preface:

As a person who likes to do something, he doesn't do something occasionally. It seems that he will feel itchy after a long time. Therefore, he should be kind to himself. Whenever he has fresh products, he can consider doing some hand exercises. Cough, don't think it's crooked. Of course, it means playing with the machine.

However, as a hands-on person, there are several things that must be done in advance to prevent accidents, specifically: dismantling and scrapping cannot be used. Would you be willing to disassemble and make the new machine unusable? Of course not, and will not let the accident happen. So we should achieve three no injuries: Well, yes, the term commonly used in safety production: three no injuries. What do you mean here? First, do not hurt yourself. Be careful when using screwdriver, knife, tweezers, clips and other tools; The second is not to damage the appearance. The machine is its own and needs to be used. If the disassembly results in a damaged and unsightly appearance, it is very disturbing for obsessive-compulsive disorder; The third is not to hurt the inside. Haha, if the product is damaged, it will be scrapped. Why should you give yourself money?. Of course, the most important thing is that you should be bold and careful. After you have taken all kinds of emergency response measures, start work.

Reminders for disassembly: First, if you are disassembling the mobile phone for the first time, you should first prepare all kinds of tools to prevent the disassembly from reaching the halfway point in the process. It is very uncomfortable to continue without suitable tools; 2、 You can take photos of each step to remind you what the steps are when you replace them; 3、 Be bold and careful. If you don't know what to do next, you should learn and look at other people's methods and steps. Calm down, calm down, and see if there is anything missing that has not been disassembled; 4、 In a word, if you dare to do something, you should dare to bear it, hey hey!  

Today's protagonist is vivo X6. As a machine that is "fast enough to be happy", the shock brought by X6 when it was released really impressed many people. Fingerprint identification is fast enough, photography is fast enough, 4G memory is fast enough OK， What about other configurations? It is matched with 2.5D Curved glass and metal account for 98.3% of the whole metal integrated fuselage design. It is also equipped with 4G super large storage as the hardware foundation of "Happy". It is equipped with Funtouch OS 2.5, which has more than 30 smoothness optimizations. It supports split screen multi tasks such as watching video and chatting QQ on the same screen, and built-in screen out unlocking is only 0.4 seconds The 360 degree fast press fingerprint recognition that only 0.2 seconds after the screen is lit and unlocked supports Alipay and WeChat fingerprint payment. At the same time, the rear camera that uses the PDAF phase focusing and fast tracking and dragging function with the focusing speed of 0.1 seconds is used. By the way, it also has the dual engine flash charge independently developed by vivo, which can have twice the charging speed. How about the internal structure of such a product? Is it consistent with Vivo's consistent process standards and workmanship? As a restless person, it is necessary to take everyone to solve the mystery of "being happy only when you are happy".

Personally, the 5.2 inch screen is the product I would like to hold most. The screen is too small, which will affect the reading and use perception. It is too large, and it is inconvenient to operate with one hand. Compared with other sizes, I prefer to use the 5.2 inch screen. The all metal body makes the holding process appear calm and feel good, and it is easy to operate with one hand, The quick response of fingerprint recognition, the system based on the Fontouch OS 2.5 version, and the support of 4G memory make the operation smooth without jamming, which is very suitable for heavy mobile phone users.

Well, before each disassembly, there must be a saying: "If a worker wants to do his job well, he must first sharpen his tools". All kinds of disassembly tools must be prepared. When these tools are ready, they can lay a good foundation for starting.

Before starting, you need to remove the SIM card slot, which is still the traditional AND or card holder. After taking it out, you can proceed to the next step.

The disassembly is relatively simple. Remove the two screws at the bottom, pull the screen with the suction pull ring, and insert the gap with the extractor scribe when there is a gap, and then move it gently. Note: In addition to two screws, the X6 is locked with buckles. Be careful not to break the buckles.

