It is believed that everyone will be familiar with the HUB hub. Its appearance has solved the problem that the USB interface of the computer is not enough. Nowadays, USB interface is not only used to transmit data, but also used to charge electronic devices. At this time, HUB hub with data transmission and charging function came into being. Here, the author introduces an Orico/ORECO RH7C2 high-end desktop multi port USB3.0 multi-function high-speed hub.

Orico/ORECO RH7C2 has five USB3.0 and two BC1.2 charging interfaces (interface color can be distinguished). The overall shape is slightly larger than a bottle of canned cola, with a height of about 117mm and a diameter of 77mm.

BC1.2, a charging standard, is mainly used on USB hubs. USB2.0 and USB3.0 are two commonly used USB interfaces in the market. In addition to the difference in data transmission rate, there is another difference in current output. The current output of USB2.0 is 5V500MA, and the current output of USB3.0 is 5V900MA. However, there may be too many devices used, so the current will drop a little. In general, the output current of USB interface is about 5V500MA on average. While the USB hub with BC1.2 charging standard can support data transmission and the maximum output of 5V1.5A charging current per interface when connecting the computer, and when connecting a power adapter, each interface can output a maximum 5V2.4A charging current.

Through the introduction of BC1.2 above, we can see a power adapter in the product list of Orico/ORECO RH7C2, which ensures that each interface can have a corresponding current.

In addition to the power supply and data cable interface, there is also a power switch on the back of Orico/ORECO RH7C2, which is very practical for users who like to cut off power when not in use. There is no need to go under the table to pull out the plug.

There is a blue LED indicator on the front to clearly know the use status of the product.

Non slip foot mats at the bottom.

Transmission speed test:

Environmental Science:

Computer hard disk: Chuangjian 340 series SSD solid state disk

Computer interface: USB3.0

Mobile storage: Kingston 16G USB3.0 USB flash disk

WD 5000LPCX mechanical hard disk

Test 1: Read/write speed on Orico/ORECO RH7C2 USB3.0 interface

The writing speed of Kingston USB flash disk is very average, only 12MB/s, while the reading speed is quite satisfactory, reaching 112MB/s.

The read/write speed of the mobile hard disk on the USB3.0 interface has reached about 90MB/s

Test 2: Reading speed of BC1.2 charging port

Take the mobile hard disk test. The data shows that the reading and writing speed of the BC1.2 charging port also meets the USB3.0 standard. It can be said that Orico/ORECO RH7C2 hub actually has seven USB3.0 interfaces.

Summary:

Orico/ORECO RH7C2 high-end desktop multi port USB3.0 multi-function high-speed hub, which combines the hub and charger, beautifies the desktop. The key is whether the price is friendly to the people, which is the key to getting on more people's desktops.