Last year, there were many more scientific and technological products for the science and technology circle. With the continuous understanding of VR devices in the market, this year VR tends to the edge of the outbreak point. Sony and Samsung, both have their own products. As domestic manufacturers Pico Bird, they also produced a product Pico1 on the eve of the VR outbreak. As a new product, whether his experience is good enough will determine the future market.

The unpacking photo shows that the appearance is bumpy, but it's normal. The express delivery is very violent,

Open the packing box. The glasses are protected with sponge. The proper ones contain a new year card worth 120 yuan. There is also a piece of lens cloth in the package. I don't know whether it is a trial. There is only one helmet belt, but there is no helmet belt on the top.

Pico1 adopts COP material lens, with a luminous rate of 92% and a horizontal field angle of 96, making it more transparent, lighter and thinner;

The helmet belt here is not secure with adhesive tape. After several times of use, the glue has already been opened. This should be noted after production. It is better to sew it with traditional technology.

The faux leather material is used properly and very considerate

Adjust the distance from the lens to the glasses. The image can be clearly seen at an appropriate distance. The plus and minus signs are easier to identify.

On key, Bluetooth light is beside

Touch the plus/minus key

Plus minus sign to adjust the volume

Mobile phone compartment tray can adapt to mobile phones between 4-6 inches. Large screen high-resolution mobile phones are more suitable for VR devices

I have prepared two mobile phones, one Xiaomi and the other Huawei, 4.7 inch and 5.5 inch respectively

Put the phone in the phone compartment

There is an adjustable ruler that can be pushed upward to limit the position of the phone

There is hard cotton at the back of the phone compartment, which can hold the phone down

The blue limit ruler line should be aligned to the center. The effect will be the best. Small phones are not easy to align, while large phones are easy to align.

Effect after treatment

After opening, the VR interface will appear, with a red background. With the gyroscope, you can see 360 °, but as long as there is a display in one direction

I have seen many movies and games. There are many blockbusters and games. The blockbusters can be viewed online, but they are slow. It is recommended to download them to watch. The games also need to be downloaded.

The color will change after Bluetooth link,

The nose does not fit the face very well, which leads to the result that there is breath on the lens The distance sensor, when taken off, stops the film, and continues to play after wearing it, which is very considerate design.

There is a lot of dust inside the lens. The front panel is closed and cannot be cleaned. If you pull the phone compartment, dust will be brought in. Does the manufacturer have a solution.

The veneer material can be removed and replaced, which is very creative

There is no locking device in the mobile phone compartment. You can shake your head when playing games. The mobile phone you put in is easy to fall out,

It was easy to slip out,

Finally, the headset empty and charging port,

Next, the content movie part of APP

Game part To sum up, because it is an immersive experience, you will get dizzy and other symptoms if you wear it for too long. It seems that all VR devices now have this problem. In order to catch users, you must work hard on content. Pico 1 has already started to do so. As a new product in the VR industry, I hope it can occupy a larger market in the future.