Speaking of smart watches, the first thing that comes to mind, i 'm afraid Moto 360, the first round dial in China Smart watches are inWatch π 。 In addition to the same traditional watch style, inWatch π is also the first smart watch product that will extend its life to six months.
It was originally scheduled to ship today (September 30), but its manufacturer, Yingqu Technology, issued a "letter of apology for ticket skipping" yesterday. The delivery of new products was delayed to October 10 due to client problems. However, its engineering machine has been exported. Now let's take a look at its true appearance.
Packaging and accessories
▲ The package is not a square box commonly used for wristwatches, but a "chopstick style" strip package.
▲ The words "connect to meizu" are printed on the top of the package.
▲ The back of the box is the QR code used to download the client. The adaptation problem of this app is the official reason for ticket skipping. At the deadline, the website is still empty
▲ Pull out the white "binding" of the outer layer, and the inside is a watch box made of imitation leather.
▲ The first layer of the watch box is the watch body.
▲ The watch is surrounded by a simple to a bit crude plastic tray, while the watch itself is much smaller than expected.
▲ In addition to the warranty and instructions, the most special thing on the second layer of the meter box is the screwdriver and two button batteries.
▲ Did the engineer deliberately put them into expression (⊙_ ⊙)
▲ The button battery model is Panasonic CR2032. According to official data, its capacity should be 210mAh. In fact, I really doubt that the capacity of this size can really achieve the 4-6 month range advertised?
▲ The attached screwdriver is very small, and the top is very sharp. Please pay attention to safety when using it.
▲ Family photo. The charger and data cable are saved without charging.
Exterior body
▲ At first glance, it really resembles moto 360. Of course, the round dial with a narrow border is almost the same shape
▲ Compared with the wide band of moto 360, the band of inWatch Pi is much thinner.
▲ The dial glass will have a delicate reflective effect under the side light, but it is really easy to get fingerprints.
▲ The glass of the dial is closely attached to the stainless steel frame, and the dial glass is slightly higher than the frame.
▲ Below the 12 scales of the dial are 12 LED lights, and the brand logo is in the middle.
▲ The way to display time is to turn on the light. After being awakened, the light for hours will always be on, and the light for minutes will flash. Since there are only 12 lights, the accuracy can only reach 5 minutes.
▲ The back center is a 3C certification sticker, the top is the π logo of the watch, and the periphery is four fixing screws.
▲ The back is the common concentric circle wire drawing of watches, and the size of the fixing screw is one yard smaller than the screw of the eyeglass frame.
▲ The workmanship of the dial is quite excellent, and it is quite competitive. The official nominal dial width is 3.5 mm, but it is actually a little small (refer to the size of the index finger in the figure above).
▲ There is also metal wire drawing on the side, and the back cover fits fairly flat and tight.
▲ There are traces of chamfering and polishing at the junction with the watchband, but the watchband is not connected to the dial in full width.
▲ There are polished chamfers similar to the iPhone 5s frame on the top and bottom of the side.
▲ The buckle of the watch strap even has a brushed pattern.
▲ The watchband is black leather, and the belt blindness cannot identify whether it is genuine leather for the time being.
▲ Compared with the care of the metal part, the belt part is a little weak. The watchband is not joined with suture, but glued with glue.
▲ The color of internal materials can be seen in the holes on the other side of the belt.
▲ You can also see the trace of body fitting on the inner side of the watch strap.
▲ From the angle of the watchband, it can be basically concluded that it should be made of imitation leather. I feel that the workmanship of the dial has been let down. I hope the official version can improve the workmanship of the watchband or provide watchbands made of other materials.
Wearing effect
▲ The belt is moderately hard and soft, and the watch body is not heavy, so it is more comfortable to wear. In addition, the shape is close to the real watch, and the effect is harmonious.
▲ The light side watch will have a beautiful reflective effect.
▲ The LED light on the dial has good brightness, and the time display can be seen even under the large reflection.
▲ The time modeling is as above from the normal perspective. The dial supports the raise hand display and double click display. The raise hand display is adjusted sensitively, and normal shaking can also wake the dial.
Disassembly
▲ The official provides a screwdriver and battery. Unscrew the back cover screws to open the back cover. The white plastic around the battery actually only serves to fix the battery. Internally, the dial itself can be further reduced.
▲ Take off the battery. There are two rows of contacts with unknown functions in the upper left corner, which are covered with insulating tape. The circuit chip should be under the black sticker in the lower right corner.
▲ There are two protruding metal electrodes on the side.
▲ The back cover is surrounded by a ring of waterproof rubber pads, and the middle is a soft foam pad. In addition to cushioning, it is also used to separate the electrode and the metal back cover.
▲ The fixing screws are of two sizes, the big one is the fixing screw in the dial plate, and the small one is the back cover screw, both of which are very miniature (refer to the size of the tail finger on the left).
Although the "inClub" client of the tested inWatch pass version can search for the watch, it cannot connect. It seems that we have to wait until the special client comes out to connect _ (: б "∠)_
We will keep an eye on the progress of client launch at any time, and provide detailed evaluation for you in time. Please look forward to it.
