With the development of intelligent industry, more and more intelligent devices come into our lives, and they are intelligent. But our intelligent creators, electric soldering irons, are still the same. Ordinary electric soldering irons are not stable enough, the temperature is not constant, and there is static electricity. However, the welding platform is bulky and difficult to carry. Moreover, we often forget to turn off the electric soldering irons, causing them to be heated all the time, Damage to the welding tip and the heating core may, of course, cause a big fire. At this time, a small and intelligent electric soldering iron was born, TS100， It turns out that we have never cared about our old friends. Let's compensate for them and start the evaluation of the Ts100 intelligent soldering iron.

First, let's unveil its mystery

The standard configuration and simple package are really small, and the package is only as big as two packs of cigarettes. I can't believe there is such a product

I didn't expect that the B2 version will be used in this trial. Of course, for most electronics enthusiasts, K nozzle and I nozzle should be used more. B2 is suitable for soldering new pcbs and tin wire connection

The parameter of the power supply is worth mentioning. The power supply is also very small, really small. It is only about the size of two USB flash drives, compact, but the power is pleasing. The design of 19V 2.1A parameter 20AWG provides a very stable power supply

Open the package, and you will see the instructions. Come and have a look

The front of the manual... Forgive my white balance

The main character comes on stage with a pair of H1.5 L wrenches to replace the soldering head

A simple explanation, a glance, let's get started

I was surprised by the small size of the host, which is even smaller than tweezers

The superscript is not for sale. This is our favorite place for test enthusiasts. We are the first user. This is our own speech space

The silver model logo of DC5.5 interface is adopted, and the B grid is full

There are only two buttons and one screen. It's so small and economical that people can't put it down

The soldering head of TSB2 should be a standard customized soldering head based on T12. Of course, it has been officially sold now, and will be released for sale later

Brand new B2 solder tip, waiting for tin

Melt tin at 300 ℃, and feel very comfortable melting, which is even more pleasant than 936

To release my Arduino, a small single chip computer with various patterns, this one, my destination is the sea of stars, the sail of science and technology, and set sail

I believe you can also see the length comparison. It is about the same size as our pen and screwdriver. It is compact

Is it surprising to compare with T12 of FX951?

It is reported here that the welding nozzle of TS is only 110mm

Compared with this welding platform, it feels mini

300 ℃ temperature test

Room temperature 21 ℃

Ts100 calibration method, temperature sensing calibration heating time: 16S

Oled welding station calibration mode NTS test heating time: 13S

It can be seen that this speed is very fast for a soldering iron, and this speed also surprises me

Overvoltage and overload test

The test results of the electric soldering iron controlled by adjustable voltage are as follows

It's like this after removing the torx screws. It can be seen that the high-quality brass shrapnel makes people happy. It's great

circuit design

The acceleration sensor and single-chip modular design are adopted in the design. Later maintenance should be much more convenient and save internal space. If you understand, you will understand. The PCB wiring of single-chip is still very troublesome

In terms of components, the solution is still excellent. The materials are not simple, and the redundancy space is relatively wide

The official forum has found some information about the principles

Software

The product uses Microusb to connect computers to configure files and upgrade the system, saving keys in design. This is the first time to see such a design

Connect to the computer and we can see

An stm32 storage device is accessed, and then we can configure the information

Standby temperature, operating temperature, sleep time, screen rest time, acceleration sensitivity and minimum operating voltage can be set

Very simple design style

When we upgrade the firmware, we will enter the DFU mode

In this way, we can upgrade the firmware of the electric soldering iron. It's fun to think about

It is good to directly copy the firmware. The upgrade method is worth praising

Test summary of TS100

ps： The B head of the small editor is very poor. Usually it is K head, so the test of the welding part should look at other big theories

advantage : Small size, intelligent sleep, powerful functions, beautiful appearance design, It's very suitable for giving gifts to friends ……

shortcoming : The sleep mode is not obvious, which is easy to make people hot by mistake, and there is still a sound when they are hot. The Microusb design is too deep, and the short line connection is easy to touch and not bright, which cannot be recognized by the computer. The B head in the suit, if it is the K head, it will be better

Finally, TS100 was officially launched here to release forum materials and store addresses for easy download

Forum materials ： (There are open source code, the latest firmware, and electronic manuals. There are no paper manuals. Of course, there are like-minded friends.)

Purchase address ：

Finally, thank you for selecting me to participate in this evaluation. I hope Lei Feng will do better and better