At present, the hardware of smart phones has made rapid progress, even reaching the processing capacity comparable to that of PC terminals. However, it is always a hard wound in terms of batteries. No matter how awesome the performance is, it's just a brick that can't be started, which greatly affects the user experience. Due to cost and other factors, most mobile phone manufacturers are only willing to optimize power saving software. The Jinli M5 is a mobile phone that fundamentally solves the problem of battery life. Once the Jinli M5 was launched, it was sought after by the market and redefined the development direction of smart phones.
With 6020MA battery, the Jinli M5 mobile phone has broken the problem of smart phone endurance in the market. One charge can last for 4 days, and standby can last for 49 days. And M5 adopts MT6735 four core 64 bit processor of MediaTek, with the main frequency of 1.3GHz; The memory is 2GB RAM+16 GB ROM, which supports up to 128GB TF card expansion; The front 5 megapixel camera+the rear 13 megapixel camera are used for photographing, and the screen is a 5.5 inch Samsung AMOLED high-definition screen with a resolution of 1024 * 720. The operating system adopts the basic Android 5.1 customized amigo 3.0 system, and supports Sannetcom. Now let's unveil the mystery of this super endurance with our editor.
The main color of the outer package of Jinli M5 is white. On the front, there is only a silver M5 on the lower right corner. On both sides, there is the logo of Jinli. On the bottom, there are the IMEI and MEID codes of the mobile phone. On the back of the mobile phone package, there is information about Jinli. Plastic film packaging is adopted. The whole outer package looks very simple, giving the impression that it is particularly clean.
Tear the plastic film off the phone and open the upper cover to see the front of this super phone. The mobile phone is protected by a layer of frosted film, with the logo of Jinli and four characters of super endurance.
Take out the phone, and there is a tray under the phone, which is made of polystyrene plastic, to protect the phone more stable in the package.
The Jinli M5 mobile phone is also equipped with a transparent protective case as standard. Few mobile phone manufacturers are equipped with mobile phone cases with trademarks. In addition, the standard configuration of Jinli mobile phones has been attached with a screen protection screen film for everyone. It can be seen that Jinli can do everything for the sake of customers.
At the same time, the Jinli M5 is also equipped with a high fidelity headset, a fast charger, a data cable and an OTG cable as standard. The Jinli M5 supports fast charging, and can use OTG cable to provide temporary charging for other equipment.
Traveling charger of Jinli, model: TC-G300。 The output voltage is 5V/9V, and the current is 2A. Manufactured by Huizhou BYD Electronics Co., Ltd.
The magic OTG data cable can connect your USB stick, mouse, keyboard and other devices with your mobile phone, and can charge other devices.
At first glance, this earphone looks ugly, but after listening, the sound quality is still very good. It's just that its appearance is the same as its mobile phone, without any publicity.
Take a small group photo of the accessories. I wanted to take a family photo, but I forgot to take the charging head and protective case together.
The quick start guide and service manual of the Jinli M5 mobile phone are packed in a small paper bag with a card needle outside. The SIM card and SD card slots of the M5 mobile phone are opened by it.
Jinli's mobile phones will be attached with a screen protective film when they leave the factory, so users will no longer have to pay for it. Just peel off the surface and use it. The external dimension of the Jinli M5 mobile phone is 152mm × 76mm × 8.5mm, and the weight is 214g. Although the weight is slightly heavier, it is also due to the battery of 6020MA, but it can be seen that the thickness of 8.5MM can be achieved by Jinli.
The back of M5 adopts a three-stage design. The middle of this white mobile phone is coated with silver metal. With frosting treatment, the four sides are excessively curved, making it more comfortable to handle.
The top of the Jinli M5 is a 3.5MM headphone hole and an infrared red interface, which can be used to directly control TV, air conditioning and other infrared remote control devices with mobile phones. With the Jinli M5, there is no need to worry about changing the remote control. With a 13 million pixel rear camera, the shooting effect of the Jinli M5 is shown in the rear.
On the right side of the M5 mobile phone is the SD card slot and two sets of physical keys, namely, audio plus and minus and power key. The keyboard and the metal side adopt the same processing technology, making it look like a whole.
There are three physical keys below the Jinli M5. At the bottom of the phone is the charging data cable, and the interface is a micro USB interface. The hole next to it is a microphone.
On the top of the phone are the distance sensor, earpiece and front camera. The M5 uses a 5 megapixel front camera. Blessed are the MM who like to take selfies. The camera beauty function of the Amigo 3.0 system of the M5 mobile phone is sure to make you reach the goal of beauty.
The bottom of the back of the phone is an external sound hole, M5 mobile phone adopts embedded box structure design. The single unit selects AAC 0916 high power and high sensitivity unit, and five high magnetic energy grade magnetic steels form a composite magnetic circuit, which has strong magnetic force. This unit is a loudspeaker developed in cooperation with NXP's TFA9890 SmartPA. It has optimized the design of loudspeaker amplitude symmetry, and can deeply tap the potential of the loudspeaker with PA. Demonstrates very high quality sound performance.
This is the phone effect after putting on the standard protective case. Although it looks a little thicker, it has an extra layer of protection, which is acceptable for mobile phones. The original is different. The opening positions of each interface are accurate and closely fit with the phone. And after using the protective case, the M5 rear camera protrudes that part due to the arc edge, which is just aligned with the protective case, covering the projection. The following is a detailed picture of each opening location.
Top of protective casing
Bottom of protective casing
Key position on the right side of the protective shell.
Camera position on the back of the protective shell.
Another angle, the prominent position of the camera is not obvious.
The shooting effect of the Jinli M5 mobile phone is good on the whole. With the multi-function of the amigo 3.0 camera, you can shoot a variety of different effects. But in the case of insufficient light, it is still incomparable with the camera. In the previous post about M5 photography, some photos have been post processed. Here are a few live pictures of M5, which are guaranteed to be the original pictures. The first is a partial enlarged view, and the next three are live pictures.
Summary:
As a super endurance mobile phone, the endurance has been measured before, which can be said to be the ultimate. Its simple appearance is so low-key. On the contrary, the overall feeling is more intimate, with a slight sense of weight in the hand, but it is more practical, without the feeling of frivolity. I like this white M5, especially the three-stage design on the back of the phone and the excessive arc, which makes it more smooth to hold. Even with the protective case and 5.5 inch large screen, it can be manipulated by one hand. However, the position of the rear camera is in an excessive arc, resulting in one side protruding the rear shell. It left a little pity for the overall appearance. There is nothing perfect in the world. The Jinli M5 has become a disaster with its excellent endurance and other functions are not inferior. How about leaving some regrets?
(End)
The article on the trial of iGo is completed by netizens, which does not represent the views of this website.