changed significantly, red and blue almost become white.

After a simple test, I was basically satisfied with all the parameters of the BenQ BL3200PT. I immediately replaced the original dual 19 combination, but because the 32 inch screen was too large, it was absolutely a giant for a small computer table. The table I used to put the dual 19 on was 65cm wide. After I put the BenQ BL3200PT on, I could not give full play to the best advantage of the display, and because the distance was too close, The eyes will be very tired when watching the display.

In order to give full play to the display and get the best visual experience for the eyes, it is strongly recommended to put the display on a large table. A table with a width of more than 80 will have a more comfortable visual experience. This is the large table where I put the display now. Don't be surprised at this pile of displays. This is my original 19 dual screens, Now it has been completely replaced by the 32 inch BenQ.

After a few days of use, I already like BenQ's 32 inch monitor, because the 32 inch 2K monitor can display more content, which is very convenient for both work and daily use. First, look at the theoretical display effects of different sizes of displays through the WPS table. The red box and the blue box circle the display contents of 19 inch 768P and 27 inch 1080P respectively. The green box represents the display effect of the display contents. From the table, it can be found that the table of BenQ BL3200PT display has been displayed to AI * 63, with a very large visual area.

Only the theoretical data may not be particularly intuitive. Let's compare it with my 14 inch 1080P laptop. Open the same web page, and both browsers are adjusted to 100% display. The same content is only displayed to the second item on the laptop, but can be displayed to the fifth item on the BenQ display.

When we look at the comparison between the 19 inch display and BenQ, we can see more clearly the difference in the content displayed this time. The content displayed on the BenQ display of the same web page is almost twice as much as that on the 19 inch display.

If the screen is set up vertically, more web pages can be displayed, and almost all the contents of the web page can be displayed. Although the web page is very complete under the vertical screen, it is a bit tiring. I don't think people will set up the screen to simply view the web page.

In addition to a good browsing experience, the large screen has incomparable advantages in processing various documents. When using a small display to code a script, the characters on one page will be too small. When the characters are scaled to the appropriate size, only two or three paragraphs can be displayed. After changing to BenQ, the effect will be different. One screen can display 3-6 pages.

It is a nightmare experience to use small screen code script to illustrate in Word. You need to constantly switch back and forth between WORD and picture folders. After changing to this large display, you can make the folder and the script display side by side, switch the picture folder to the super large view mode, and the overall details of the picture can be displayed without switching back and forth between windows, saving time, Work efficiency has also been significantly improved.

In addition to the parallel and tiling of windows, the display can also achieve the split screen effect through the official software. For large screen displays, split screen is a very important function, especially when multitasking, if the screen interval is reasonably divided, the work efficiency will be further improved. However, this split screen is only a soft split screen, and can not display multiple input signals at the same time. If multiple signals need to be displayed at the same time, consider the 4K version BL3201 of this display.

Thanks to the 2K resolution of the display and the 32 inch large screen, while being able to experience the delicate image quality, the workspace of PhotoShop has also become larger, and all tools can be fully unfolded and displayed, without having to squeeze together any more; After the picture mode is turned on, the dark color and dark details of the picture are clearly visible without increasing the brightness of the display.

Sometimes we often take some vertical pictures, such as shooting tall buildings or portraits. If these pictures are placed in the horizontal screen mode, they may need to be fully displayed through zooming. Although the details are available after zooming, they cannot be grasped as a whole.

In fact, it is more appropriate to modify these pictures under the vertical screen. When the vertical screen needs to be displayed, as long as it is rotated 90 degrees clockwise, the image will automatically rotate with the display and fit into the screen (automatic rotation needs to be enabled in the display), and the entire portrait can be fully displayed, so that the style and details of the picture can be grasped as a whole when the picture is revised.

Because of the need of work, I often contact CAD and other drawing software. I often see complicated lines every day, and I am dazzled. One of the features of this display is that it supports CAD/CAM mode. After it is turned on, it can optimize 3D lines. After optimization, each line will become particularly clear and clear, because the screen resolution is high and the dot pitch is small, even if it is zoomed back and forth, Straight lines do not bend.

If the display effect is good or not, the arc after vector amplification will be known. If the arc is magnified by a good display, it will still be smooth, and sawtooth and fracture will appear on the low-end display. The following figure shows the effect after the original vector is magnified, and the arc still maintains a smooth transition. In fact, it is not necessary to zoom in to this size when drawing. The 32 inch display is already very large, and you can clearly see the details even with the original scale.

Similarly, when running other 3D drawing software, this displayed CAD/CAM

The mode also has a good display effect. This is a 3D model of Iron Man recently made for a friend. Designers who often do modeling should know that it takes the most time to model the face. Because there are many details of various organs, they often compare, squeeze, press, stretch and other operations.

Previously, when using 19 or 22 monitors, in order to see the lines clearly, local operations were often carried out by zooming and dragging. After replacing the 32 inch BenQ model, the vision became wider. In the CAD color display mode, the line contrast became obvious, easy to identify, and easy to operate.

