I Unpacking
II on trial
III summary
First of all, I would like to thank Lei Feng's trial website and Crazybaby team for giving the author the opportunity to try this very compelling product.
1、 Unpacking
Mars The packaging of is not one of the most distinctive packaging of similar products that I have been exposed to. When I opened the box, I was attracted by her "black dress", which gave me a mysterious and noble feeling. There are no redundant words and icons on the matte black box, and the arrangement of six sides cannot be simpler. Mars' 3D picture and LOGO seem to be carved on the box. The whole package is designed to be exquisite and overbearing, eye-catching.
Mars The package of the speaker is multi-layer nested design. When the box cover is lifted up, the nested inner box will slowly fall, and the bottom Mars Base ™ The base of the subwoofer is the first to "grab the camera". The internal packaging is made of shock absorption sponge.
The overall dimension of the box is 220 * 220 * 445mm, which is a cuboid with a square sectional area.
The top of the packing box is pasted with the LOGO of Lei Feng's trial website
The front and back sides of the box are Mars' 3D graphics
The left and right sides of the box are Mars' LOGO
Top view of box top
Bottom of box
Unpacking steps: 1. Place the box vertically on the table, and pay attention not to invert it from top to bottom; 2. Slowly lift the "box cover" upward, and note that there are still parts in the cover. At the moment when the lid is detached, hold the lower edge of the lid that is about to leave with your hand. 3. Put the box cover aside gently (preferably vertically), and take out the Mars Base ™ After the subwoofer base, take out the remaining parts in the box cover (Frisbee shaped surround sound).
After unpacking to this point, the author found a problem, that is, there was no prompt outside the box, and there was a "tunnel mechanism" hidden in the box cover with important parts (flying saucer shaped surround sound). The author found that there was no flying saucer shaped surround sound at the end of unpacking and searched everywhere, only to find the "tunnel mechanism" in the box cover. In spite of this, the flying saucer shaped surround sound still fell to the ground due to the lack of understanding of the inside of the cover when picking up the flying saucer shaped surround sound. Fortunately, it was not a big problem. It is recommended to add stickers for easy removal at the eye-catching places outside the box to remind that there are still parts in the box cover and the removal method.
Now continue the unpacking procedure just now, and take out Mars Base first ™ Subwoofer base part.
After the box cover is removed, a beautiful cylindrical speaker "reveals the true face of Mount Lushan". It was quietly lying in the special black shock absorption sponge base, motionless and well protected.
Lei Feng tried to paste the sticker on the Mars column conspicuously
Subwoofer and base bracket
The bottom bracket is composed of two layers. The upper layer of black shock absorption sponge is taken out, and a square groove is found in the middle of the lower layer. There is black paper packaging in the groove.
The object in the groove is marked with a striking logo of Mars. After careful inspection, it turned out to be an envelope like document bag. In order to take it out of the groove, the designer specially arranged a "small handle" on the file bag, which is very user-friendly.
The author holds the small handle and takes out the document bag conveniently.
Take out the document bag, and there is a square paper box with a round hole in the middle underneath.
The author hooks the round hole with his hand to take out the carton very conveniently. The round hole is designed to facilitate people to take out the objects in the groove.
Open the two boxes and flatten the document bag. There are black "Quick Start Guide" and white "Safe Use Information Guide", two pamphlets, one black and one white. Even this detail has been considered so carefully, the author sincerely praised the designer.
The thicker box contains a power adapter for audio power supply. The output power is 24W (12V/2A).
The true maglev Hi Fi wireless speaker system is composed of a UFO spaceship shaped Mars Craft ™ 360 ° surround sound and Mars Base ™ Subwoofer base. Mars Base is the first one to "compete for favor" ™ Subwoofer base.
Mars Base ™ The base of the subwoofer is a cylinder with a diameter of 153mm and a height of 235mm. Its main body is made of aviation grade aluminum alloy. The chemical collision of aluminum, magnesium, silicon and zinc is elegant and solid. The space gray fuselage has undergone exquisite anodizing treatment, which makes the color pleasing and elegant, highlighting the low-key connotation. Accompanied by the saucy luxury car race polishing treatment, it is unforgettable.
