With the advent of the intelligent home age, all kinds of household appliances have changed their appearance, returned to further education, and appeared again after wearing a new smart coat. Wireless smart light is a new product, originally just led With the application of new technology, light has become a high-tech intelligent product. Many manufacturers have to work hard on it when expanding the smart home circle. After all, light is widely used in family life.

Most of the current wireless smart lights are controlled by mobile phones or remote controls, which can adjust the light, color and temperature of single and multiple lights, and can also set different scenes. At present, the common connection modes of wireless smart lights are zigbee 、 WiFi , Bluetooth. The author has not yet touched the smart lights of the first two connection methods, but has experienced two smart lights of the Bluetooth connection method. One is from Shenzhen Zhongzhilian Technology Co., Ltd connlight Smart bulb, one of which is X-Light plus Smart light bulb, one of the first products of Meizu Smart Ecosphere, is produced by Shenzhen Weizhi Electronics Co., Ltd.

First, let's briefly talk about the two smart lights that the writer has experienced. First, let's talk about Meizu's X-Light plus Smart light, whose wireless control is based on Bluetooth four Low power technology, more power saving, low latency, and long effective connection distance. However, the requirements for the system have also naturally increased, requiring that the Android mobile phone system at least four point three above. Although the current mainstream mobile phone systems are above this version, there are still most low-end smartphone users in the market. If these users want to use smart lights, they can consider connlight Smart ball bulb, because the Bluetooth version it supports only requires two Just above. Most low-end smartphones can run.

However, the author has applied for a more convenient and easy to use smart light on Leifeng. It basically supports both high-end smart phones and low-end smart phones. Moreover, unlike the smart light products experienced by the author, it neither requires WIFI It does not need Bluetooth, but is controlled by digital voice control, which is extremely convenient to use. Next, let's take a look at this magic digital voice controlled smart bulb.

First, let's take a look at its packaging. It is different from the two smart bulbs that the author has experienced. The packaging of HEIDEN is very exquisite. The packaging volume is only about half of that of other products. Small size can reduce costs. HEIDEN sells for only forty-nine Yuan, which is far lower than the price of the two smart lights of about 100 yuan experienced by the author.

The design style of black and white matching can prominently highlight the product name. It is called Heideng, but it is not a black light. Hey means "hello" in Chinese, which is the same as "hi". This understanding highlights the friendliness of the product. You can also understand it as another meaning - surprise, "Hey! Look at that light!" This means that the product will surprise people.

Based on the principle of what you see is what you get, the pattern on the packaging box has already indicated the appearance of your internal products.

The coefficient of the product can be seen at a glance on the package. The coefficient of the product can be seen at a glance on the package. Like the two smart lights that the author has experienced, the highest brightness of the HEI light is also six hundred Lumen above.

Hey, the lamp control charm, we will talk about it in detail next.

The contents of the product inside the box are very simple, LED One main light and two two-dimensional code stickers (one for control on and one for control off).

The exterior design of HEI Lamp is similar to that of other smart lamps in terms of size and weight. The interface is also internationally used E27 Interface, applicable to lamps in most families.

Hey, the lampshade part uses pc The resin material is the same as that of other smart lamp shades. The lamp body is not made of all metal, but of plastic coated aluminum, which is more insulated and safer.

The same heat dissipation design as other smart lights is also available under the lampshade of HEI LAMP, which is similar to Meizu's xlight Completely rely on metal surface for heat dissipation connlight The heat dissipation is different depending on the metal grille. The air guide hole adopted by the lamp is used for heat dissipation.

Well, it is here to realize heat dissipation.

The standard design does not show any big difference from other smart bulbs. However, if you look carefully, you will find that there is a small hole above the connector of the HEI lamp.

This is the sound pickup hole. The working principle of HEILIANG is to make a digital voice control sound through the mobile phone speaker, while the bulb receives the sound through the sound pickup hole, decodes the sound, and then performs a series of operations.

When using for the first time, first scan the QR code on the package. At this time, you need to connect to the network for operation. You cannot connect without the network. And at this time, pay attention to turning on the volume of mobile phone media, which should be at least half of the volume. If it is too low or muted, you can't control it. After scanning the code, click the pop-up connection to enter the mobile browser interface, and you can directly see the control interface of HEILIANG. On this page, we can use our mobile phone to control the switch, brightness, color temperature, etc. The digital dial adjusts the brightness of the bulb, and supports 1-10 The higher the number, the greater the brightness. Bottom on and off Be responsible for the switch of the bulb. (One place was found during the actual test BUG ——Click off When the key turns off the light bulb, there is no need to click on Button, click any controllable item to activate the bulb) and the plus signs on the left and right sides of the bottom are responsible for controlling the color temperature, which can five Level color temperature adjustment.

The yellow plus sign means to increase the color temperature of warm colors, and the white plus sign means to increase the color temperature of cold colors. By adjusting the plus sign, the small bulb on the digital disc will display different color temperature and brightness levels.

In the browser control interface, click on the upper right corner to buy Hei Deng (including mail) in the official mall, and just place an order step by step.

In order to truly get rid of the Internet to control the HEILIGHT, you need to install "HEILIGHT REMOTE CONTROL" on your mobile phone APP , click the APP Item can be downloaded and installed directly. After installation, there is no need for browser networking control.

Web side and APP The control interface of the terminal is roughly the same, with several different details. customary APP There are no download and purchase buttons. Instead, there are group control buttons. Another difference is that the digital turntable adds page turning animation effect when converting numbers. The original browser is static when converting numbers. In addition, APP The version supports the taskbar display control button without opening it APP It can also be controlled.

If multiple groups of bulbs can be linked after purchase, you can control each group of lamps in groups or control one lamp separately. You can enjoy yourself as you like.

Hey, although the lamp currently supports warm white dual color, the voice control command is relatively simple. If you add it later RGB After the function of changing colors and changing colors with music, I believe that it can be loved by more people. After all, it has made the control method and price more acceptable to people. It can not be said that it is a product full of surprises that makes people look at it differently.

Demo

Play with Lights

Although the manufacturer delivered two pieces of stickers for switches, for people like the author who love beauty, it is not very beautiful to stick two large stickers on the walls or furniture at home, and there is also the possibility of abrasion. After several days of struggling, the author found several ways to play and shared them with everyone.

The first way is to take a picture of the QR code on the package box. Note that the picture is saved to the album. It is better to take the upper and lower text parts when taking a picture. In the future, when there are many pictures in the phone album, you can know what they are when you delete them. The advantage of this is that you don't have to stick stickers everywhere, and you don't have to go to the QR code to scan. It's really a good news for lazy people. After saving, we only need a software that can scan the QR code (such as WeChat scanning three hundred and sixty The browser's code scanning function three hundred and sixty The code scanning function of the security guard). It should be noted here that the software that supports scanning QR codes from photo albums is acceptable.

The second way is to record and save the voice control sound. After several days of testing, the author found that each control sound of the HEI light is fixed. Record several groups of sounds you want to control with your mobile phone. You don't need to turn on the light bulb when you want to control it APP , just play the recording directly.

Video presentation: