Internet companies rely on wireless routing to game the smart home market. The price of wireless routing is getting lower and lower, and the penetration rate is rising. The ability to penetrate the wall has become the primary consideration for consumers to choose similar products. Because the development of the Internet of Things and intelligent mobile terminals cover all aspects of life, but a single wireless routing cannot cover every corner of the house, In particular, the kitchen, attic, basement and other rooms even forgot to embed the network cable when they were being built. The network time is too small, even if the sharp tools through the wall can not cover all of them, but the engineering wifi has a large power consumption and radiation. All of this can be solved by using the exclamation point wireless routing. As long as the host is plugged into the power supply, connected to the router, and brought with the attached machine, the wireless signal is sent to where it is plugged in, You can take the network everywhere.

The amazing name is estimated to be derived from the shape of the product. The host is waist shaped, and the expansion machine is round, which together looks like an exclamation point.

The lower part of the product is a compartment with a jack hole for fixing the product.

There are paper attachments such as entry guide and certificate of conformity under the compartment.

The host is waist round, and the middle frame is made of aluminum alloy. A led power button is embedded in the middle of the acrylic panel to display the status of wifi through the led light.

The national standard 10a three hole plug is adopted, and a general RJ45 network cable socket is set below.

The routing IP address is 192.168.5.1, and the initial user name and password are admin.

The expander is round, with the same material and structure as the host, but without RJ45 network cable socket.

The national standard 10a three eye plug is used for the general sample.

Plug the host into the socket to power on and connect the Internet cable.

The network cable is connected to the LAN port on the route. Of course, it can also be directly connected to the cat. Dial up through the exclamation mark. After the host is powered on, it can access the Internet through the ssid connected to INFI_XXXX.

In the room where there is no network cable or the routing signal cannot cover, plug in the extension machine, and you can access the Internet through the wifi hotspot connected to the extension machine.

The exclamation point supports browser management settings in the LAN. Connect the exclamation point wifi hotspot, enter the routing address 192.168.5.1 in the browser to enter the management page, and the default password is admin.

Enter the main interface to see the wireless network and hardware status of the host and the extension machine.

In access control, it supports the management of all devices connected to the router.

Blacklist management can be performed to deny individual devices access to the network.

In WAN settings, three connection modes are supported: static routing, DHCP, and PPOE. In other words, it can be directly connected to the cat.

In the LAN parameters, you can set the IP address and IP address segment, but try to turn off DHCP, set the IP address to the same IP segment as the last route, and find that the device is suspended. In combination with routing IP laser to the host, it may not be used as a switch.

In wireless settings, you can change the name of the SSID, turn on or off the SSID broadcast, change the channel, bandwidth, WPA encryption, mode, etc.

The system settings, including password settings, system time, system log, configuration management, device restart, factory recovery, firmware upgrade, expander upgrade and other settings with low usage, will not be introduced.

As the evaluated exclamation point routing is not a mass production version, it is not perfect in terms of wifi signal strength and APP, so we will not do more testing in this regard.

In general, the exclamation point wireless routing brings users a new network coverage solution, which is different from the "wired" transmission of traditional power cats. The wireless hotspot of the exclamation point wireless routing host and extension machine not only solves the basic needs of small family wireless routing, but also solves the dilemma of no network availability in some areas of large residential buildings due to forgotten wiring for historical reasons, This solution is more secure and more effective than engineering high-power wireless routing. At the same time, we hope that the exclamation mark can be used to develop products suitable for more use environments, such as:

1) The professional version is added. The functions and interface settings of the host refer to the traditional route.

2) Add 1-2 RJ45 network cable sockets to the expansion machine to connect the equipment without wireless network card.

3) The extension machine can achieve the same SSID as the main route to achieve seamless network coverage.

Finally, the exclamation point is now crowdfunding in JD, and interested users can learn about it by themselves.