Mars Base ™ Top surface of subwoofer base
Mars Base ™ Bottom surface of subwoofer base
Mars There are three colors: white, black and deep space gray. The author tried dark space gray
Next, continue unpacking:
As mentioned above, the packaging of Mars speakers is designed for multi-layer nesting. When the box cover is lifted up, the nesting part will slowly decline, and the Mars Base will be exposed first ™ Subwoofer base, and then the UFO spaceship shaped Mars Craft nested on the top of the box cover should be lowered slowly ™ 360 ° surround sound. But this did not happen when the author opened the box. In addition, without any prompt or explanation, the author mistakenly believed that there was nothing in the box cover, and there was a small accident. These have been mentioned above, so I will not repeat them.
In order to take out the frisbee shaped surround sound nested in the box cover, the author started by standing the box cover mouth down vertically on the table and gently tapping the top of the box cover, hoping that the nested "frisbee" could slowly fall down. It may be that the nested part is bitten tightly and failed. The author had to lay the box cover flat on the table, reach into the box and carefully pull out the box bit by bit.
The sleeve box is exposed a little
Most of the casing is exposed
The box is separated from the box cover
Take out the sleeve box
It was not easy to take out the box, and found that the "flying saucer" was no longer in its original position. The author accidentally slipped the "flying saucer" to the ground, but fortunately it was not a big problem. Although it was an accident, it could not be said that it had nothing to do with the unreasonable design of the packaging.
The box design is exquisite and beautiful
Restore the status of the sleeve box in the box cover
Internal condition of the case
Mars Craft ™ 360 ° Surround Audio Top View
Mars Craft ™ 360 ° Surround Sound Bottom View
The above figure is an important part of Mars - Mars Craft in the shape of UFO spaceship ™ 360 ° surround sound. The diameter is 122mm, the height is 38.5mm, and the weight is 362g.
Mars= UFO Mars Craft in the shape of spaceship ™ 360 ° surround sound+Mars Base ™ Subwoofer base
Now the author concludes the open box article by looking at the pictures and talking.
II , Trial
Before trying Mars, the author suggests: First, read the [Quick Start Guide] carefully; Second, fully charge Mars UFO and Mars base. The third is to download and install crazybaby app using mobile phone (or tablet).
one Read [Quick Start Guide]
two , Charging
Mars Charging
The flying saucer LED indicator is breathing during charging
Mars Charging of the base: when the working indicator flashes red, it means that the power of the base is less than 10%, and the power adapter must be plugged in immediately for charging.
Mars UFO charging: There are two charging modes. One is manual charging. Place the Mars Frisbee on the base, and align the bottom groove with the center point of the base. At this time, if the power supply of the base is turned on and the power is more than 20%, or the base has connected the adapter, the base will charge the Frisbee. The second is automatic charging. When the power of the suspended UFO is lower than 10%, the UFO will automatically land on the base for charging.
When the flying saucer LED indicator shows the status of breathing light, it indicates that the flying saucer is charging. The breathing light goes out, indicating that the UFO is fully charged.
In order to shorten the charging time and improve the charging efficiency, it is better to turn off the power supply of the chassis when charging the chassis and UFO.
three . Download and install APP
It is very simple to download and install the crazybaby app. Scan the QR code of the crazybaby app in the [Quick Start Guide] with your mobile phone (or tablet), download and install it, or go to the App Store (ios operating system), Google play (Android system) to search for the crazybaby download and installation.
The author chooses to scan the crazybaby App QR code in the [Quick Start Guide] to download and install crazybaby+.
Download and install crazybaby successfully, and the crazybaby icon appears on the mobile phone desktop (yellow circle).
three , Connection
To make Mars play music normally, first connect the UFO with the mobile phone through Bluetooth. The specific operations are as follows:
one . Press the UFO power button briefly to start the UFO;
two . Press and hold the power button for about 1 second, and release the button after one light strip lights up;
three The LED indicator on the edge of the UFO flashes, and the UFO starts to search for Bluetooth devices;
four . Open the mobile phone crazybaby App, and connect Mars to the mobile phone via Bluetooth as prompted;
Connect Mars to your phone via Bluetooth
The rotation of the flying saucer LED indicates that the connection is successful. At this time, Mars can play music or other programs on his mobile phone or tablet.
four , levitation
If the UFO is suspended, it must be successfully connected to the mobile phone or tablet. Place the UFO on the base, and align the bottom groove with the UFO center point. Press the power button of Mars base, wait a moment, the flying saucer starts to rise, and the suspension indicator light of the base flashes slowly. When the flying saucer finishes levitation, the levitation indicator stops flashing and remains on.
