Meizu MX4 Pro was officially released in Beijing on November 19. Two months later, Meizu brought us a bigger, faster and stronger MX4 Pro. At the same time, Meizu MX4 Pro also returns to the music route and is equipped with professional audio chips. We will go to the press conference site to experience this product immediately.
·
The biggest difference between MX4 Pro and the previous MX series products is the home key. Due to the need to give consideration to the front pressing fingerprint recognition, a round corner rectangle home key is used. I also know what you want to say - Samsung, right
Close up of the entity home key. There is a circle of silver metal around the fingerprint recognition.
The back is the same as the MX4. From top to bottom, there are cameras, led fill lights and brand logos. However, the radian of the back cover is flatter than the MX4.
The rear camera configuration is the same as that of the MX4. It is also a Sony 20.7 megapixel camera, a 1/2.3 inch IMX220R sensor, and a dual color temperature led fill light.
The top design is also completely consistent with the MX4. The 3.5mm headphone connector, noise reducing microphone and power button are all in the same position as the metal partition layer.
On the left is the volume key.
The bottom layout is also identical to the MX4.
The back cover can still be removed. The only purpose of removing the back cover is to insert and unplug the SIM card, because the MX4 Pro is still not removable. The MX4 Pro has a new NFC module, so you can see that there are coils on the back cover.
Comparison of Xiaomi 4, MX4 Pro and MX4.
It can be seen that the MX4 Pro and MX4 are almost identical in appearance, but the MX4 Pro needs to be larger and its back is relatively flat
Galaxy Note 4, MX4 Pro, and iPhone 6 Plus.
Galaxy Note 4, MX4 Pro, iPhone 6 Plus, and MX4 are also 5.5 inches, and MX4 Pro is smaller than iPhone 6 Plus.
The MX4 Pro uses a 5.5 inch 2560 * 1536 resolution IPS screen, which has exceeded the traditional "2K" level in terms of resolution. The color gamut reaches 72% NTSC, and the brightness is lower than that of the MX4. In terms of actual display effect, this screen is really high in definition and excellent in color performance.
Even if we zoom in the title bar to the extent shown in the figure, we will not feel that the font is not fine.
The MX4 Pro adopts the Flyme 4.1 system. Compared with the latest Flyme 4.0.4 on the MX4, it is not a big upgrade, so it is almost the same in appearance.
The drop-down list adds the functions of NFC and levitation ball.
The levitation ball is a new function of MX4 Pro for large screen operation. The position of the levitation ball in the figure is on the weather plug-in. Click it to perform the return operation. Pull down to expand the notification bar. Swipe left and right to switch applications.
The MX4 Pro uses the Flyme OS 4.1A system based on Android 4.4.4.
MX4 Pro has added NFC module, which can add mode switching of various NFC labels in the setting.
In addition to fingerprint identification, the MX4 Pro's entity home key can also achieve two functions through touch. It can be set to return to the previous level or to the desktop. It is recommended to set it to return to the previous level. Since there is a silver circle around the entity home key, the home key is sagging as a whole, and it will be slightly inconvenient to achieve return through upward strokes.
Long press the home key can also be set as a voice assistant or turn off the screen.
The MX4 Pro uses an Exynos 5430 processor, which is composed of a quad core Cortex-A7 1.5GHz and a quad core Cortex-A15 2.0GHz big LITTLE architecture, higher frequency than Galaxy Alpha, CPU core version r0p4.
This Exynos 5430 can indeed be called a "customized version", which is more frequent than Samsung itself.
MX4 Pro system kernel version 3.10.9, with 3G memory.
The GPU of the MX4 Pro is Mali-T628 MP6, with a frequency of 600MHz, and supports OpenGL ES 3.0.
We used GFXBench 3.0 to test the graphics performance of the MX4 Pro. Both Manhattan and Tyrannosaurus Rex had better off screen frames than Snapdragon 801. The performance was good, and the opening performance was comparable to that of the MX4 with the G6200+1080P screen. The performance of Mali-T628 MP6 under the action of 20nm and high frequency is still considerable.
Let's take a look at the performance in the game. The GPU frequency in the game is 420MHz most of the time, which is not less than the dramatic frequency reduction of Galaxy Alpha.
In the game, the Cortex-A7 has always maintained a high frequency of 1.5GHz, while in the balanced mode, there are only two Cortex-A15 cores, and the highest frequency is only 1.8GHz.
After the performance mode is enabled, the Exynos 5430 of the MX4 Pro can be fully opened with eight cores, and the Cortex-A7 has been stable at 1.5GHz.
In some moments, Cortex-A15 can reach the maximum frequency of 2.0GHz.
On the whole, we are satisfied with the performance of the MX4 Pro. Exynos 5430 has advanced features such as 20nm technology, 17GB/s memory bandwidth, and so on. This kind of strength can cope with 2K level screens and performs well in daily use. In the game, because the GPU has a certain frequency reduction phenomenon, the specific smoothness and frame number will be tested in detail after we get the evaluation machine.
The MX4 Pro and MX4 are basically the same in terms of photographing hardware, and the photographing interface is almost the same. However, the MX4 Pro uses a more powerful ISP chip, and we will also add a sample comparison between the two in the subsequent evaluation.
The MX4 Pro uses the HiFI level audio chip combination ES9018K2M and AD1612, which is superior to the Xplay3S in terms of hardware configuration.
The MX4 Pro is also equipped with Hi Fi Sound settings, which can adjust different gains according to the impedance of the headset, while supporting line output.
Seen from the actual listening sense, the sound quality of the MX4 Pro in the mobile phone can really be called the level of the first echelon Although the author has not been on the spot for a long time, its excellent analysis and relatively balanced sound style are impressive. We are also looking forward to the sound quality performance of the official version of MX4 Pro.
A major improvement of the MX4 Pro is that it adds the front press fingerprint recognition. The use method is similar to that of the iPhone. After the screen is lit, we can use the fingerprint recognition module to unlock.
There is also fingerprint identification management in the settings. You can open fingerprint identification unlocking and fingerprint payment.
