Router Router, also known as gateway, is used to connect multiple logically separate networks. The so-called logical network represents a separate network or a subnet. When data is transmitted from one subnet to another, it can be completed through the routing function of the router. Therefore, the router has the function of judging the network address and selecting the IP path. It can establish flexible connections in a multi network interconnection environment, and can connect various subnets with completely different data packets and media access methods. The router only accepts information from the source station or other routers, which is an interconnection device at the network layer.

As a necessity for the arrival of the network era, a monster with two horns - router has been deeply rooted in the hearts of people. Do you want to change its appearance? Can it remove those two long and big horns? Can it become smaller? How convenient it would be if you could carry it with you!
In fact, all of this has already been put on the agenda by major hardware designers and manufacturers. Small antenna free routing has already appeared. Today, let's walk closer to this WRE-30 wireless trunk portable router produced by ORICO.

Old Dao opens a new box

Green packaging is still used, plus white envelopes

The back of the envelope is marked with the product information and model

802.11n, 300Mbps, model: WRE-30-WH

Remove the envelope, and the front is the ORICO product logo

Open the box, the small box is exposed, and the supporting network cable is on the right

A total of two products plus a manual and promotional card

The instructions are in both Chinese and English, and briefly introduce the product

The product surface is made of high temperature resistant engineering plastic material with ORICO LOGO printed on the front

Open the plug, it is still small

On the back is the product slogan "EASY YOUR LIFE"

WAN/LAN port on the side, mode adjustment switch and reset key

At the same time, the IP address, login user name and password of the router are also marked

In addition, the product is also equipped with a 5V 2A USB output for convenient charging of mobile phones or tablets

The chamfer of the whole product is smooth, and the appearance is smooth

Product LOGO and website are printed on both sides

The volume of opening the plug is not very large

White telescopic network cable provided with the machine

There is no ORICO logo on both sides, which may be the reason for evaluating the product

The total length of the whole product is 1m

[Software]

The interface design is relatively simple

After entering, the main interface has a large amount of information. There are three modes that can be set

In wireless AP mode, the settings are relatively simple

In wireless relay mode, you can scan the existing wireless network and select the network you want to relay

The wireless routing mode is also very easy to use

The following shows the interfaces of the wireless setting module through a set of dynamic pictures

The LAN interface setting module is also equipped with the clone MAC address function, which is also practical

Dynamic display of system setting page

Dynamic display of advanced setting module page

Similarly, the current status of the route is displayed

Summary

Through the use in recent days, the overall feeling is that the signal is stable and the function settings are relatively comprehensive. At the same time, the portable feature makes this product better. However, some problems were found during the use:

1. When the product plug is opened to the maximum position, there is no limit setting card, and you are always worried about incomplete opening;

2. There is no indicator light on the surface of the product. When the light is on, it only emits a faint blue light in the crevice;

3. There is no orico logo on the supporting 1m telescopic network cable. It is recommended to add it in mass production products to highlight the brand;

4. Since the product has three physical conversion switches, and the three modes can also be set in the web settings page, what if the two do not synchronize the router? I hope to add relevant instructions in the manual or web settings page.

---===over===---