Once upon a time, my millet tablet was almost in the cold. Today Songbook tablet game bracket , my millet tablet is reborn. In recent days, I have been playing real racing with game stand and tablet. After using the tablet stand, I hold the steering wheel with both hands, and play games more realistically.
Unpacking
The Lego tablet board game handle is packed in conventional and paper packaging. The package appearance includes the picture of the bracket, the specification of the bracket and some precautions.
When I opened the package, I saw a thin strip on it. I thought it was useless. After opening, it was known that it was used on the clamp of the plate bracket to protect the layering of the plate. Because double-sided adhesive tape is used, it is easy to fall off. In addition to the bracket, this product has a USB cable and a manual.
This flat support adopts a steering wheel design. The base consists of two small speakers and several buttons. The black protruding box in the middle of the flat support is a sponge. All parts of the support that contact the flat are protected to prevent damage to the appearance of the flat.
There is a knob at both ends of the clamp of the flat plate, which can adjust the height of the clamp according to the thickness of different flat plates. This allows the bracket to support various plates more.
There is a button on the back of the upper part of the support. Press it to adjust the clamp of the support to a larger size. The retractable shelf is suitable for all flat plates between 7-10.1 inches.
The Songs Tablet Game Bracket adopts a 360 degree rotating bracket, which can not only adjust a certain angle up, down, left and right, but also press a certain position.
There is a change-over switch at the back of the bracket, which can adjust the switching between the internal power supply and USB power supply. The other side is the interface of the MINI USB data cable.
Another feature of the music game stand is the Bluetooth speaker. The speaker uses two 3W stereo speakers. The Bluetooth version is V2.0, which can support Bluetooth devices within 10 meters.
Application
Since it is a tablet game stand, of course, please take out my Xiaomi tablet. After the tablet is fixed to the bracket according to the instructions, the official game can be played. The first game is Real Racing 3. The bracket uses the steering wheel handle, so playing the racing game will be more realistic.
After using this stand, a rookie like me can still win the first place when playing a real car race. It is conceivable that this stand is easy to handle and operate. You won't feel too tired when playing games for a long time.
Next, we will connect the panel to the Bluetooth speaker of the bracket. First turn on the Bluetooth switch of the panel, and then long press the start button on the far right of the bracket until the Bluetooth indicator on the panel flashes.
In the Bluetooth device of the tablet, you can now search for the LOCTEK G1 bracket. We can pair it with the bracket by clicking it. After the device is connected, the speaker will receive a beep indicating that the connection is successful. At this time, the tablet can play sound with the Bluetooth speaker. If you play games again, the sound effect will be more powerful.
The tablet stand is not only more convenient in playing games, but also can free your hands and make the tablet more dynamic if you watch movies with the stand.
Especially the most popular one hundred thousand jokes. It turns out that Nezha grows like this here, hehe.
Disassembly
I have to say that after playing with the stand several times. This will happen to the two clamps of the flat plate. The clamp on one side will protrude, and the clamp on the other side will not protrude. As a last resort, the bracket had to be disassembled by itself.
In fact, it is very simple to remove the bracket. Just pay attention to several places. First, remove the hinge shaft of the bracket, and remove the four screws in the picture to disassemble the bracket.
Note that there is a spring inside the winch shaft. Pay attention to it when disassembling. Do not lose the screw by the spring force.
There is also a simpler way to directly disassemble the bracket. As long as the universal joint is turned off, the supporting base can be directly separated from the support.
Next, open the upper part of the bracket. Note that all the screws on the bracket are hidden inside the black rubber pad. The screws can be seen after the rubber pad is taken out first. There are many screws here. It is better to have a small box to collect screws.
After removing the screws, be careful not to open the cover in a hurry. First, hold the two flat clips, and then slowly open them. Then you can see the internal structure.
There are two large synchronous gears, and the pinion in the middle of the large gear is connected with the rack of two clips respectively.
The reason why the two clamps are not in the same position is actually the matching problem of these gears. There is also a problem with this fork. The fork is separated from the gear after pressing the key, which makes the two big gears separate under the action of the spring force, so the fork is easy to wear.
After installing the two clips, pay attention to connecting one clip with the spring, and then the cover can be closed. Now you can restore symmetry on both sides.
It is better to install a few screws first, check if there are any problems, and then install all the screws. After several tests at this time, the clip telescopes normally. Then install the bracket back to the base.
I was thinking about the end of the disassembly, but I was curious about the chip used in the Bluetooth speaker of the bracket, so I continued to disassemble it without stopping. To remove the Bluetooth speaker, first remove the rubber pad of the base. And notice that all the screws of the base are slanted, with two screws in two places and one screw in the other two places. Pay attention when removing.
The bluetooth speaker of the Lego game bracket is composed of a circuit board and two 4W 3W bluetooth speakers. The speakers are special speakers for bluetooth speakers produced by Shenzhen Deyin Electronic Technology Co., Ltd. No wonder the stand has excellent sound effects.
The circuit board is composed of Bluetooth module and speaker processing module. Below the circuit board is the built-in lithium battery, which should be about 1000MA in appearance and size. It can provide a good range of Bluetooth speakers.
The Bluetooth module uses CSR57F68, and the module uses CSR BLUECORE5 chip to provide high-quality sound quality and compatibility for the module, with more optimized overall performance. The 57F68 Bluetooth module adopts the drive free mode. Just connect the module to the application product, power on, and connect the keys, you can quickly realize the wireless transmission of music and enjoy the fun of wireless music.
Here we will focus on the audio module, HT6808 is a stereo output filter free Class-D audio power amplifier with ultra-low EMI and anti clipping distortion function. The efficiency is up to 90% while providing performance comparable to that of Class AB amplifier. The biggest feature of HT6808 is anti top clipping distortion (ACF) The output control function can detect and suppress the output signal clipping distortion (broken sound) caused by the excessive amplitude of the input music and voice signals, and can also adaptively prevent the output clipping caused by the power supply voltage drop in battery applications, significantly improve the sound quality, create an unusual comfortable music enjoyment, and protect the speakers from overload damage. However, we can see that there is a fly wire at the fourth corner of the module. We don't know whether it is a design wiring defect or a PCB printing problem.
Summary:
After the comprehensive disassembly of the bracket, as well as the use experience in recent days. This game stand is generally good, especially when playing games. The comfortable manipulation experience and humanized design add a lot of features to this product. However, attention should be paid to some details, such as the adhesive strip protecting the flat plate. Also, the side keys of the panel cannot be used when using the panel clamp. Although the Bluetooth speaker of the stand can adjust the volume, the panel must be removed if you want to light the panel after the panel stops.
In addition, I hope the material of the gears inside the bracket, especially the shift fork, can be improved. In terms of circuit, I hope that the next generation of products can use Bluetooth 4.0, or even use WIFI connection. In terms of functions, I hope it can be more powerful, such as adding some game keys and game dynamic functions, which can support more games. It can even add some smart functions to connect with the popular smart home. |
