At the beginning of this year, Foream, a domestic sports camera brand, acquired Drift Innovation, a European sports camera company, and launched Foream X1, a wearable Internet camera. Foream X1 is equipped with an 8 megapixel camera, supports 1080P video recording, and has 1160mAh batteries. It can shoot high-definition video for three hours continuously.

Despite its shooting ability, its appearance is bright enough in the head mounted camera. Before the detailed evaluation comes out, let's send a picture appreciation.

Packaging and accessories

The machine is packed in kraft paper boxes. The front is the product drawing outlined by lines, and the back is the simple product parameters.

In order to protect the machine, there is a cushion sponge pad on the inner layer of the upper cover of the package, and the machine bracket is covered with flannelette, so it feels very comfortable.

In terms of accessories, in addition to the use guide and warranty card, it also includes a velvet bag for the head camera, a fixing strap and a data cable.

The mirco USB cable conscientiously adds an anti-interference magnetic ring, and the wire material is very thick.

Foream's English logo is printed on the head strap, with velcro for fixing on the outside and a full circle of anti slip pad on the inside.

Appearance and workmanship

The machine is available in multiple colors, and the two engineering machines we have here are Charm Red and Volt.

positive

bottom

back

The whole body of the machine is pink, with skin like coating on the surface. It has a good anti slip feel, and the inside is a velveteen layer for Velcro fixing.

The fuselage line is matched with a matte surface, which makes it look good.

The main camera inclines slightly downward, and the convex top can play a certain role in shading. On the left side of the lens is a microphone and a work indicator, and on the left side is a honeycomb opening for speakers.

The bottom of the camera is the interface cover, and the inside is the micro SD card slot, the micro USB interface, and the reset button. On the right side of the interface is the power switch, which can also be used to switch between photographing and video recording modes. On the far side is the WiFi connection button.

Wifi and power indicator light are placed on the right mirror leg. At the end of the mirror leg is a 3.5mm connector, which can connect headphones/microphones and other accessories. It can even be used for charging, but related accessories need to be purchased separately.

Below the mirror leg, you can see the snaps on the front and rear panels of the camera.

There is a shutter/video button on the left mirror leg, and the model name, battery capacity and place of origin information are on the end.

Velcro flannelette is covered on the inside of the camera, which can be easily attached to the head strap.

At the same time, the color of the fluorescent yellow engineering machine is very bright.

The fuselage layout is the same as that of the pink version. It is also the design of outer skin like coating and inner flannelette.

In general, the workmanship and appearance design of the machine are good, and the detailed test of its use experience and shooting level will be carried out in the recently completed evaluation. Please look forward to it.