Of course, the emergence of smart home is for better life and more intelligence. This requirement is not only easy to install, but also smart in use. I have previously introduced the lifesmart smart home kit, which I will install at home for a few days to experience.
On《 First experience of smart linkage lifesmart smart home 》In, the characteristics and appearance design of various smart devices in LifeSmart smart home have been introduced in detail, and the simple adaptation function has also been introduced, so this article is no longer cumbersome. For smart home, if it can better integrate into life and improve the use efficiency, this is the place to reflect and do a good job. Today, let's show you how LifeSmart smart home can be used in a day.
I always like to be the first to try new products and technologies, and I am more willing to change my living habits to use them to adapt, but it is a bit difficult to change the environment. Fortunately, LifeSmart smart home can be directly used without modifying the home decoration, and even the wall mounted switch does not need to make a big move in installation.
As shown in the above figure, I can install the dynamic sensor and the environment sensor in my home. After combining the matching back rubber plate with the smart device, you can install them anywhere. The smart device of LifeSmart adopts white plastic glossy treatment in its appearance design, which is low-key and simple on the whole. It will not be abrupt when installed at home, which is also something I quite appreciate. And most smart devices use built-in power supply, and the standby time of up to 6 months is also very relaxing.
I had nothing to do at work to see how the environment at home was like. It was really hot when I went out in Shenzhen on a hot day. Unexpectedly, it was 30 ° C indoors. There is no one at home when you go to work. Even if you turn on the smart socket to turn on the air conditioner, it's not interesting. You'd better wait until you get off work to have a look.
Occasionally, I also use the wireless camera to check the situation at home when I go to work. The resolution of the LifeSmart wireless camera is up to 640 * 480, which can be viewed smoothly even if the home network is poor. LifeSmart smart home has a good intelligent linkage. As shown in the figure above, I set the wireless camera to start automatically when the mobile detector detects movement. In this way, you don't have to turn on the wireless camera manually. The more intelligent you are, the less you can feel it.
It's time to get off work. Through the LifeSmart wireless camera, it seems that no one has come home yet. It seems that we will have dinner alone tonight. Then look at the environment sensor. Ouch, it's really hot in Shenzhen. At this point, it still needs 31.3 ° C. It's hot enough to get home, and it's unbearable to get in the door.
Of course, how can a smart home check its own information to know how the environment is? By setting, when the LifeSmart environment monitor detects that the temperature is too high, it will push the corresponding information to the mobile phone to remind you, so you don't need to manually detect it. Similarly, you can also set the corresponding light intensity, humidity and battery power to push information.
It's not comfortable to warm up when you get home. Fortunately, the room air conditioner and smart socket are ready to be combined. And through the LifeSmart Smart Center, you can also set corresponding automatic trigger conditions. For example, I set the smart socket to automatically power on when the temperature detection of the environment sensor is above 26 ° C, and then the air conditioner will automatically turn on.
Due to equipment limitations, the air conditioner connected to the LifeSmart smart socket needs to be powered off once it is turned on, so that it can be automatically started after power on. If LifeSmart can cooperate with household appliance brands, the whole smart home will be more perfect.
Finally, I got home. I could feel the cool air conditioner in the living room when I opened the door. Hey hey, in addition to combining the room air conditioner with the smart socket, I also combined the living room air conditioner with the smart socket. After setting the corresponding starting conditions, when the environment sensor detects that the temperature is above 28 ° C, it will automatically power on the air conditioners in the living room and the room.
Laziness is the first productive force of creation. For a long time, it has been troublesome to turn on the light when entering the house and then go to the room. Can't it be turned on automatically? After the LifeSmart wall switch is installed, the scene association is carried out through the LifeSmart dynamic sensor. When the dynamic sensor senses walking and the light intensity detected by the environment sensor is dark, the wall switch automatically turns on to turn on the lights in the living room. Such a series of actions are automatically completed by LifeSmart smart home without my operation.
The above mentioned scenes are actually realized through the intelligent scene of LifeSmart smart home. When you open the door and walk in, the dynamic sensor detects movement, and the brightness detected by the environment sensor is too low, it will trigger the floor lamp in the living room to turn on, so you don't have to search for the switch in the dark.
In addition, when the dynamic sensor at the door detects movement, it will trigger the wireless camera to take a picture and push it to the mobile phone. Hey hey, with this function, you don't have to worry about strangers sneaking in even if you are not at home. Of course, it would be better to say that if the corresponding time period can be set to avoid accidental touch.
All smart devices need to rely on the LifeSmart Smart Center for pairing and management. Like smart devices, LifeSmart Smart ZTE is integrated into the home harmoniously and concisely, with white plastic finish. After connecting the power supply and the network cable, you can place the LifeSmart Smart Center in the corner and become a hero behind the scenes.
In my opinion, smart home represents more intelligence and automation. I don't need to make a big effort to transform the home environment to use smart home. Just like LifeSmart smart devices, selecting a good location or a good place, and directly pasting it on to complete the entire installation process, this is smart. The connection between LifeSmart Smart Center and smart devices is also intelligent and automated enough, which is also what I like and pay attention to.
It is true that the current products of LifeSmart smart home are not rich enough. For example, if you want to start the air conditioner automatically, you need to set the air conditioner properly. LifeSmart will also launch intelligent devices with infrared remote control, which can also remotely control the temperature of the air conditioner and automatically turn on the TV. Of course, with a router, it can also automatically turn on the download. This is also something LifeSmart can do in the future.
