Deliver the original intention and carry happiness - Mornisibi HD-M1 evaluation
Deliver the original intention and carry happiness - Mornisibi HD-M1 evaluation


Monici M1 is a young earphone. The reason why it is young is that it is specially designed for young people. Many patented technologies are developed for young people. Of course, there are some flaws in it, which also reflects its immaturity. The design of this Munici M1 headset is very thoughtful. Lightness and comfort are my first feelings about it. Incompatibility of some hardware devices is its hard injury.

Basic parameters

Mornisibi HD-M1 adopts two drive units with a diameter of 40mm, impedance of 32 Ω, frequency response of 20Hz - 20000Hz, frequency response range of 15Hz - 2000Hz, total harmonic distortion<0.5%, headphone sensitivity of 113db ± 3db, plug type of 3.5mm straight plug, weight of 260g, wire length of 120cm, wire material of ofc oxygen free copper, protein fiber leather, and the use of neodymium iron boron magnet with an overall dimension of 196 * 168mm, The sound generation with polyester diaphragm and high-purity oxygen free copper wire are all designed to please the listeners so that the sound can be more clearly presented in terms of listening and output.

The brand culture of Monitsibi is to build a brand culture opposite to luxury. Monitsibi HD-M1 is a product that allows people to find their original intention to share happiness. From its packaging, it can also be seen that Moni Sibi HD-M1 is another kind of white paper box packaging, simple but not simple. The prominent Moni Sibi logo is printed in the center, and the back is printed with the basic information, parameters, functions and materials of the product in four languages.

The blue ribbon on the side is very special. It seems that I have seen it somewhere.

Open the upper cover and you can see the earphones with blue ribbons, The whole hard paper shell is wrapped independently. It seems that the design team has put a lot of thought into packaging. The use of this kind of mani belt can play an external impact and extrusion. The mani belt adopts a magnetic suction design, which is convenient and practical. When the mani belt is opened, it is a long belt. It is relatively new, but I personally feel a bit cumbersome. I can't imagine when I will use the mani belt, but it is better to have one than not.

The bottom is the product manual and climbing buckle.

I was surprised to open the package of the manual. It was designed to look like a postcard. Besides, it introduced the use of the headset and its differences with pictures and text. Like one!

To be honest, I still haven't figured out what the purpose of the attached climbing buckle is, whether it is to let me hang the headset on my backpack or not Menethibi wants to convey to the messenger that this earphone can accompany you on a long journey?

When I saw this special blue ribbon again, I suddenly remembered that the fan belt for AIDS prevention looks like it. Is it suspected of infringement?

The earmuffs are of high quality because they need to contact with the skin for a long time Protein fiber leather The earphone has good air permeability. Breathability is not enough, and comfort is also important when wearing, so slow rebound inert cotton is selected when selecting fillers.

In order to adapt to the human head curve, Mornisibi created a straight column circular shaft knife direction rotation structure, which makes the earphone and ear always at the optimal angle, reduces the pressure caused by long wearing, and fits the earmuff on the ear in the most comfortable way. The use of this patented technology has just solved the problem of the headphone being picky about the head. In terms of my long wearing experience, I don't feel uncomfortable, and the comfort is really high.

The side blue and black color matching design makes Moneys and nuns are more dynamic than ever, which is also in line with the mentality of young people who like to show their individuality. When they are young, they must be different, and when they are young, they must show their individuality! The brand and model stand out in the eyes, so that everyone can remember this earphone at a glance.

The earphone is made of ABS plastic and austenitic 304 steel. The outer layer is coated with rubber fiber matt paint, similar to the surface of many mice. It feels good. The "M" hollow design outside is very personalized, but I'm worried about whether this position will be dusty and difficult to clean. I hope not

The workmanship in these details is quite good.

Mornisibi gave up the replacement of two lines and developed a line version that is compatible with IOS and Android systems. At the same time, an innovative way has also been found for the microphone, which can be freely loaded and unloaded according to different needs, making it more convenient to talk and less cumbersome to carry. For the design of wire control, the R&D team can also say that it is ingenious to design the wire control to be detachable. Although I rarely install the wire control on the body, I should give affirmation to this idea. Games, phone calls, music, and communication have all become the stage where Mornisi shines more brightly than M1. In my actual experience, I found that Monetil's compatibility with Android system was not enough. During OPPO R9 experience, the volume reduction button failed, and only the volume could be increased and paused. When using millet NOTE experience, invalid situations often occurred. For a new product, this will be fatal.

