Under the influence of foreign sports, domestic intelligent wearable products have sprung up like mushrooms. While most of these smart devices that can record the state of movement, sleep quality and other conditions are worn on the wrist, the Veari Valery team broke the convention and launched a Fineck smart necklace, moving from a smart watch to a smart necklace. Today we have got the engineering machine of Fineck smart necklace.

Unpacking

▲ The traditional square packaging has a layer of binding outside the box.

▲ The front of the binding is a beautiful model corresponding to the official website. The words "Fineck Smart Necklace" are printed on the lower right corner.

▲ There is a big difference between the back and the front (the difference in mind), and the beautiful model has become a man alive.

▲ The side of the edging is still the concept picture of the product wearing, and there is some aesthetic fatigue. At the bottom of the concept picture is the card introduction of the product characteristics.

▲ The "engineering machine" label and product size can be seen from the hollowing out of the binding.

▲ Remove the binding, and the inside is a pure black box, which is slightly low-key. It is worth noting that the binding and the outer box are very tight, and it is difficult to remove them smoothly. Those who can't wait to see the product or impatient partners should directly destroy the binding.

▲ The transparent upper cover instantly improves the style of the product, and you can see the real product without completely dismantling it. There is only one Fineck logo on the transparent cover.

▲ The upper and lower packaging similar to that of iPhone is adopted. What's remarkable is that the upper end of the outer box can be picked up with one hand. Is this to compare with the binding?

▲ The whole necklace is ingeniously folded on a plastic plate, and only the movement and pendant can be seen on the front.

▲ The silicone soft belt can be seen from the back of the plastic plate, which has a very artistic shape.

▲ In order to prevent the plastic sheet from scratching the silicone soft belt, the zero distance contact of the chain is a silicone card pad.

▲ Mark a "pull" on the top and bottom of the card pad to remind the user of the correct opening method. There are four bumps at the bottom of the "pull" word to increase the friction force, which shows the attention of Veari Valery team to the product.

▲ The orange and black matching at the lower end of the packing box is very eye-catching and will not be forgotten because the necklace is taken out.

▲ Orange instruction manual and data cable outer box.

▲ The activation method of Fineck is introduced around the data cable box.

▲ Once the traditional round data line is changed, the square with sharp edges and corners looks good.

▲ Magnetic round special charging connector.

▲ There is not much content in the manual, only four simple pages.

▲ However, a small printing error was found in the manual after careful editing. "US Dow Corning TPVIS medical grade silica gel" rather than "Germany", in fact, this problem appeared on Fineck's official website at an early stage. The author timely communicated with the Veari Valery team. Now the official website has been corrected, but the product specification has not yet been updated.

Product details

▲ It is quite different from traditional female necklaces. Black necklaces are rare on the market.

▲ The front face of the rear host shell adopts an elliptical pattern outlined by geometric lines. There are 4 LED lights built in the connection of the ellipse center, which have been specially processed in the process. It is difficult to find with the naked eye when the LED is off.

▲ There are two charging contacts on the back, and a small screw on the four corners, which is used to connect the titanium shell and the silicone soft belt.

▲ The word "Fineck" is printed on one side of the host. It can be clearly seen that the host is composed of titanium metal and silica gel, but the combination is very tight, and the gap cannot be observed with the naked eye.

▲ The front pendant is also made of pure titanium, and there is a magnet at both ends of the soft belt.

▲ The silica gel soft belt and the front pendant are also connected by screws, and there is a screw hole on the side of the pendant.

▲ Most necklaces are US Dow Corning TPVIS medical grade silicone soft belts. According to the actual measurement, the silicone feels very different, and it feels like a "powder" without leaving fingerprints and sweat stains.

PS: According to the original plan, the Veari Virui team will release new firmware today, but received a message this morning that they will not update the firmware for the time being. Since the current firmware is not very stable in data collection (engineering machine), the author will wait for the new firmware to come out before sharing the software part of Fineck's smart necklace.