Press the Mars sled power button
UFO levitates
When the flying saucer is suspended, the suspension indicator remains on
five Stereo pairing
UFO A and UFO B need to be paired
① Short press the power button, first start UFO A, then start UFO B;
② Press and hold the power button of UFO A for a long time, and release the 3 light strips after they are on; Then long press the power button of UFO B, and release the four light strips after they are on, waiting for the two UFOs to complete pairing;
③ The indicator light rotates and the two UFOs are paired successfully;
④ Press and hold the power button of UFO A for about 1 second, and then release the button;
⑤ Open your phone's crazybaby App, and connect Mars to your phone via Bluetooth as prompted;
⑥ Select stereo left/right frequency division or double sound effect mode in crazybaby App.
Select stereo left/right frequency division mode
Select double sound mode
Strong shock 2.1 Stereo music reverberates in the living room
six Use the crazybaby App to control Mars
① Double click the crazybaby App icon on the phone;
② crazybaby App Main functions:
crazybaby App major function
③ Levitation control
As shown above on the right, the hovering height of the flying saucer can be changed within the range of 0-20 mm by moving your fingers up and down (see the figure below).
④ Number of light strips
Use your fingers to draw the right picture left and right to change the number of UFO light strips. Draw to the left, and the light strips change from 1 to 4 one by one (see the figure below).
⑤ Light band brightness
When you use your finger to stroke right, the light strip turns on, and when you stroke left, the light strip turns dark.
⑥ EQ
Mars It can be set as basic, indoor, outdoor, EQ and other sound effects
⑦ Auto Volume
⑧ Equipment name
The author named two Mars A and B respectively
⑨ Dual sound effect
⑩ Multipoint connection
eleven Firmware information
seven Other functions:
① Charger function
Mars Can charge two mobile phones or Pads at the same time
② Handsfree telephone function
As with general Bluetooth speakers, when a phone calls while the speaker is playing music, the music will pause and the phone will automatically be connected in a hands-free manner. When the call ends, the music resumes playing.
Bluetooth hands-free call function
③ Portable Bluetooth speaker
UFO can be used alone as a Bluetooth speaker. Relying on its strong magnetism, it can be tightly attached to any magnetic object, such as bicycles, refrigerators and other related parts. This design arrangement is very imaginative and magical.
The flying saucer is firmly attached to the refrigerator, and music floats out of the flying saucer sound cavity
3、 Summary
crazybaby Mars Maglev speakers. The world's first true maglev Hi Fi wireless speaker system consists of Mars Craft 360 ° surround sound in the shape of UFO spaceship and Mars Base ™ Subwoofer base. Equipped with CSRaptX decoder, the sound of freedom can be restored without loss.
one 、 Cool appearance, aviation grade material:
two The world's first magical suspension technology:
three , dual speaker combination, Tianzao sum:
four , Omnidirectional handsfree call:
five Suggestions:
① Packaging needs to be improved. Although Mars' packaging has been very brilliant, the success rate of UFOs slipping out of the box naturally does not reach 100%, which is the case for the author. We can't find where the UFO is installed. There is no prompt outside the box, which brings confusion to users.
② Use your mobile phone to remotely close the UFO and the base. During the trial period, the author encountered that after the UFO stopped playing music, it did not turn off automatically for three hours (the LED indicator light was always on); Each time the user turns off the power of the flying saucer, he needs to take the flying saucer. After turning off the power, he needs to put it back into the base. It is also troublesome to align the central groove. It is also troublesome to turn off the power of the chassis every time. Usually, the side of the power button of the base is facing the wall. To turn off the power of the base, you need to fumble and press the power button.
③ It is troublesome to pair two flying saucers. The author tried to experience two Mars, but paired the two Mars according to the method introduced in the introduction guide. The operation failed several times. The problem is that it is difficult to determine whether the UFO ribbon is three or four segments bright, which is totally intuitive.
As the first product of Crazybaby, Mars is responsible for shaping the brand image. Allen, the leader of Crazybaby's team, said that in the pursuit of a certain sound quality, Crazybaby's product positioning is high-end people, and its design will pay more attention to the sense of the future.
Crazybaby The team has both the creativity of flying horses and the pride of riding horses. We expect them to bring more and better products with a sense of technology, future and mystery to people.
(End of full text)
