The hard disk can be directly inserted into the base without installing a hard disk box. The device is connected to the power supply. When the computer works normally, the USB or SATA interface can be connected at last; Windows 2000/XP/Vista and Mac OS operating systems, when using the SATA interface, have the same performance as the built-in hard disk, realize high-speed data transmission, and have an independent power switch, which is convenient and reliable; Plug and play is convenient for operation, and any 2.5/3.5 SATA hard disk can be replaced at any time without tedious disassembly and assembly.

With the advent of the era of mass storage, hard disks previously measured by G have been purchased by T, and the overwhelming video and big data have invaded our storage, so the system expansion is unstoppable. However, some materials can not be backed up several times a year, so it is impossible to install 5-6 hard disks in the computer. Therefore, a device called "hard disk base" came into being, which can not only realize the regular backup of materials, but also serve as an alternative supplement to the capacity of computer hard disks. At the same time, it also takes into account the function of data cloning and backup of dual hard disks, Let's get closer to this device.

▲ The green paper box and white envelope continue the packaging style of ORICO products.
▲ Today we are going to experience the hard disk base product with the model of 6629US3-C-V1-BK.
▲ Removing the envelope is Orico's logo.
▲ When the box cover is opened, the black product body is revealed. In fact, the BK in the model can also be seen as a black product.
▲ Take out the hard disk base, the right side is the power supply, and the lower side is the instruction manual, which is separated by the environmental protection hard paper shell.

▲ A USB 3.0 data line is standard for the family photo.

▲ The instructions are printed in full color, with pictures and texts, which is quite concise and clear.
▲ The power adapter is 100-240V input and 12V/3A output.
▲ Eight tail power line is adopted.
▲ Let's take a look at the product body. It is black all over and has the logo of ORICO on the front.
▲ "PC-CLONE" change-over switch, "SRART" start key, "USB3.0" data interface, "DC" power interface and "on key" are on the back at one time.
▲ The bottom is the product nameplate information, and the four corners are equipped with anti-skid rubber pads.
▲ In case of such small problems, quality control should be strengthened.
▲ From the top, the upper and lower two drawers, 2.5-inch and 3.5-inch hard disks can be used universally. At the same time, the design of dual drawers can also facilitate data cloning between hard disks. The left side is marked with Target and Source, and the lower percentage indicator is the progress indicator of cloning. On the right is the indicator light when the PC is connected.
▲ Spring flip design, when using a 3.5 inch hard disk, it needs to press hard.
▲ When inserting 2.5 inch hard disk, only use the designed reserved port.
▲ Is it beautiful with the special hard disk protection box of ORICO? The color of the hard disk box makes me a little disgusted.
▲ Hard disk specially customized for ORICO purchased together.


▲ Insert two hard disks at the same time, which is quite aggressive.

Data analysis:

Here, CrystalDiskMark_5.1.0 and HD Tune Pro v5.0 Professional are used for comparative analysis, as shown in the following figure:

3T hard disk shall be tested with 1.5m USB3.0 data cable (self configured).

3T hard disk should use the test data of USB3.0 data cable attached with the machine. If there are no special circumstances, it is better to use the random short cable.

Test data of SanDisk 128G SSD hard disk inside the system.

---===over===---