This is a very portable mini soldering iron. I remember that when I learned to repair mobile phones, the soldering iron used was relatively large and could not adjust the temperature. It was easy to burn, but the price was relatively cheap! Compared with the TS100 mini soldering iron, it is too weak. The TS100 mini soldering iron is very portable and small. It can display the temperature in real time. It can also upgrade the software version. It is very smart. I just had a modem motherboard component fall out, and just took this soldering iron to connect the wire. Next, let's experience this mini soldering iron!

Inside the package is a power cord and a box with a mini soldering iron

The appearance is very beautiful. It is a simple business drawer box, with silver logo printed on the top and Leifeng logo in the middle

After disassembling, I saw that there were instructions on it

Below the instruction is the soldering iron handle and soldering iron core, and there is a small bag containing a hexagonal wrench

Let's take out the iron handle and soldering iron core

There are two interfaces directly above the soldering iron handle, one is the battery input interface, and the other is the MicroUSB interface. The MicroUSB interface is used to connect the computer, configure the soldering iron parameters and upgrade the soldering iron software!

Ready to install

After fixing screws

Plug in the power supply for test

Temperature rises gradually

When it reaches 300 degrees, the right side is displayed as stable

Long press the left button to speed up cooling

Long press the right button to accelerate the high temperature

Next, we use the USB data cable to plug in the soldering iron to connect to the computer. The small screen will display CONFIG

The computer will display that new hardware has been found, and then we can see a removable disk in my computer. When we open the removable disk, we will find that there is only one "CONFIG. TXT" file in it

This removable disk is only 8KB

Open the "CONFIG.TXT" file and you will find that there are parameters of the mini soldering iron. For example, the first should be the temperature when sleeping, the second should be the temperature when working, and the third is the waiting time, that is, the time when entering sleep. These parameters can be adjusted according to the following parameters

Next, unplug the USB connected to the computer, press and hold the "left key" and plug in the USB cable. The DFU mode will enter, and the screen will display DFU: 3.42, which should be the firmware version

New hardware will also be found. This time, a disk named DDE7AF9 will be read out

This disk is 1.96MB, which is obviously much larger than the disk configured above. Obviously, this is the firmware disk

Open this disk and you will find two directories and one file. This is the directory for upgrading firmware, which is used for machine flushing. As long as you download the latest firmware, you can receive it here!

Conclusion: After some experience, the design of TS100 mini soldering iron is very convenient to carry, and the appearance is also very beautiful! In addition, the temperature can be adjusted when using, and the firmware can also be upgraded, which is a good news for contacting electronic workers. Of course, there are some shortcomings. For example, the power cord is relatively large, and I hope it can be improved to make it smaller! The instructions are not perfect, and Hopes there are many kinds of soldering iron cores that can be purchased , hope that the official version can perform more perfectly when it appears!