After disassembly, because the back cover only has one fingerprint identification module function, it does not affect the switch on and other uses, but it is less fingerprint identification. However, if the X6 back cover does not have a fingerprint identification module, it will be easier to disassemble. Now it is just one more step. Be careful not to touch the module. In fact, from this point of view, the X6 is very thick. The black part of the back cover is conductive graphite, and the signal overflow band at the upper and lower parts is also very neat. The internal structure is very neat. I believe that Vivo's quality control is very strict.

The back cover and the body are separated. Do you want to continue working?

From the photos, the internal structure layout is very neat and regular. The battery compartment takes up a lot of space, but it doesn't matter. The space in the front and rear parts is used very well. The main board and the small modules are very harmonious and well connected.

Two screws are added at the bottom tail plug part to stabilize the poor contact and other problems caused by long-term use of the charging port.

The rear 1300W pixel camera is its eye.

We should talk about the internal layout and structure. In order to make the product more safe and reliable, many of its flat cable connections are equipped with metal covers and fixed with screws to stabilize the flat cable contact; The black part is still a graphite heat conduction sheet, which is conducive to heat dissipation and packaging the temperature of the metal fuselage.

At the bottom of the fuselage, after unscrewing several screws, you can see the internal structure. You can see the cleanliness of internal workmanship and parts.

Be careful not to break the RF antenna signal line.

The details are true. Even the fixed steel sheet is covered with graphite heat conduction sheet, which can be described as conscience work.

During the disassembly process, the key point is to protect the connecting plate. Be careful when pulling and inserting, and operate after accurate alignment. The most impressive thing is the application of metal shielding cover. The main board is almost completely covered, and the metal cover is also attached with a layer of copper foil, which is more conducive to heat dissipation.

In order to facilitate the disassembly of the battery, a prompt bar is provided in the battery compartment. According to the prompt, the battery can be easily removed. Compared with the way that the X5PRO is directly stuck with the backing glue, this way of fixing the battery is more user-friendly.

The battery has a capacity of 2400 mA and a nominal voltage of 3.8 V. The thickness of the battery can be seen. The production date is after November 30.

Side power on button and volume increase/decrease button

receiver

Rear camera

This is why I want to say that the reason for incomplete disassembly is that all the hardware on the motherboard is covered by the shield and welded evenly. In order to use the product better, I did not further disassemble the shield and check the specific results inside, because the hardware configuration has given detailed answers at the press conference.

Untie the copper foil, and you can proceed to the next step of disassembly, ha ha.

This is the dismantling of family photos.

The metal back cover of the vivo X6 adopts the nano injection molding process. It can be seen that there is a circle of plastic snaps on the inside. However, it is difficult to disassemble the metal frame in the rear shell. Unscrew the four screws of the fingerprint identification module to remove the fingerprint identification module. In order to avoid the problem of insecure connection caused by fingerprint pressing in actual use, it uses a locking plate for fixation, and for safety, there is foam material between the fixed steel plate and the main board. In general, the design process and standards meet the consistent quality control requirements of Vivo.  

Ladies and gentlemen, look at the time. It was more than 23:00 when the machine was disassembled, but now it is more than 1:00. So the disassembly is successful. Haha, don't worry about the machine being broken.

The assembly is very simple. It can be replaced step by step according to the disassembly sequence.

OK， Restore to the original state.

last:

For the disassembly of vivo machines, we have completed the disassembly of X5 Max, X5Pro, X6 and other machines. Every time we disassemble the machine, we can learn new things. We have a good understanding of the product structure layout, internal component layout, process design, quality control, etc. Vivo takes every step seriously, which is the best thing for users.

This time when the vivo X6 was disassembled, we could feel the improvement of the product's workmanship. In particular, there were many highlights in the internal quality control and layout of the fuselage. The addition of the new shielding cover and various heat conduction materials made the heat conduction design achieve better results; In fact, for Vivo, the positioning of its various series of products is becoming more and more accurate, responding to different groups. The breadth of offline channels and the strong insertion of various types of advertising will make you feel more and more ubiquitous.