I often participate in activities, and there are still a lot of mobile power supplies that I have used. I don't mention the miscellaneous brands. Most of the Xiaomi Asus wins have been played, and most of them have been given away or sold. The last two are Sony's cp-f55000 mah, one is the 6000 mah of the origin, and I sold Sony's 10000 mah. The reason for these two remains is the appearance, which of course includes the portability, appearance design, material texture, etc. The 10000mah large square mobile power supply designed by many public companies in the last two years is ugly. The second is the charging specification. I sold the low current ones. The 10000mah CP-V10 from Sony is that the input current is only 1A, which is too slow to be fully charged in one night.

For the remaining two, Sony has a frosted metal shell. It feels good and comfortable to touch. The appearance of the origin is also good, and the input and output are all 2A.


This application for Meizu fast charging version is still expected, and how to perform is to start from unpacking.

1、 Unpacking appearance

I was quite impressed with the exquisite packaging box of mx5 before. Meizu Fast Charge's outsourcing is also good. It is simple and generous, and clearly marked. Lei Feng's label has no PS trace on it. Hehe.

After unpacking, there are only power lines and instructions, and the mobile power supply does not have many accessories. I don't like to talk about parameters all the time, so I took out the manual and put it on it. The product model is m10. Let's talk about the product model directly.

Meizu m10 gave me a lot of surprises. First of all, the input and output are not only 5V, but the high configuration of 12V input and 9V output. I have never seen it in the mobile power supply I have used before. When I saw the introduction of 1wmah 3.5 hours ago, I was surprised. When I saw the parameters, I realized that it was the speed of 12V fast charging.


Second, the fuselage is not white. The main body is made of transparent frosted material, and white is reflected from the background. Previously, I was worried that white was not resistant to dirt, and it would turn yellow after a long time, so it would not have similar problems.

The third is the thickness and volume. Although it is slightly larger than the Sony and the origin in my hand, the Meizu M10 is 1wmah, and its capacity is not at the same level. With the help of the design of the corner arcs, the visual volume is further reduced. Sony and 5-inch mobile phones are about the same size, while the M10 and 5.5 inch mobile phones are very large and can be put together without feeling awkward.

From left to right origin power supply, Meizu fast charging, Sony cp-f5

The surface of the white matte feels good, and the color matching of gray is reserved. It won't steal the limelight of the mobile phone when it is with the mobile phone. It's a bit surprised at the beauty of silence. The text is printed on the frosted surface. The frosted surface is transparent, with different shadow effects at different light angles. The frosted surface also has a hazy beauty. The design of neutral color and implicit style used as mobile power supply is very flattering. No matter with Apple, Samsung or our MX5 and PRO5, it will not appear abrupt, nor will its own good appearance appear cheap.



2、 Charge and discharge test

It is also not strictly powered off and charged. It is basically the method closest to daily use.


Two mobile phones were tested and cycled twice,

1. Lenovo vibe shot has a capacity of 3000mah. It will be fully charged after receiving Meizu m10. The vibe shot will be powered off and plugged into the m10 for charging, and will continue to be charged after starting up.

Measured
Three lights are on after filling
Two lights are on after filling twice
The third vibe shot 73%

The orico multi port charger 5V2A charges Meizu m10, the second light flashes in 2 hours, the third light flashes in 3 hours, the fourth light flashes in 4 hours, and it is fully charged in 5 hours and 20 minutes

2. Samsung S6 EDGE+, battery 3000mah

First two times full, third time

44% for the third time

Samsung S6 EDGE+original charger, 3 hours and 45 minutes

Although it does not reach the official marking value of 3.5 hours, the speed of 3 hours and 45 minutes is very good. It is estimated that the reason for not reaching the speed is insufficient voltage. The maximum input voltage of Meizu m10 is 12A, and the output of Samsung charger is only 9V
5V2A charging takes 5 hours and 20 minutes, which is not slow for 1wmah mobile power supply

In terms of efficiency, the charging conversion rate of vibe shot exceeds 80%, but the EDGE+is not. The main reason is that the fast charging voltage is 9V when charging EDGE+, and the conversion rate of high voltage output naturally comes down and is relatively normal. I turn on both phones for charging, and check SMS and WeChat. If the conversion rate is strictly tested, it should be higher.

There is no need to say more about the speed of charging the mobile phone. 5V2A is full speed, and Samsung S6EDGE+is full speed, which means Samsung fast charging is supported. It only takes about 1 hour and 15 minutes to fully charge the mobile phone.

Meizu m10 supports the automatic charging stop function, which is very easy to use, and can detect the automatic power-off when it is fully charged. At present, lithium batteries have no memory effect. On the contrary, overcharge will cause great damage to the battery. Charging with a non original mobile power supply has this hidden danger. The power failure of the m10 is very conscientious. The other 11 levels of safety protection are also more reassuring. For users, comprehensive protection is a must for high-end products. After looking at the 11 items of Meizu m10, it is very comprehensive.


In conclusion, Meizu m10 mobile power let me see once again Meizu's consistent pursuit of quality, high face value, high parameters, and comprehensive security protection, which made me very satisfied with this product, but the price was only 149, which was obviously the rhythm of killing friends. Personally, not only users of Meizu mx5 and pro5 will choose Meizu as the fast charging version, but also users of Apple and Samsung. Both the PE of MediaTek and Qualcomm's QC2.0 fast charging standard Meizu m10 support it, which can fully meet the needs of high-end computer users, plus good appearance and workmanship. If Sony does not launch a higher standard mobile power supply recently, It is estimated that many Sony mobile power users will switch to Meizu.