Use experience of Jinli Fenghua 2 | Ainongji - 上海419贵族宝贝-上海后花园1314-上海品茶网-阿拉爱上海

Jinli Fenghua 2 This mobile phone is one of the first to use MT6589 processing chip. Last December, Taiwan chip manufacturer MTK released this quad core processor in Shenzhen. At that time, the press conference invited many domestic mobile phone manufacturers, including Lenovo, ZTE, Huawei, Jinli, Coolpad, TCL, etc., and Jinli Fenghua 2 was the first to adopt MT6589 Processor phone. The author also got this mobile phone before the Spring Festival, and now will share some experiences and feelings in the use of this month.

Simple and fast video evaluation:

When I got the phone, my first feeling was that the desktop was stuck. The desktop of Jinli had a good 3D effect. But it's a strange Caton! It is almost useless. In fact, many Android third-party desktop software or Android system's own desktop in the market are many times better than this desktop.

▲ Theme setting interface

In addition, Jinli provides a custom theme, and the interface of the custom theme is placed on its own desktop. Click on the theme to download the theme. The theme is not just to change the desktop icon or wallpaper. The call interface, SMS interface, lock screen style, and even the setting interface style will change. After using several themes, I found that they were all pretty good, at least I could feel the responsibility of Jinli for user experience. This form is similar to MIUI. Of course, MIUI can set and change more things.

In addition, it is difficult for the editor to understand, and Jinli is willing to spend time on customizing the system skin. But even a desktop is out of alignment. After getting the mobile phone, the author was almost frantic by Jinli's own desktop, and switched to the Go desktop that day. The problem was basically solved. As mentioned above, if you use the Go desktop, you cannot enter the theme.

In daily use, the whole machine runs smoothly. Without Caton, daily use is completely sufficient, and the screen transition reaction is rapid. For daily endurance test, the MT6589 adopts TSMC 28nm process, and the endurance of the whole machine is also very good. The author doesn't play many games, but there is no big problem in dealing with leisure games such as Temple Escape 2. Even if the highest picture quality is turned on, the frame rate picture element of the game can still be maintained. In case of heating, it is almost impossible to experience obvious heating during use.

Other problems are that GPS positioning is not accurate enough, and the outdoor accuracy is only more than 10 meters. Previously, the author used Defy. GPS positioning is very good, almost within one meter. In addition, you can also react quickly to the location movement. Fenghua 2 is still not fast enough in GPS response speed. If you are also a road junkie, owning Fenghua 2 will be a big challenge for you. After OTA is updated to the latest firmware of Jinli, the problem still exists.

The photo effect is something that the author appreciates very much. In the video evaluation, the author boldly used iPhone 5 to compare with it. There is a certain metering problem in the daytime. The metering is not accurate enough, and it is more gray. For the contrast of dark light shooting at night, Fenghua 2 did not perform very well in general. See the video sample analysis for details. Finally, in the anti shake ability test of video shooting, the author's analysis is that Fenghua 2 almost lacks the anti shake ability, but the picture is very clean and clear. It is obvious that the anti shake of iPhone sacrifices the image quality. However, the anti shake ability is extremely good, and the gap between the two is obvious.

▲ SIM2 card only supports 2G network

▲ Switch back to SIM1 to use Unicom 3G network

Although the author thinks that Fenghua 2 has already performed very well in standby mode, in special cases when 3G is required to switch to 2G (such as when going out to save power), it is found that the Jinli system does not have a switch option. If SIM1 is inserted with Unicom 3G card, only Unicom 3G can be used, and there is no option to switch to 2G. If necessary, you can pull out the SIM card and insert it into the SIM2 card slot. The SIM2 network only supports 2G. In any case, the author believes that such a design still has many inconveniences. This dual card dual standby is only equivalent to supporting two cards separately for 2G and 3G functions.

In fact, it is necessary to separate two cards to support 3G. If video calls are required, then it is necessary for each card to support 3G.

Finally, the official price of Fenghua 2 is 1799 yuan, which is still a little expensive in my opinion. If you add another 200 yuan, you can get millet 2. The experience and overall level will be different. In addition, many domestic computers are priced at 1000~2000 yuan, and Newman N2 has 720P resolution, 13 million pixel camera and Samsung Exynos processor, but the price is only 1499! In general, Fenghua 2 is not high only in terms of cost performance. But in terms of experience, this phone is still good at this price.