The Meitu mobile phone has been popular with many girls since it was released. Now the Meitu mobile phone has developed and updated to the third generation (but its name is M4). Of course, the main feature of the Meitu mobile phone is self portrait beauty. How will the appearance of the previous generation of Meitu mobile phone change? Let's first look at the unpacking of Meitu M4.
The packaging design of Meitu mobile phone 4 is more grand than that of the previous generation Meitu. It adopts a flat, long and square design, and the inner box is still rose gold color matching.
Pull out the inner box, and the words of the concept version are printed on the white outer box and the rose gold inner box.
Open the inner box to see the Meitu mobile phone 4 and related accessories. This time, the accessories in the box are more monotonous, only the data cable and power adapter.
Meitu 4 has been pre coated when it leaves the factory. Instead of the factory film, it is a normal mobile phone protective film. Just carefully tear off the outermost protective film.
The initial feel is OK, but the phone is relatively narrow and long, and the sharpness of the four corners is obvious, which is slightly prickly.
Meitu 4 uses a 4.7 inch screen, but the resolution is only 720P. The MT6752 eight core 64 bit processor is used as the processor, 2GB of RAM and 32 GB of built-in memory. It supports the 2G, 3G and 4G networks of Unicom Mobile. The design of the icon is still a long oval icon like this nail
Above the front is the earpiece, with a 13 megapixel IMX214 camera in front and a sensor next door.
At the bottom is the traditional three King Kong, with backlight.
In fact, the overall appearance of the Meitu mobile phone 4 is not different from the previous generation of Meitu mobile phones.
On the left side of the mobile phone is the volume key, which also has rose color matching, and the girl heart is also rampant.
The SIM card slot is arranged on the upper right side of the phone.
Then there is a photographing button near the center of the side of the phone. Long press it to directly enter the photographing interface. When taking a selfie, press the selfie button to enter the timed selfie. After pressing it for 2 seconds, it will automatically take a photo.
The position of the selfie key is reasonable. If the left hand holds it normally, you can use the index finger and middle finger to press it, while the right hand holder can use the thumb to press the photo key.
The bottom is USB interface and speaker, and the top and bottom of the phone are made of metal.
The top position is the 3.5mm headphone connector and power button.
This time, the design of the Meitu mobile phone is relatively long on the chin, and when you roll over your back, you will feel that the whole mobile phone is more narrow and long.
The back is also the 13 megapixel camera of the IMX214. It says: 13.0 MEGA PIXELS X2 means that the front and back of the phone use the 13 megapixel camera of the IMX214.
There is also a logo of Meitu at the bottom. What's more, obsessive-compulsive disorder, Taurus, and Virgo can't bear is that they directly paste the IMEI code of the phone on the back of the phone, and this sticker is an ordinary self-adhesive sticker, which can easily leave traces if you tear it off.
1A output power adapter delivered in the box.
There is also a USB data cable with a flat plug, which also comes with an assembly line accessory.
In addition, there was also a Meitu gift bag, which was divided into three layers.
The first floor is Meitu's notebook.
There are also some accessories on the second floor. On the left is the toughened glass film of the Meitu mobile phone, in the middle is the Bluetooth camera remote control, and on the right is the Meitu mobile phone case.
The Bluetooth remote control is very small, very good.
Hmm... the mobile phone case as a gift
The last layer is Meitu's cultural shirt.
This is the end of this simple unpacking experience. This week, there will be a video of girls' hands-on experience. Remember to watch it carefully.
