It is inevitable that the mobile phone will bump and fall during use, which will cause damage to the screen. If you have purchased the screen shatter accident insurance for your phone, please skip this tutorial and contact the seller and insurance company directly. They will Pay for your broken screen. What should I do if I don't buy insurance for broken screens? Scheme 1: Send it to the maintenance shop. Backup the important data in the phone to the computer before sending it for repair (the broken screen will not affect the connection between the phone and the computer), and delete the private text in the phone (except if you want someone to help you publish it online). Scheme II: self start. It is not difficult to replace the display screen as long as there are appropriate tools and the process is followed.

Tools and accessories required:

Screwdriver: one small cross screwdriver and one * 0.8 screwdriver

Skid: Skid or plastic card

Strong glue: slow setting type

Display screen: Meilan note2 adopts full fit screen, and select the display assembly including touch screen when purchasing

start:

1. Remove the SIM card bracket, and use a * 0.8 screwdriver to remove the two screws at the bottom.

2. Use a pry board to cut in the gap between the right housing and the screen, and cut off the internal clips along the edge (there are many clips between the methylene blue note2 housing and the middle frame, so avoid cutting in from the volume key position) to pry the housing away from the middle frame.

3. Remove 7 screws from the lower protective plate and remove the protective backplane.

4. Pry off the power connector. If the Meilan note2 battery needs to be replaced due to aging, the battery can be replaced in this step.

5. Pry off the sub board, key connector and RF antenna.

6. Remove the screw fixing the headphone socket and remove the headphone socket; Then remove the three black screws on the motherboard.

7. The connecting wires of display screen and touch screen are located on the back of the circuit board. Pry the two wires and remove the circuit board.

8. The display screen of Magenta blue note2 is pasted on the aluminum magnesium alloy middle frame with curing adhesive, and the removal of the display screen is laborious. Since the display is broken, you don't need to be too careful to remove it. The curing adhesive is mainly concentrated on the top and bottom, and less on the side. When disassembling, be careful not to damage the dust film and mBack button of the receiver.

9. Use the special glue for the screen to inject glue along the original glue mark. Note that the glue is not too much, and install a new display screen.

10. After the glue has solidified, replace the phone in order.

Bring a fresh and hot video of dismantling the machine, which will give you a brand new experience of dismantling the machine!
wechat number: jiuyaochai