Nowadays, all brands of mobile phones have gradually used fast charging technology to increase their selling points, which is certainly excellent. However, fast charging is generally realized on the AC power supply. It is inevitable that the mobile phone will run out of power outside. It is better to use fast charging when using mobile power supply. Today, we have brought you a mobile power supply with fast charging function - ORECK Q1, which can only be seen from the appearance of Q1. It is not a battle line with today's mobile power supplies with different shapes and rich colors.
Since the main feature is fast charging, let's take a look at the product parameters:
Output parameters: DC 5V/2.1A 9V/1.8A 12V/1.35A
Input parameters: DC 5V/2.1A
Input interface: Micro USB
Output interface: USB Type－A
Battery capacity: 10400mAh (37.44Wh)
Product parameters
From the output parameters, Q1 supports the Quick Charge 2.0 fast charging technology, and the input can also reach a fast level, which can shorten the charging time for mobile power to a certain extent.
All products in the packaging box (ORECO Q1 body, USB Type-A charging line, instructions, warranty card certificate)
The capacity of ORECO Q1 is 10400mAh (37.44Wh), with four 18650 lithium ion batteries built in, and the aluminum alloy shell is used to facilitate heat dissipation and enhance the overall strength.
The output terminal has an interface that supports fast charging. When charging the phone, you need to press the activation button before charging, and the activation button can also be used to check the remaining power.
USB Type-A data cable
Q1 uses an uncommon USB Type-A data cable, The USB female connector can be inserted blindly. In the case that USB Type-C has not been popularized, it is good to use USB Type-A, at least it will not encounter the embarrassing situation of USB male connector being inserted by mistake.
Oryco Q1 weight (about 280g)
Samsung S6 edge+weight (about 150g)
The weight of Oryco Q1 is about 280g, which is a little heavy. It is inconvenient to carry it everyday. Part of the reason is that four 18650 electric cores and metal shells are used, but it is acceptable to sacrifice portability on the premise of supporting fast charging.
Mobile phone quick charging interface
The data measured when charging the mobile phone quickly: 9.16V/1.12A, which can be identified as fast charging when connected to the mobile phone. The test charging time is 20% - 100%, and the charging takes 1 hour and 30 minutes. After the completion of this charging, Q1 displays 3/4 of the remaining power. It can be conservatively estimated that Samsung S6 edge+with a battery capacity of 3000mAh can be charged 2-3 times, enough for daily use (data is only for reference). However, during the charging process, the mobile power supply and the mobile phone are quite hot. The mobile phone does get hot to some extent during the normal fast charging process. It is recommended to pay attention to the placement of the mobile phone and the mobile power supply during use to avoid overheating.
As an age of looking at the face, for a product that needs to be taken on hand every day and used frequently when going out, Q1 is unavoidably lacking in "face value", but in this age when it is clear that we can rely on the face to eat, we choose to rely on our ability to face ourselves. Therefore, the advantage of quick charging supported by ORUCO Q1 conceals the defect of poor appearance. After all, I want to charge my mobile phone quickly instead of always holding a beautiful but cumbersome mobile power supply.
Reward
Scan WeChat and reward the author