Sound quality experience

Mornisibi HD-M1 The sound quality of low-end earphones is already excellent. Relatively speaking, the mid frequency should be more excellent. The mid frequency is slightly brighter than the low frequency. What is more satisfying is that the vocal performance is relatively loose and natural. The distance between the voices is moderate, just a little close to the face. The rendering is not too much, and sometimes the overall feeling is a little cold. The performance of female voice with sweet and bright voice needs to be improved. The heating that should be brought by sweet and greasy voice Mornisibi HD-M1 In the performance of, they all disappear quietly like air, but it's not that the sound is bad, just that there is no taste that should be.

The low-frequency texture and diving are relatively slow, and the transient response and density sense are relatively general. In most cases Mornisibi HD-M1 The low frequency has a soft taste. Mornisibi HD-M1 There is almost no obvious feeling in the high frequency of the violin. It lacks overtones, and its extension is relatively ordinary. The transparency is OK. The high frequency restoration is not accurate enough. In particular, the sound of instruments such as the violin is not exactly what it should be under the interpretation of Mornisibi HD-M1. Although it is not unpleasant, it depends on your own needs. If you need the sound of all frequencies to be restored accurately, Mornisibi HD-M1 Not suitable, but if you like voice and popularity, and are interested in mid-range, just to find a headset with good quality, Mornisibi HD-M1 The cost performance ratio can reach a very strange high level.

Monici is more careful than the HD-M1 design, which is obvious to everyone, but the problem of workmanship is unforgivable. The product I experienced found this at the magnetic buckle of the mani belt. Who can explain this? A complimentary gift? For wool! It may also hurt people and hands. It's too unexpected. In an instant, ten thousand alpacas passed by, silently blessing you.

There are serious scratches on the metal. Which OEM factory did it? This batch of products should be returned to the factory. I always have a very high tolerance for new products, but this Moni is more extreme than HD-M1, which makes people love and hate it. Hope that the quality of the next generation products can be improved.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is the second time to evaluate this earphone. The manufacturer sent me an engineering machine in order to rush the product development department and publicity, and admitted that there were some problems in product workmanship and quality, so they sent me another finished product. I want to give a big praise to the manufacturer of Moni Sibi! Not only admitted the problem, but also tried to make up for it. This is the second time I have met such a business. However, there are few businessmen who are willing to admit their mistakes and mistakes, but more are prevarications and excuses. In this case, the public relations crisis of the business is handled in a timely manner and in place. This attitude will make the business bigger and stronger.

There are a lot of extraneous remarks, the transfer text. In the previous evaluation, I made a serious complaint about this product. First, compare it with the following work:

Last time, the metal wires and internal components in the gap of the earphone can be clearly seen

The secondary product has obviously improved this problem

The details of the last product were rough

The workmanship of the secondary products has improved significantly, but the edges of the plastic are too sharp, which is easy to hurt girls' delicate hands

The last time the volume button of the product was increased, it was obviously biased to one side

The workmanship of the volume key of the secondary product has been improved, but the right side of the pause key still It is sunken and has obvious gaps. There is still room for improvement in the workmanship here.

The M design is also easy to leave a hidden danger of hurting hands. Although it doesn't hurt me, it's also bad to hurt others. Please remind the merchants.

In terms of sound quality, I received the goods late, so the first time I turned on the machine. It may be that the first time the product didn't have enough time to cook. The sound quality just feels OK, which is reasonable. This time I spent five days, at least 70 hours on the machine. However, I don't think there is much improvement, but I can dive faster and deeper in the low-frequency part, which is really slightly improved than the last product. The middle frequency is basically the same as the high frequency. It seems that this earphone is more suitable for use as a bass earphone. None of the earphones with a price of about 1000 yuan can be suitable for high, medium and low frequencies, so the earphones at this price have performed well.

Finally, I'll show you my Iron Triangle and Magic Sound. I won't be annoying to compare them with those two earphones with Mornisibi. After all, the price is far from the same. I prefer my red triangle.

Share:
The article on the trial of iGo is completed by netizens, which does not represent the views of this website.
ordinary
I always have insomnia recently. I wake up every 16 hours
Share Weibo Share WeChat
 Aigoji WeChat

Aigoji WeChat

 WeChat

WeChat

Recommended products

Sorry, the product you are looking for is not available in the product library

on trial