Because after staring at the screen for a long time, the eyes will often appear dry, astringent, swollen, painful and other uncomfortable symptoms, which is believed to be the experience and experience of most designers. BenQ BL3200PT monitor follows the trend of the times and is equipped with a variety of eye protection technologies: no flash screen, blue light filtering, and assistant reminding. The eye protection sensor can detect environmental changes and intelligently adjust the screen brightness. No matter what brightness conditions, the screen will not flash.

In addition to not flashing eyes, the display also supports filtering blue light to protect eyes. Ordinary displays will produce blue light waves harmful to human eyes in the process of work. Blue light may cause eye damage, visual fatigue, headache and sleep disorders. Blue light filtering technology can effectively reduce the damage of the display to eyes; In addition, users can also set eye protection reminders on the display. The display will pop up every once in a while to remind people to take a break to protect their eyes.

In the display group, 32 inches is definitely a large size. The audio and video effect of this size is very good. How good is it? I personally felt that there was a gap between watching blockbusters on home TV and going to the cinema. Whether it was 1080P HD movies, Blu ray movies or 4K movies, the performance on this monitor exceeded my expectations.

The picture has high contrast, strong sense of hierarchy, and looks very transparent. The image details show well, and the color is accurate. Due to the limited shooting level, the effect may not be shown in the live picture, and the real effect of the display is really beyond expectations.

The monitor is equipped with a built-in speaker. When connected through HDMI cable, no additional audio cable is needed. The built-in speaker is enough for daily use. When the volume is turned to 80%, there will be no pop. Of course, if you really want to maximize the video and audio effects of the monitor, it is recommended to use an independent speaker. Such a good monitor is not equipped with a better speaker, so it is a bit meaningless.

Audio visual entertainment is no problem. What will happen to this monitor in the game? Can it also have a shocking effect? Try playing a race car game with the game console first. The race car game has high requirements for the response time of the screen. If the response time is too long, the display will have obvious drag. At present, the response time of the mainstream e-sports display is 1ms-3ms. The response time of BenQ's display is 4ms. Although there is a difference of 1ms, it can be seen from the game live photos, The performance of the display is very satisfactory. There is no smear, jamming, tearing, etc. during the high-speed operation of the vehicle.

The background of the game is the night drag racing on the urban road. The light on the road is not sufficient, but the game scene changes very quickly. The ordinary display is prone to the loss of dark scene details. The dark balance ability of BenQ display is also remarkable. The dynamic painting response time is 12ms, which can easily cope with the rapid changes of dark scenes, Even in dark scenes, there can be clear and bright visual effects. In the photos taken, you can see that the scene has smear, but when you really look at the display, there is no smear. The reason for the existence of smear is that the shutter speed is too low when I take photos.

Crossing the line of fire is a game I prefer to play. In my spare time, I relax myself. Previously, the monitor used to have a small field of vision. When an opponent hid behind an obstacle, he often couldn't see clearly. Since the use of BenQ, a big monitor, the basic opponent can see clearly when he flashes a little head, and directly shoot his head, The probability of head popping has increased a lot.

When playing CF without changing the base display, if my opponent hides in a dark corner, it is a dead corner for me. Now thanks to the dynamic contrast of the display of 2000000000:1, I can see the enemy squatting in the corner at a long distance, and it is cool to shoot his head without hesitation. Among other things, just talk about the reality of the game scene. Look at the clouds in the sky, they are very realistic, so this display is enough to meet the game needs of E-sports players.

Similarly, in LOL, the 3D effect of the game screen is also very excellent. Whether it is a magnifying move or a show skill, the visual effect brought by BenQ BL3200PT is absolutely more than shock.

Summary:

Through the previous experience, I believe you can clearly feel that BenQ display has excellent performance in video, office, entertainment, games, design and other aspects, and the display also has a lot of highlight functions, but the most striking feature of these highlights is the ability to switch display modes and flexible brackets with one button, The external OSD button can easily and quickly switch between various modes. Friends who often do design can experience the CAD/CAM mode of this display, which is really a blessing for the design dog. The product flexible bracket can rise and fall and rotate at multiple angles, and can always find a very convenient angle.

Of course, I don't deny other advantages of the display, such as 32 inch 2560 * 1440 ultra-high resolution, 100% sRGB standard color display, 10bit panel, eye protection and light sensitivity design DP high-definition digital output interface, blue light filter, smart support, intelligent split screen, etc., any of these parameters or functions are very practical. The product's function, appearance design, application effect experience and color are excellent. It can be sure that BenQ BL3200PT display is not only in the field of office displays Both the commercial display field and the e-sports field are very competitive.

Insufficient:

Of course, at present, this monitor has some shortcomings. For example, although VGA interface, DVI interface, HDMI interface, and DP interface are not missing, the number of HDMI interfaces is too small, and there is only one set. I hope that a model with three sets of HDMI interfaces can be produced in the future, so that the game console and smart box can be connected to the display. Moreover, the monitor lacks a level gauge, which always feels uneven after adjustment. Of course, it would be more perfect if the monitor could add a set of USB interfaces that can be charged with large current.