VSD3/VSD3S are the latest in ear earphones launched by VSONIC, and they are also the upgraded products of VSD1/VSD1S one year after its launch. The VSD3/VSD3S adopts a cavity shape similar to the diamond cutting style, and at the same time, it uses the design of changeable wires. The VSD3S was officially launched on June 1. We got the official version of VSD3S at the first time. Let's have a look at this new work:

The VSD3S adopts a square outer package, and the earphone body can be seen from the outside ▼

Some brands are printed on the back of the package ▼

Open the plastic cover above the package, you can see that there is a cloth bag on the left and VSD3S ▼ on the right

Take out the accessories in the box. There is a black cloth bag, three pairs of silicone sleeves of different sizes (including a pair on the headset), a pair of double section sleeves, a pair of sponge sleeves, a pair of ear loops, and a warranty card ▼

The cavity of VSD3S adopts black transparent design, and the wire material is 1.3 m oxygen free copper material ▼

The close-up of the VSD3S body shows that the surface of the headset is very shiny, sharp and distinctive ▼

Close up ▼ of distributor

3.5mm headphone interface, engraved with brand logo ▼

The back of the headset is smooth ▼

By default, the headset uses a pair of medium black silicone sleeves ▼

There is a vent near the pin on the front of the headset ▼

There is also a vent at the back of the earphone near the catheter. These two holes play a role in tuning. Different cavity shapes and structures will have a significant impact on the sound of dynamic unit earphones ▼

VSD3S is designed with replaceable wire, and the pin can rotate. This kind of pin is common on Shure earphones ▼

Since the earphone has just been unpacked and has not been warmed up, we will briefly talk about the listening sense of the VSD3S:

The first thing to praise is that the VSD3S is very comfortable to wear. When wearing it around the ear, there is no strong sense of pressure. The cavity is small, and it is very close to the ear when wearing it. In terms of sound, the VSD3S is a neutral earphone with middle and lower sides, and the sound is generally cold. The low-frequency performance is impressive, the low-frequency strength is good, and the playback speed is also fast. The vocal distance is moderate, but there is obvious dental sound. However, the high frequency performance of VSD3S is not so eye-catching compared with the low frequency performance. In general, VSD3S is more suitable for performing pop music. Compared with VSD1, the sound quality has been improved to a certain extent. From the quality and sense of hearing, it can be regarded as an upgraded product with obvious improvement. Of course, it is too early to make a conclusion about the voice of the VSD3S. I believe it will perform better after it is fully warmed up.