Let's take apart Newman's first mobile phone - button mobile phone. We all know that Newman, like Meizu, is a company transformed from MP3/MP4 to mobile phone. What surprises will this thousand yuan fingerprint button mobile phone bring us? Please follow my footsteps!

Of course, before opening the back cover, the card slot is taken out with the card taking pin.

With the help of a hot air gun, sweep back a few times on the corner of the back cover of the button mobile phone, so that the glue scattered around the back cover can be slightly dissolved for easy disassembly.

Then, borrow tools, find a corner that can be easily tilted, gently tilt it, and then open it along the edge of the rear shell.

In this way, the rear shell is separated from the body.

Use a small cross screwdriver to remove the screws distributed above. Under this situation, the Newman button phone needs to be patiently disassembled because there are many screws after the back cover is removed.

After the screws are removed, use tweezers to slowly tear the graphite paper stuck on them for heat dissipation.

After tearing off the graphite paper, two small cross screws are found. Remove the screws and take out the fixing piece.

Find the crowbar and pry the battery cable and the cable connected to the front and rear panels separately.

Take out the metal baffle of the battery. This metal baffle is bonded with the graphite heat dissipation sticker, which is mainly used to assist the CPU heat dissipation and protect the battery from damage.

Use a small pry to find a corner that is easy to cut in the host, cut it along the edge and separate it.

You can see various components inside, such as fingerprint identifier, vibration motor, distance sensor, etc.

Use a hot air gun to sweep back and forth at the edge of the battery, and pull it up and remove it with the help of a handle at the back of the battery.

Remove the last screw and the cable beside it.

The motherboard can be removed.

For the remaining auxiliary boards, unplug the flat cable connecting the main board and the rear board and remove it.

finished? not yet...

Next, gently open the metal cover on the motherboard with tweezers, and then cut off the metal edge slots with tweezers, exposing the CPU and 2G RAM of Qualcomm Snapdragon 615 (MSM8939).

Finally, let's take a group photo.

All tools used this time: cross screwdriver, tweezers, crowbar, card taking needle, small pry piece, hot air gun.