Meizu fast charging mobile power supply with internal and external improvement

We took an active part in this power crowdfunding, and now we finally start!

~~Here comes the picture of opening the box: opening the dream

Perfect embodiment of elegance and freshness, simple packaging

The eye-catching new Meizu log, in sharp contrast with the original log, reflects Meizu's latest brand ideas and a new starting point...

Meizu is a new player in the field of mobile power, and the standard version to the fast charging version is a mature step, which shows Meizu's intention to treat products. The frosted, transparent and hazy design, the grip of the circular edge that fits the palm, and the size and shape of the phone are enough to lead the beauty of design in this field, while Meizu mCharge's two-way fast charging technology does not lag behind people, and is perfectly matched with large screen phones.

>~~Learn more about:

The interfaces are all concentrated on the top: one USB power supply output port on the left (output 5V/2A and 12V/2A), one Micro USB v2.0 data interface on the right to charge the power supply, and four indicators for power display in the middle.

The bottom is marked with model: M10， And the corresponding parameters, such as power capacity of 10000mAh, output and input specifications, are clear at a glance.

From the technical specifications of official data, we can see that this mobile power supply, which is the same size as the 5.5 inch mobile phone, is easy to carry and can be carried on the plane. It is no longer afraid of security confiscations...

Dig out the key points: fast charging function. The biggest highlight of this version of mobile power is fast charging and discharging. Meizu's mCharge fast charging technology supports two-way fast charging. The official theoretical data is that it only takes 3.5 hours to charge the mobile power, and 25% for 10 minutes to charge the mobile phone (of course, fast charger and mobile phone supporting fast charging). Unfortunately, I don't have pro5 and mx5, Just reluctantly use mx4pro to do the charging test, and charge the mobile phone 30% after 32 minutes of actual measurement The speed is good, however, to achieve fast charging with strong performance, it is natural to have high-quality battery cells. Meizu mobile power supply (fast charging version) uses ATL imported battery cells, which are smaller than common battery cells in terms of volume and weight. At the same time, they are explosion-proof and leak proof. This is an important safety factor for mobile power supply, and is also a concern of users.

Let's take a look at the photos of the hotel where M10 Fast Charge accompanied me on business trips these days, and then compete with Pinsheng Power Supply.

>~~PK competition: Meizu M10 fast charging -- VS -- Tasting TS-D151

Appearance comparison:

Meizu M10 fast charging is round and rectangular, with a weight of 236g, a capacity of 10000mAh (5000mAh * 2 ATI imported power cells), a single USB output port (5V/2A and 12V/2A), a single Micro USB v2.0 data interface, supporting two-way fast charging;

Pinsheng D151 is a mobile power supply with a palm size close to square, with a weight of 257g, a capacity of 10000mAh (2500mAh * 4 18650 lithium ion cells), a single USB adaptive 5V 1A/2A output port, and a single Micro USB v2.0 data interface; In addition, there is a button on the top. Double click the LED light on the side to light up, which does not support fast charging.

Summary of appearance and configuration: The two power supplies have the same capacity, and the external interface configuration is similar. The Pinsheng power supply is thicker and heavier, which is not easy to carry, at least not able to put into the pocket. In addition, the imported ATI cell with Meizu M10 built-in cell is better than the 18650 cell of Pinsheng. It should be said that the Meizu M10 produced later is much better than the A151 of Pinsheng.

Performance comparison:

I use these two power supplies to charge two phones of the same Meizu MX4pro. The initial test power of the phone connected to the left Pinsheng power supply is 24%, and the initial test power of the phone connected to the right Meizu fast charging mobile power supply is 53%. After 30 minutes of charging, the power of the left mobile phone is 42%, and the power of the right mobile phone is 82%. That is to say, within half an hour, Pinsheng charges 18% and Meizu fast charges 29%, with obvious difference in charging speed. The capacity of the two power supplies is the same. The mx4pro mobile phone can be charged for about 3 times after being fully charged once, and the Meizu M10 fast charge can be charged for about 3.5 times. On the other hand, it takes 9 hours to charge the power supply with the same ordinary charger, 1.5 hours more than Meizu M10 fast charging. This test did not use a fast charging mobile phone and a fast charging charger. The starting environment is the same, but the results are somewhat different.

In fact, as a well-known brand in the mobile power industry, Pinsheng is better than the common mobile power supply in the market in terms of cell voltage output stability, and its quality is also highly praised. However, this Pinsheng D151 Easy Charge IV is an older generation product after all, which is still obviously inferior to Meizu M10 Fast Charge. Meizu M10 fast charge has obvious advantages in performance due to its mCharge fast charge technology supporting two-way fast charge and the stability of ATI imported battery cells. The appearance of the Pinsheng D151 is also circular. In addition to its thicker grip, it can affect the size of the handle. Although it is not as smooth as the Meizu M10, it is also much better than other ordinary mobile power supplies on the market.

When users buy mobile power supplies, blind people are most concerned about the size of capacity and the portability of appearance. At present, tens of thousands of milliamperes of power supplies are everywhere on the market, but they are all a problem. As far as the development of modern charging technology is concerned, a 10000 milliampere battery is enough to charge mobile phones 2-3 times, so it is no longer necessary to take a huge power supply everywhere, The appearance actually depends on the material and process of the product. Good quality, both in carrying and appearance, is aimed at customer experience, just like Pinsheng and Meizu Mobile Power. Meizu Mobile Power is obviously more attentive in this regard. The frosted and high transparent gray and white design really conforms to the fast pace of modern social life. The price of Meizu M10 fast charging version is also in line with people's purchase level of power products. The price of more than 100 yuan is acceptable for users who need a good mobile power supply.

A conscience product, Meizu M10 (fast charging version) is enough to impress you, bring lasting power to your mobile phone, and show perfect vitality!

................

Meitu Tracking