It is not uncommon for cameras to be merged in public places, or even everywhere, so that when you step out of your house, you will be in the camera lens. However, the installation of these cameras is complex, and they need a lot of auxiliary hardware in addition to cameras to run. However, Netease Qingguo camera is much more convenient. In addition to the camera itself, it only needs a WiFi network, a power supply and a smart phone, which is so convenient, simple and fast.

Netease Qingguo camera is very simple and clear on the front of the outer package.

The model ID、 Manufacturer and other product information, as well as the general functions, instructions and requirements of the machine.

Open the box and find a large eye with 112 ° wide angle and 720P resolution staring at you.

Above the lens is the sensing point, Below the lens is the current status light of the machine, Lens There are 12 high-performance infrared lamps on the left and right sides, which can provide a visual distance of 25 meters in the dark night.

There are clips on both sides of the camera head, which can take the camera head off the camera for other scenes.

The connection between the camera head bracket and the base can be rotated 90 ° horizontally and 360 ° vertically. Any fixed orientation can be fixed, and any dead angle shooting can be easily completed.

There is a ring of anti slip plastic around the bottom of the base. Inside the anti slip plastic is a super attractive magnet. When you hang the camera on the wall, you just need to nail a piece of iron on the wall.

On the right side of the camera head is the TF card slot, which currently supports up to 64G and only FAT32 format.

Below the camera head is The mirco USB power interface and the receiver supporting AAC sound quality record the sound in the shooting area completely. The power supply can be connected to the household electricity through the power adapter, and the mobile power supply can also drive the Qingguo camera, but the 10000 mA battery can only support about five or six hours.

In the middle of the back of the camera head is a two-dimensional code for installation and debugging, and a loudspeaker is placed under the holes around. At the bottom left is the reset button of the machine.

Qingguo camera is equipped with USB power cable, power adapter plug, manual, warranty card and cartoon wall sticker as standard.

The cartoon strong wall sticker is a round iron block, with a cartoon picture on the front and a red sticker on the back. Tearing the sticker is a strong foam adhesive, which can be strongly adhered to the wall. The magnet on the camera base can be easily attached to the iron sheet and hung on the wall, which is convenient and beautiful.

The manual of Qingguo camera is very simple and clear about the five step installation and operation process and the meaning of the working light.

Qingguo camera is also very simple to install and use. First, take a mobile phone connected to the wifi wireless network, the system is iOS 6.0 or Android 4.0 and above, download a NetEase app, scan the QR code behind the camera, and then long press the recharge button behind the camera for about 3 seconds until the status light turns red and blue, and the switch flashes. Click the Next button, and enter the password of the current mobile phone connected to the network, Set the name of the camera and then start installing and connecting the camera. Wait for about 20 seconds for the installation to succeed. If it fails, repeat the above steps to reconnect.

Set the settings in the upper right corner of the single machine after the camera is connected. Set the camera according to your preferences. The default cloud video recording and alarm switches are turned off and need to be turned on by your own settings. Video shooting is also standard definition.

Camera switch: There are three options: on, off, and timing. You can set options according to your own requirements. One limitation of timing is that you need to start at 10 p.m. and shut down at 8 a.m. the next day. You must set two timing options, namely, from 10 p.m. to 23. 59 p.m. and from 0 p.m. to 8 a.m.

Video definition: smooth, standard definition, high-definition, can freely match the current network settings definition.

Alarm switch: after the switch is turned on, an alarm sensitivity appears below, and three gears, high, medium and low, can be set to monitor moving objects in static state. When a mobile object appears in the camera view, the mobile phone EasyChat client will push a gif animation

WIFI network connection settings: after adding multiple WIFIs, when the camera's current network is offline, it will try to connect all WIFIs in order until the available network is connected, but only 5 WIFIs can be added at most.

After the experience of Qingguo camera, the overall feeling and proficiency are very good, but the picture delay is as long as three or four seconds. At present, it only supports mobile end viewing, and cannot be used on the PC end. It would be better to shoot at night with high definition.